- 19 5月, 2017 21 次提交
-
-
由 Stefan Hajnoczi 提交于
ui: egl-headless requires dmabuf support # gpg: Signature made Fri 19 May 2017 09:46:40 AM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-ui-20170519-1: ui: egl-headless requires dmabuf support Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
migration/next for 20170518 # gpg: Signature made Thu 18 May 2017 06:23:26 PM BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20170518: migration: Make savevm.c target independent exec: Create include for target_page_size() migration: migration.h was not needed migration: Remove vmstate.h from migration.h migration: Remove qemu-file.h from vmstate.h migration: Split vmstate-types.c from vmstate.c migration: Move qjson.h to migration/ migration: Remove migration.h from colo.h migration: Export qemu-file-channel.c functions in its own file migration: Split migration/channel.c for channel operations migration: Create migration/xbzrle.h block migration: Allow compile time disable migration: Remove old MigrationParams migration: Remove use of old MigrationParams migration: Create block capability hmp: Use visitor api for hmp_migrate_set_parameter() postcopy: Require RAMBlocks that are whole pages migration: Fix non-multiple of page size migration Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Gerd Hoffmann 提交于
Reported-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170517122744.3541-1-kraxel@redhat.com
-
由 Juan Quintela 提交于
It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export them from exec.h Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
That is the only function that we need from exec.c, and having to include the whole sysemu.h for this. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> --- /me leans to be less sloppy with copyright notices thanks Dave
-
由 Juan Quintela 提交于
This files don't use any function from migration.h, so drop it. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> --- Minor rearrangements due to rebase
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> -- minor rearangements due to the rebase
-
由 Juan Quintela 提交于
Now one just has the interperter, and the other has the basic types. Once there, add copyright boilerplate. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> -- Use GPL v2 or later. Detected by David.
-
由 Juan Quintela 提交于
It is only used for migration code. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
migration.h is not included in any includes now. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
Create an include for its exported functions. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> --- Add proper header
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
Many users now prefer to use drive_mirror over NBD as an alternative to the older migrate -b option; drive_mirror is more complex to setup but gives you more options (e.g. only migrating some of the disks if some of them are shared). Allow the large chunk of block migration code to be compiled out for those who don't use it. Based on a downstream-patch we've had for a while by Jeff Cody. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> -- - When compiled out, allow seting block only with false value (eric)
-
由 Juan Quintela 提交于
Not used anymore after moving block migration to use capabilities. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: NPeter Xu <peterx@redhat.com>
-
由 Juan Quintela 提交于
We have change in the previous patch to use migration capabilities for it. Notice that we continue using the old command line flags from migrate command from the time being. Remove the set_params method as now it is empty. For savevm, one can't do a: savevm -b/-i foo but now one can do: migrate_set_capability block on savevm foo And we can't use block migration. We could disable block capability unconditionally, but it would not be much better. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> --- - Maintain shared/enabled dependency (Xu suggestion) - Now we maintain the dependency on the setter functions - improve error messages
-
由 Juan Quintela 提交于
Create one capability for block migration and one parameter for incremental block migration. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> --- - address all Markus comments - use Markus and Eric text descriptions - change logic another time - improve text messages
-
由 Juan Quintela 提交于
We only use it for int64 at this point, I am not able to find a way to parse an int with MiB units. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
It turns out that it's legal to create a VM with RAMBlocks that aren't a multiple of the pagesize in use; e.g. a 1025M main memory using 2M host pages. That breaks postcopy's atomic placement of pages, so disallow it. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
Unfortunately it's legal to create a VM with a RAM size that's not a multiple of the underlying host page or huge page size. Recently I'd changed things to always send host sized pages, and that breaks if we have say a 1025MB guest on 2MB hugepages. Unfortunately we can't just make that illegal since it would break migration from/to existing oddly configured VMs. Symptom: qemu-system-x86_64: Illegal RAM offset 40100000 as it transmits the fraction of the hugepage after the end of the RAMBlock (may also cause a crash on the source - possibly due to clearing bits after the bitmap) Reported-by: NYumei Huang <yuhuang@redhat.com> Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
