Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-10-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Rather than limit total TB size to PAGE-32 bytes, end the TB when
near the end of a page.  This should provide proper semantics of
SIGSEGV when executing near the end of a page.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-9-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-8-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Removed ctx->insn_pc in favour of ctx->base.pc_next.
Yes, it is annoying, but didn't want to waste its 4 bytes.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-7-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

The name gen_lookup_tb is at odds with tcg_gen_lookup_and_goto_tb.
For these cases, we do indeed want to exit back to the main loop.
Similarly, DISAS_UPDATE performs no actual update, whereas DISAS_EXIT
does what it says.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-6-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

These are all indirect or out-of-page direct jumps.
We can indirectly chain to the next TB without going
back to the main loop.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-5-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-4-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

We have exited the TB after using goto_tb; there is no
distinction from DISAS_NORETURN.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-3-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

The raise_exception helper does not return.  Do not generate
any code following that.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-2-richard.henderson@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

target-arm queue:
 * arm_gicv3_kvm: fix migration of registers corresponding to
   IRQs 992 to 1020 in the KVM GIC
 * aspeed: remove ignore_memory_transaction_failures on all boards
 * aspeed: add support for the witherspoon-bmc board
 * aspeed: add an I2C RTC device and EEPROM I2C devices
 * aspeed: add the pc9552 chips to the witherspoon machine
 * ftgmac100: fix various bugs
 * hw/arm: Remove the deprecated xlnx-ep108 machine
 * hw/i2c: Add trace events
 * add missing '\n' on various qemu_log() logging strings
 * sdcard: clean up spec version support so we report the
   right spec version to the guest and only implement the
   commands that are supposed to be present in that version

# gpg: Signature made Fri 08 Jun 2018 13:36:37 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180608: (31 commits)
  sdcard: Disable CMD19/CMD23 for Spec v2
  sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)
  sdcard: Disable SEND_IF_COND (CMD8) for Spec v1
  sdcard: Add a 'spec_version' property, default to Spec v2.00
  sdcard: Allow commands valid in SPI mode
  sdcard: Update the Configuration Register (SCR) to Spec Version 1.10
  target/xtensa: Add trailing '\n' to qemu_log() calls
  RISC-V: Add trailing '\n' to qemu_log() calls
  target/m68k: Add trailing '\n' to qemu_log() call
  target/arm: Add trailing '\n' to qemu_log() calls
  stellaris: Add trailing '\n' to qemu_log() calls
  hw/mips/boston: Add trailing '\n' to qemu_log() calls
  hw/core/register: Add trailing '\n' to qemu_log() call
  ppc/pnv: Add trailing '\n' to qemu_log() calls
  xilinx-dp: Add trailing '\n' to qemu_log() call
  hw/digic: Add trailing '\n' to qemu_log() calls
  hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call
  hw/i2c: Add trace events
  hw/arm: Remove the deprecated xlnx-ep108 machine
  ftgmac100: remove check on runt messages
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

These commands got introduced by Spec v3
(see 0c3fb03f and 4481bbc7).
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-7-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-6-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

CMD8 is "Reserved" in Spec v1.10.

Spec v2.00 introduces the SEND_IF_COND command:

  6.4.1 Power Up

    CMD8 is newly added in the Physical Layer Specification Version
    2.00 to support multiple voltage ranges and used to check whether
    the card supports supplied voltage. The version 2.00 or later host
    shall issue CMD8 and verify voltage before card initialization.
    The host that does not support CMD8 shall supply high voltage range.

Message-Id: 201204252110.20873.paul@codesourcery.com
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-5-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As of this commit, the Spec v1 is not working, and all controllers
expect the cards to be conformant to Spec v2.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-4-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

From the "Physical Layer Simplified Specification Version 1.10"
  Chapter 7.3 "SPI Mode Transaction Packets"
    Table 57: "Commands and arguments"
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-3-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The initial implementation is based on the Specs v1.10 (see a1bb27b1).

