When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.

Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.

This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.

A warning in these cases is considered appropriate.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.

Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.

Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.

Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.

In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.

This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586

[Resolved conflict with commit 5abbf0ee
("block: Catch simultaneous usage of options and their aliases").  Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: NJun Li <junmuzi@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes the bug introduced by commit c6ac36e1 (vmdk: Optimize cluster
allocation).

$ ~/build/master/qemu-io /stor/vm/arch.vmdk -c 'write 2G 1k'
write failed: Invalid argument
Reported-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1411437381-11234-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

$ ./qemu-img create -f qcow2 overlay \
    -b 'json: { "file.driver":"ssh",
                "file.host":"localhost",
                "file.host_key_check":"no" }'
qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed.
Aborted

A similar crash also happens if the file.host field is omitted.

https://bugzilla.redhat.com/show_bug.cgi?id=1147343

Bug found and reported by Jun Li.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The while loop variabal is "bs1",
but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name.
Broken in commit a89d89d3, v1.7.0.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

input monitor patches: fix send-key release ordering
and new input-send-event command

# gpg: Signature made Thu 02 Oct 2014 09:10:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-input-20141002-1:
  add input-send-event command
  input: fix send-key monitor command release event ordering
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pixman: fix qemu_default_pixman_format (32bpp non-native endian)

# gpg: Signature made Thu 02 Oct 2014 08:47:20 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-console-20141002-1:
  pixman: fix qemu_default_pixman_format (32bpp non-native endian)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: cleanups, prepare for endianness switching

# gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20141002-1:
  vga: Add endian to vmstate
  vga: Make fb endian a common state variable
  vga: Rename vga_template.h to vga-helpers.h
  vga: Remove some "should be done in BIOS" comments
  cirrus: Remove non-32bpp cursor drawing
  vga: Simplify vga_draw_blank() a bit
  vga: Remove rgb_to_pixel indirection
  vga: Separate LE and BE conversion functions
  vga: Remove remainder of old conversion cruft
  vga: Start cutting out non-32bpp conversion support
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Which allows specification of absolute/relative,
up/down and console parameters.

Suggested by Gerd Hoffman.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 2e377f17 changed the ordering
of the release events as side effect.  Some guests are not happy with
that and don't recognise ctrl-alt-del any more.  This patch restores
the old last-pressed first-released behavior.

Cc: Amos Kong <akong@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental.  It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi.  This
is a pretty important feature.  Almost all the work here
was done by Fam Zheng.

I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.

This pull request is using the new subkey 4E6B09D7.

# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (39 commits)
  block/iscsi: handle failure on malloc of the allocationmap
  util: introduce bitmap_try_new
  virtio-scsi: Handle TMF request cancellation asynchronously
  scsi: Introduce scsi_req_cancel_async
  scsi: Introduce scsi_req_cancel_complete
  scsi: Drop SCSIReqOps.cancel_io
  scsi: Unify request unref in scsi_req_cancel
  scsi-generic: Handle canceled request in scsi_command_complete
  scsi: Drop scsi_req_abort
  virtio-scsi: Process ".iothread" property
  virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
  virtio-scsi: Batched prepare for cmd reqs
  virtio-scsi: Two stages processing of cmd request
  virtio-scsi: Add migration state notifier for dataplane code
  virtio-scsi: Hook up with dataplane
  virtio-scsi-dataplane: Code to run virtio-scsi on iothread
  virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
  virtio-scsi: Add 'iothread' property to virtio-scsi
  virtio: add a wrapper for virtio-backend initialization
  virtio-9p: fix virtio-9p child refcount in transports
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ac97: register reset via qom

# gpg: Signature made Tue 30 Sep 2014 12:32:29 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-20140930-1:
  ac97: register reset via qom
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc, virtio, misc bugfixes

A bunch of bugfixes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vl: Adjust the place of calling mlockall to speedup VM's startup
  pc-dimm: Don't check dimm->node when there is non-NUMA config
  pci-hotplug-old: avoid losing error message
  Revert "virtio-pci: fix migration for pci bus master"
  loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Changes by kraxel:
 * Remove bochs dispi interface changes.  We'll do that in
   a different way to make sure we don't conflict with
   possible future bochs dispi interface changes.
 * keep live migration bits.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

And initialize it based on target endian
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

It's no longer a template, we only instanciate the file once.