- 18 5月, 2017 10 次提交
-
-
由 Stefan Hajnoczi 提交于
HMP pull # gpg: Signature made Wed 17 May 2017 07:03:39 PM BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * dgilbert/tags/pull-hmp-20170517: ramblock: add new hmp command "info ramblock" utils: provide size_to_str() ramblock: add RAMBLOCK_FOREACH() Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
migration/next for 20170517 # gpg: Signature made Wed 17 May 2017 11:46:36 AM BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20170517: migration: Move check_migratable() into qdev.c migration: Move postcopy stuff to postcopy-ram.c migration: Move page_cache.c to migration/ migration: Create migration/blocker.h ram: Rename RAM_SAVE_FLAG_COMPRESS to RAM_SAVE_FLAG_ZERO migration: Pass Error ** argument to {save,load}_vmstate migration: Fix regression with compression threads Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
pci, virtio, vhost: fixes A bunch of fixes that missed the release. Most notably we are reverting shpc back to enabled by default state as guests uses that as an indicator that hotplug is supported (even though it's unused). Unfortunately we can't fix this on the stable branch since that would break migration. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 May 2017 10:42:06 PM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: exec: abstract address_space_do_translate() pci: deassert intx when pci device unrealize virtio: allow broken device to notify guest Revert "hw/pci: disable pci-bridge's shpc by default" acpi-defs: clean up open brace usage ACPI: don't call acpi_pcihp_device_plug_cb on xen iommu: Don't crash if machine is not PC_MACHINE pc: add 2.10 machine type pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot libvhost-user: fix crash when rings aren't ready hw/virtio: fix vhost user fails to startup when MQ hw/arm/virt: generate 64-bit addressable ACPI objects hw/acpi-defs: replace leading X with x_ in FADT field names Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Xu 提交于
This function is an abstraction helper for address_space_translate() and address_space_get_iotlb_entry(). It does the lookup of address into memory region section, then does proper IOMMU translation if necessary. Refactor the two existing functions to use it. This fixes vhost when IOMMU is disabled by guest. Tested-by: NMaxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: NPeter Xu <peterx@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Herongguang (Stephen) 提交于
If a pci device is not reset by VM (by writing into config space) and unplugged by VM, after that when VM reboots, qemu may assert: pcibus_reset: Assertion `bus->irq_count[i] == 0' failed Cc: qemu-stable@nongnu.org Signed-off-by: Nherongguang <herongguang.he@huawei.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Greg Kurz 提交于
According to section 2.1.2 of the virtio-1 specification: "The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET, the device MUST send a device configuration change notification to the driver." Commit "f5ed3663 virtio: stop virtqueue processing if device is broken" introduced a virtio_error() call that just does that: - internally mark the device as broken - set the DEVICE_NEEDS_RESET bit in the status - send a configuration change notification Unfortunately, virtio_notify_vector(), called by virtio_notify_config(), returns right away when the device is marked as broken and the notification isn't sent in this case. The spec doesn't say whether a broken device can send notifications in other situations or not. But since the driver isn't supposed to do anything but to reset the device, it makes sense to keep the check in virtio_notify_config(). Marking the device as broken AFTER the configuration change notification was sent is enough to fix the issue. Signed-off-by: NGreg Kurz <groug@kaod.org> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Marcel Apfelbaum 提交于
This reverts commit dc0ae767. Disabling the shpc controller has an undesired side effect. The PCI bridge remains with no attached devices at boot time, and the guest operating systems do not allocate any resources for it, leaving the bridge unusable. Note that the behaviour is dictated by the pci bridge specification. Revert the commit and leave the shpc controller even if is not actually used by any architecture. Slot 0 remains unusable at boot time. Keep shpc off for QEMU 2.9 machines. Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Xu 提交于