However the SCR is anouncing the card being v1.01.

The new chapters added in version 1.10 are:

    4.3.10 Switch function command

    Switch function command (CMD6) 1 is used to switch or expand
    memory card functions. [...]
    This is a new feature, introduced in SD physical Layer
    Specification Version 1.10. Therefore, cards that are
    compatible with earlier versions of the spec do not support
    it. The host shall check the "SD_SPEC" field in the SCR
    register to recognize what version of the spec the card
    complies with before using CMD6. It is mandatory for SD
    memory card of Ver1.10 to support CMD6.

    4.3.11 High-Speed mode (25MB/sec interface speed)

    Though the Rev 1.01 SD memory card supports up to 12.5MB/sec
    interface speed, the speed of 25MB/sec is necessary to support
    increasing performance needs of the host and because of memory
    size which continues to grow.
    To achieve 25MB/sec interface speed, clock rate is increased to
    50MHz and CLK/CMD/DAT signal timing and circuit conditions are
    reconsidered and changed from Physical Layer Specification
    Version 1.01.

    4.3.12 Command system (This chapter is newly added in version 1.10)

    SD commands CMD34-37, CMD50, CMD57 are reserved for SD command
    system expansion via the switch command.
    [These commands] will be considered as illegal commands (as
    defined in revision 1.01 of the SD physical layer specification).

The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1.

The 25MB/sec High-Speed mode was already updated in d7ecb867.

The current implementation does not implements CMD34-37, CMD50 and
CMD57, thus these commands already return ILLEGAL.

With this patch, the SCR register now matches the description of the header:

 * SD Memory Card emulation as defined in the "SD Memory Card Physical
 * layer specification, Version 1.10."
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-2-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Message-id: 20180606152128.449-12-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-11-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 20180606152128.449-10-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-9-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-8-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-7-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20180606152128.449-6-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-id: 20180606152128.449-5-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20180606152128.449-4-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-3-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-2-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606191801.6331-1-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It has been marked as deprecated since QEMU v2.11, so it is time to
remove this now. The xlnx-zcu102 machine is very much the same and
can be used as a replacement instead.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is a ethernet wire limitation not needed in emulation. It breaks
U-Boot n/w stack also.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Message-id: 20180530061711.23673-5-clg@kaod.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Based on the multicast hash calculation of the FTGMAC100 Linux driver.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-4-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ftgmac100 NIC supports VLAN tag insertion and the MAC engine also
has a control to remove VLAN tags from received packets.

The VLAN control bits and VLAN tag information are contained in the
second word of the transmit and receive descriptors. The Insert VLAN
bit and the VLAN Tag available bit are only valid in the first segment
of the packet.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-3-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The maximum frame size includes the CRC and depends if a VLAN tag is
inserted or not. Adjust the frame size limit in the transmit handler
using on the FTGMAC100State buffer size and in the receive handler use
the packet protocol.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-2-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pca9552 LED blinkers on the Witherspoon machine are used for leds
but also as GPIOs to control fans and GPUs.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-8-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Specs are available here :

    https://www.nxp.com/docs/en/application-note/AN264.pdf

This is a simple model supporting the basic registers for led and GPIO
mode. The device also supports two blinking rates but not the model
yet.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-7-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Aspeed boards have at least one EEPROM to hold the Vital Product
Data (VPD).
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-6-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is an helper routine to add a single EEPROM on an I2C bus. It can
be directly used by smbus_eeprom_init() which adds a certain number of
EEPROMs on mips and x86 machines.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-5-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The AST2500 EVB does not have an RTC but we can pretend that one is
plugged on the I2C bus header.

The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but
a ds1338 is good enough for the basic features we need.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-4-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Witherspoon boards are OpenPOWER system hosting POWER9 Processors.
Add support for their BMC including a couple of I2C devices as found
on real HW.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 20180530064049.27976-3-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20180530064049.27976-2-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>