commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:

qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)

This patch fixes the problem by checking the pixman version.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add tcg and cpu model initialization.
Add gen_intermediate_code function.
Activate target in configure and add softmmu config.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds the relevant s390x feature xml files taken from gdb.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

commit 7537fe04 QMP: QMP/ -> docs/qmp/

Above commit has moved last QMP files to docs/qmp and it's not necessary
to create QMP directory. So remove it from configure.
Signed-off-by: NLiming Wang <liming.wang@canonical.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: NPaul Burton <paul@archlinuxmips.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.

v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: NPaul Burton <paul@archlinuxmips.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

VM Image on Archipelago volume is specified like this:

file.driver=archipelago,file.volume=<volumename>[,file.mport=<mapperd_port>[,
file.vport=<vlmcd_port>][,file.segment=<segment_name>]]

'archipelago' is the protocol.

'mport' is the port number on which mapperd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.

'vport' is the port number on which vlmcd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.

'segment' is the name of the shared memory segment Archipelago stack is using.
This is optional and if not specified, QEMU will make Archipelago to use the
default value, 'archipelago'.

Examples:

file.driver=archipelago,file.volume=my_vm_volume
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234,file.segment=my_segment
Signed-off-by: NChrysostomos Nanakos <cnanakos@grnet.gr>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Some non-linux systems, for example a system with
FreeBSD kernel and glibc, may declare struct mmsghdr
(in glibc) but may not have linux-specific header
file linux/ip.h.  The actual implementation in qemu
includes this linux-specific header file unconditionally,
so compilation fails if it is not present.  Include
this header in the configure test too.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

If --enable-stack-protector is used is used, configure script try to use
--fstack-protector-strong. In case it's not supported, --fstack-protector-all
is enabled. If both protectors are not supported, configure does not use
any protector at all without any notification.

This patch reports error when user requests stack protector to be used and
both protector modes are not supported. Behavior is not changed in case
user do not use any of --enable-stack-protector/--disable-stack-protector.
Signed-off-by: NMiroslav Rezanina <mrezanin@redhat.com>
[Fix non-POSIX operator in test. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: Nchenliang <chenliang88@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The existing test whether "-lm" needs to be included or not is
insufficient as it reports false negative on Fedora20/ppc64.
This happens because sin(0.0) is a constant value which compiler
can safely throw away and therefore there is no need to add "-lm".
As the result, qemu-nbd/qemu-io/qemu-img tools cannot compile.

This adds a global variable and uses it in the test to prevent
from optimization.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
[Use Peter's improvement on the test to fool LTO, and remove the
 now useless -lm addition in Makefile.target. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to allow out-of-tree iotests, create a symlink for the check
script in the build tree.

While doing so, also write configured options relevant to the iotests to
common.env in the build tree; currently, this is the command to invoke
Python 2.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

I don't see why tpm is disabled by default: it doesn't have any
external dependencies, or change default behavior. Leaving it disabled
is just going to cause it to bit rot.

Enable it by default, and add a --disable-tpm option.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The other tcg backends that support 32- and 64-bit modes
use the 32-bit name for the port.  Follow suit.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Vectoring the 32-bit build to the ppc64 directory.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Add detection of libnuma (mostly contained in the numactl package)
to the configure script. Can be enabled or disabled on the command
line, default is use if available.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.

Additional checks for validity:
  - requires `-numa node,memdev=..`
  - requires `-device virtio-net-*`

The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: NAntonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.

On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:

dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength

Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Enable KVM support for MIPS in the build system.
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NDoug Kwan <dougkwan@google.com>
Signed-off-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds a special build of u-boot tailored for the e500 platforms we
emulate. It is based on the current version of upstream u-boot which
contains all the code necessary to drive our QEMU provided machines.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Those options were not enabled by default, even when the build
environment would have supported them, so the corresponding
code was not compiled in normal test builds like on build bots.

[Building quorum by default "broke" qemu-iotests ./check 081.  It turns
out the 081.out master output was just bitrotted.  Fix this by updating
the error message.
--Stefan]
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Make configure detect gtk x11 backend and link libX11 then.  Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime).  Our gtk ui code should build and run fine on
any platform now.

This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a348.

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>

This change adds HOST_VARIANT_DIR so the various BSD OS dependent
code can be separated into its own directories rather than
using #ifdef's.

This may also allow an BSD variant OS to host another BSD variant's
executable as a target.
Signed-off-by: NSean Bruno <sbruno@freebsd.org>
Message-id: 1402246651-71099-2-git-send-email-sbruno@freebsd.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The check for big or little endianness relies on grep reporting
match/non-match on the generated binary. If the user specified
--binary-files=without-match in their GREP_OPTIONS, this will fail.