To dump information about ramblocks. It looks like: (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000 vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000 /rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000 pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000 0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000 pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000 0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000 /rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000 /rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000 Ramblock is something hidden internally in QEMU implementation, and this command should only be used by mostly QEMU developers on RAM stuff. It is not a command suitable for QMP interface. So only HMP interface is provided for it. Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: NPeter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Xu 提交于
Moving the algorithm from print_type_size() into size_to_str() so that other component can also leverage it. With that, refactor print_type_size(). The assert() in that logic is removed though, since even UINT64_MAX would not overflow. Signed-off-by: NPeter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Peter Xu 提交于
So that it can simplifies the iterators. Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: NPeter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
- 17 5月, 2017 9 次提交
-
-
由 Stefan Hajnoczi 提交于
x86 and machine queue, 2017-05-17 # gpg: Signature made Wed 17 May 2017 02:37:54 PM BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * ehabkost/tags/x86-and-machine-pull-request: (22 commits) tests: Add [+-]feature and feature=on|off test cases s390-pcibus: No need to set user_creatable=false explicitly xen-sysdev: Remove user_creatable flag virtio-mmio: Remove user_creatable flag sysbus-ohci: Remove user_creatable flag hpet: Remove user_creatable flag generic-sdhci: Remove user_creatable flag esp: Remove user_creatable flag fw_cfg: Remove user_creatable flag unimplemented-device: Remove user_creatable flag isabus-bridge: Remove user_creatable flag allwinner-ahci: Remove user_creatable flag sysbus-ahci: Remove user_creatable flag kvmvapic: Remove user_creatable flag ioapic: Remove user_creatable flag kvmclock: Remove user_creatable flag pflash_cfi01: Remove user_creatable flag fdc: Remove user_creatable flag from sysbus-fdc & SUNW,fdtwo iommu: Remove FIXME comment about user_creatable=true xen-backend: Remove FIXME comment about user_creatable flag ... Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Eduardo Habkost 提交于
Add test code to ensure features are enabled/disabled correctly in the command-line. The test case use the "feature-words" and "filtered-features" properties to check if the features were enabled/disabled correctly. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170508183205.10884-1-ehabkost@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
TYPE_S390_PCI_HOST_BRIDGE is a subclass of TYPE_PCI_HOST_BRIDGE, which is a subclass of TYPE_SYS_BUS_DEVICE. TYPE_SYS_BUS_DEVICE already sets user_creatable=false, so we don't require an explicit user_creatable=false assignment in s390_pcihost_class_init(). Cc: Alexander Graf <agraf@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Frank Blaschka <frank.blaschka@de.ibm.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Pierre Morel <pmorel@linux.vnet.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Huth <thuth@redhat.com> Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-22-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
TYPE_XENSYSDEV is only used internally by xen_be_init(), and is not supposed to be plugged/unplugged dynamically. Remove the user_creatable flag from the device class. Cc: Juergen Gross <jgross@suse.com>, Cc: Peter Maydell <peter.maydell@linaro.org>, Cc: Thomas Huth <thuth@redhat.com> Cc: sstabellini@kernel.org Cc: Markus Armbruster <armbru@redhat.com>, Cc: Marcel Apfelbaum <marcel@redhat.com>, Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: NJuergen Gross <jgross@suse.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-21-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
virtio-mmio needs to be wired and mapped by other device or board code, and won't work with -device. Remove the user_creatable flag from the device class. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-20-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
sysbus-ohci needs to be mapped and wired by device or board code, and won't work with -device. Remove the user_creatable flag from the device class. Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-19-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
hpet needs to be mapped and wired by the board code and won't work with -device. Remove the user_creatable flag from the device class. Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-18-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
generic-sdhci needs to be wired by other devices' code, so it can't be used with -device. Remove the user_creatable flag from the device class. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Prasad J Pandit <pjp@fedoraproject.org> Cc: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-17-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
esp devices aren't going to work with -device, as they need IRQs to be connected and mmio to be mapped (this is done by esp_init()). Remove the user_creatable flag from the device class. Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-16-ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-