Keep it a #included file so the functions remain static.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Not all platforms have a VGA BIOS, powerpc typically relies on
using the DISPI interface to initialize the card.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

We only draw cursor on non-shared surfaces (so it seems...) and
these are always 32bpp
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

The test for surface_bits_per_pixel() isn't necessary anymore,
the 8bpp case never happens.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

We always use rgb_to_pixel32 nowadays.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Provide different functions for converting from an LE vs a BE
framebuffer. We cannot rely on the simple cases always being
shared surfaces since cirrus will need to always shadow for
cursor emulation, so we need the full set of functions to
be able to later handle runtime switching.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

All the macros used to generate different versions of vga_template.h
are now unnecessary, take them all out and remove the _32 suffix from
most functions.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Nowadays, we either share a surface with the host, or we create
a 32bpp ARGB console surface.

So we only need to draw/convert to 32bpp, enabling us to remove
all but one instance of vga_template.h inclusion (to be further
cleaned up), rgb_to_pixel_* etc...
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>

Bug breaks SDL display of bigendian guests on little endian hosts.
Reported-by: NBALATON Zoltan <balaton@eik.bme.hu>
Reported-by: NValentin Manea <valentin.manea@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

regular bitmap_new simply aborts if the memory allocation fails.
bitmap_try_new returns NULL on failure and allows for proper
error handling.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.

Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.

Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.

Let's move it to scsi-bus.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.

Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.

It will also make implementing asynchronous cancellation easier.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic
callbacks check io_canceled flag similarly to scsi-disk.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tcg updates

# gpg: Signature made Mon 29 Sep 2014 19:58:04 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/tcg-next-201400729:
  tcg: Always enable TCGv type checking
  qemu/compiler: Define QEMU_ARTIFICIAL
  tcg-aarch64: Use 32-bit loads for qemu_ld_i32
  tcg-sparc: Use UMULXHI instruction
  tcg-sparc: Rename ADDX/SUBX insns
  tcg-sparc: Use ADDXC in setcond_i64
  tcg-sparc: Fix setcond_i32 uninitialized value
  tcg-sparc: Use ADDXC in addsub2_i64
  tcg-sparc: Support addsub2_i64
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm:
 * more EL2/EL3 preparation work
 * don't handle c15_cpar changes via tb_flush()
 * fix some unused function warnings in ARM devices
 * build the GDB XML for 32 bit CPUs into qemu-*-aarch64
 * implement guest breakpoint support

# gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140929:
  target-arm: Add support for VIRQ and VFIQ
  target-arm: Add IRQ and FIQ routing to EL2 and 3
  target-arm: A64: Emulate the SMC insn
  target-arm: Add a Hypervisor Trap exception type
  target-arm: A64: Emulate the HVC insn
  target-arm: A64: Correct updates to FAR and ESR on exceptions
  target-arm: Don't take interrupts targeting lower ELs
  target-arm: Break out exception masking to a separate func
  target-arm: A64: Refactor aarch64_cpu_do_interrupt
  target-arm: Add SCR_EL3
  target-arm: Add HCR_EL2
  target-arm: Don't handle c15_cpar changes via tb_flush()
  hw/input/tsc210x.c: Delete unused array tsc2101_rates
  hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
  hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
  hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
  configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
  target-arm: Implement handling of breakpoint firing
  target-arm: Implement setting guest breakpoints
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We are ready, now let's effectively enable dataplane.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>