Let's follow what autoconf does and unset GREP_OPTIONS and CLICOLOR_FORCE
at the beginning of the script.
Reported-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

'-lrt' flag duplication/incorrect order
would cause 'undefined reference to clock_gettime' error during compilation time.

Before fix:
... -o qemu-bridge-helper qemu-bridge-helper.o    -lrt -pthread -lgthread-2.0 -lrt -lglib-2.0
After fix:
... -o qemu-bridge-helper qemu-bridge-helper.o    -pthread -lgthread-2.0 -lrt -lglib-2.0

Reference:
http://hi.baidu.com/sanitywolf/item/7a8b69c1e76dd220a0b50ab1Signed-off-by: NRick Liu <yrliu.ca@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adds support to compile QEMU with multiple tracing backends at the same time.

For example, you can compile QEMU with:

  $ ./configure --enable-trace-backends=ftrace,dtrace

Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.

This patch allows having both available without recompiling QEMU.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Choosing good addresses for them means we can use JAL for helper calls.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.

Put all our temporary files in a single temporary directory created
as a subdirectory of the build directory, so we can easily clean it up,
and don't need fragile or complicated code for creation to avoid it
clashing with temporary directories from other instances of QEMU
configure or being subject to attack from adversaries who can write
to /tmp.

Since the temporaries now live in the build tree, we have no
need to jump through hoops with a trap handler to try to remove
them when configure exits; this fixes some weird bugs where hitting
^C during a configure run wouldn't actually make it stop, because
we would run the trap handler but then not stop. (It is possible
to get the trap handler semantics right but it is convoluted largely
because of bugs in dash, so it is simpler to just avoid it.)

Note that "temporary files go in the build directory, not /tmp" is
the way autoconf behaves.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The configure option --with-gtkabi=3.0 is still supported, but no longer
needed when GTK+-2.0 is missing. When no GTK+ ABI is selected by the
user, configure first tries 2.0, then 3.0.

For some platforms (e.g. Windows) newer binaries of GTK+ are only
available for GTK+ 3.0. Now building on these platforms is a little bit
easier.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

While we still require the LONG DISPLACEMENT facility, defaults
have moved on since then.  Don't override the system compiler,
whose default may be set to z9-109 or later.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This reverts commit f915db07.

This commit is broken because it does not account for the
build tree and the source tree being different, and can cause
build failures for out-of-tree builds. Revert it until we can
identify a better solution to the problem.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org
Acked-by: NKevin Wolf <kwolf@redhat.com>

Currently all what's needed for single file libcacard/vcard_emul_nss.c
(libnss cflags) and hw/usb/ccid-card-emulated.c (libcacard includes)
together with the libs is added to global QEMU_CFLAGS and libs_softmmu.

Use the cflags only where really used (for two mentioned files), and
libs only where needed.

While at it, rename variables to better reflect reality: libcacard_*
is really nss_*.

This needs a bit more tweaking: $(NSS_LIBS) should not contain $glib_libs
(ditto for _cflags).  But in order to fix it, some more preparations
should be made first.  So add a FIXME comment.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, QEMU's iotests rely on /usr/bin/env to start the correct
Python (that is, at least Python 2.4, but not 3). On systems where
Python 3 is the default, the user has no clean way of making the iotests
use the correct binary.

This commit makes the iotests use the Python selected by configure.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It is only used with the simple trace backend.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit e26110cf added a check for shacmd to create a hash
for modules.  This check in configure is using bash construct &>
to redirect both stdout and stderr, which does fun things on some
shells.  Get rid of it, use standard redirection instead.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NFam Zheng <famz@redhat.com>

When source directory can be arrived at by two paths,
configure might misdetect an out of tree build.
The simplest way to trigger the problem is running
configure using a full path. E.g. (<firstpath> refers to qemu source
tree):
    ln -s <firstpath> <secondpath>
    cd <firstpath>
    <secondpath>/configure

A more practical way is when make runs configure automatically:

1. cd <firstpath>/; ./configure
    SRC_PATH=<firstpath>/ is written into config_host.mak
2. cd <secondpath>/; touch configure; make
    make now runs <firstpath>/configure, so configure
    assumes it's an out of tree build

When this happens configure overwrites parts of
the current tree with symlinks.

Make the test more robust: look for configure
in the current directory.
If there - we know it's a source build!
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.

Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.

Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Reconfiguring with a different --with-gtkabi or --with-sdlabi doesn't
trigger a remake. Generate an (unused) CONFIG_GTKABI/CONFIG_SDLABI
so config-host.h will actually give 'make' something to trigger on.
Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>