This bug existed since the first commit. Fortunately, the affected
registers have no functionality in qemu. This will only prevent the
following warning:
  milkymist_vgafb: write access to unknown register 0x00000034
Signed-off-by: NMichael Walle <michael@walle.cc>

Because binutils disassembler is based on libopcode, this is a rewrite from
scratch.
Signed-off-by: NMichael Walle <michael@walle.cc>

The new version introduces the following new registers:
 - SoC clock frequency: read-only of system clock used on the SoC
 - debug scratchpad: 8 bit scratchpad register
 - debug write lock: write once register, without any function on QEMU
Signed-off-by: NMichael Walle <michael@walle.cc>

Once qtest support for target-lm32 arrives, tcg may be disabled.
Signed-off-by: NMichael Walle <michael@walle.cc>

Signed-off-by: NMichael Walle <michael@walle.cc>

* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  pl031: switch clock base to rtc_clock
  pl031: rearm alarm timer upon load
  arm: switch real-time clocks to rtc_clock
  omap: switch omap_lpg to vm_clock
  rtc: add -rtc clock=rt

* 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpu:
  target-unicore32: Move CPU-dependent init into initfn
  target-unicore32: QOM'ify CPU
  target-unicore32: License future contributions under GPLv2+
  target-unicore32: Relicense to GPLv2+
  MAINTAINERS: Add entry for UniCore32

* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  ARM: Permit any ARMv6K CPU to read the MVFR0 and MVFR1 VFP registers.
  target-arm: Minimalistic CPU QOM'ification
  target-arm: Drop cpu_arm_close()

Older pod2man don't have a --utf8 switch, check for this in conffigure
and use it only when present.  Fixes build on RHEL-5.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Some locale settings let make fail or create wrong results
because tr '[:lower:]' '[:upper:]' which is used to convert
from lower to upper case depends on the locale.

With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'.
This results in wrong entries in config-host.h like these ones:

  #define CONFIG_QEMU_PREFiX "/usr/local"
  #define CONFIG_QEMU_BiNDiR "/usr/local/bin"

This problem was reported by Emre Ersin.

The same problem occurs when configure creates the target specific
files config-target.mak. They get wrong declarations:

TARGET_CRiS=y
TARGET_i386=y
TARGET_MiCROBLAZE=y
TARGET_MiPS64=y
TARGET_MiPS=y
TARGET_UNiCORE32=y

It is sufficient to restrict the conversion to the characters a-z.

Using this explicit range avoids the dependency on the locale
settings and is also shorter.

v2:
POSIX says that 'tr a-z' is unspecified outside of the POSIX
locale, so we must set LC_ALL=C to make sure that we are using
POSIX (hint from Eric Blake, thanks).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid this warning on OpenBSD:
  CC    tests/rtc-test.o
/src/qemu/tests/rtc-test.c: In function 'check_time':
/src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
/src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t'
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

time_t appears to be an unsigned long so use %ld.
Reported-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Trace objects are also needed if tracing is enabled.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch combines qtest and -icount together to turn the vm_clock
into a source that can be fully managed by the client.  To this end new
commands clock_step and clock_set are added.  Hooking them with libqtest
is left as an exercise to the reader.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since /i440fx/piix3 is being removed from the composition tree, the
IO-APIC is placed under /i440fx.  This is wrong and should be changed
as soon as the /i440fx/piix3 path is put back.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The idea behind qtest is pretty simple.  Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.

qtest presents itself as an accelerator.  In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device.  This is what
allows the external process to send CPU events to the device model.

qtest uses a simple line based protocol to send the events.  Documentation of
that protocol is in qtest.c.

I considered reusing the monitor for this job.  Adding interrupts would be a bit
difficult.  In addition, logging would also be difficult.

qtest has extensive logging support.  All protocol commands are logged with
time stamps using a new command line option (-qtest-log).  Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This introduces new test reporting infrastructure based on
gtester and gtester-report.

Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: NAnthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This lets the user specify the desired semantics.  By default, the RTC
will follow adjustments from the host's NTP client, and will remain in
sync when the virtual machine is stopped.  The previous behavior, which
provides determinism with both icount and qtest, remains available with
"-rtc clock=vm".

pl031 supports migration, so we need to convert the time base from
rtc_clock to vm_clock and back for backwards compatibility.  (The
rtc_clock may not be synchronized on the two machines, especially with
savevm/loadvm, so the conversion is needed anyway.  And since any time
base will do, why not pick the one base that is backwards compatible).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This lets the user specify the desired semantics.  By default, the RTC
will follow adjustments from the host's NTP client.  "-rtc clock=vm" will
improve determinism with both icount and qtest.  Finally, the previous
behavior is available with "-rtc clock=rt".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The output of the pulse generator needs to be deterministic when
running in -icount mode, and to remain constant whenever the VM is
stopped.  So the right clock to use is vm_clock.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This will let people use backwards-compatible semantics for devices that
will be affected by the following patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch replaces the ARM_FEATURE_VFP3 test when reading MVFR registers
with a test for a new feature flag ARM_FEATURE_MVFR, and sets this feature
for all ARMv6K cores (ARM1156 is not a v6K core, yet supports MVFR; qemu
does not support ARM1156 at this time.)

MVFR0 and MVFR1 were introduced in ARM1136JF-S r1p0 (ARMv6K, VFPv2) and are
present in ARM1156T2F-S (non-v6K), ARM1176JZF-S, ARM11MPCore and newer cores.
Reference: ARM DDI 0211H, 0290G, 0301H, 0360E.
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0211h/Ffbefjag.html

Without this change, the linux kernel will not boot with VFP support enabled
under ARM1176 system emulation, due to the unconditional use of MVFR1 at the
end of vfp_init() in arch/arm/vfp/vfpmodule.c:

  VFP support v0.3: implemetor 41 architecture 1 part 20 variant b rev 5
  Internal error: Oops - undefined instruction: 0 [#1]
Signed-off-by: NAndrew Towers <atowers@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Instead of setting values in a CPUID switch, do so in initfn functions.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>

Embed CPUUniCore32State as first member of UniCore32CPU.

Contributed under GPLv2+.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>

This is to limit relicensing obstacles to the pending IBM investigation.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>

Adopt the license text suggested by Guan Xue-tao (with a minor
simplification) for all target-unicore/ files except helper.c.

To helper.c Anthony Liguori contributed a qemu_malloc() -> g_malloc()
conversion, still pending IBM relicensing approval, so that remains
GPLv2 for now.

By relicensing all possible parts now, we avoid having to formally
relicense new, e.g., QOM code.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NDor Laor <dlaor@redhat.com>

Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>

* origin/master:
  qemu tcg: Remove one entry of INDEX_op_ld_i64 from ppc_op_defs

Introduce only one non-abstract type TYPE_ARM_CPU and do not touch
cp15 registers to not interfere with Peter's ongoing remodelling.
Embed CPUARMState as first (additional) field of ARMCPU.

Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's unused, so no need to QOM'ify it later.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There two entries of INDEX_op_ld_i64 in the ppc_op_defs.  That causes an
assertion failure in tcg_add_target_add_op_defs() when --enable-debug is
used on a ppc64 backend (that's ppc64 host, not target).
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nmalc <av1474@comtv.ru>

* sstabellini/disk_io:
  xen_disk: when using AIO flush after the operation is completed
  xen_disk: open disk with BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NATIVE_AIO

* sstabellini/xen-fixes:
  xen_disk: detach the blkdev before bdrv_delete
  xen_console: ignore console disconnect events from console/0

* qmp/queue/qmp:
  qmp: document strict parsing
  qmp: parse commands in strict mode
  qmp: add and use q type specifier
  qapi: add strict mode to input visitor
  qapi: place outermost object on qiv stack
  qapi: untangle next_list
  qapi: allow freeing partially-allocated objects
  qapi: shortcut visits on errors
  qapi: fix memory leak on error
  qapi: fail hard on stack imbalance
  qapi: add a test case for type errors
  qapi: add struct-errors test case to test-qmp-output-visitor
  qapi: fix double free in qmp_output_visitor_cleanup()

* alon/libcacard:
  libcacard/vcard_emul_nss: add warning for old coolkey
  libcacard/vcard_emul_nss: handle no readers at startup
  libcacard/vcard_emul_nss: don't stop thread when there are no slots

Mask incoming page address early so that resolved addresses
are page aligned. Remove further address masking.
Tested-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>