Parse the descriptor flags that segment registers refer to and show the
result in a more human-friendly format. The output of info registers eg.
then looks like this:

[...]
ES =007b 00000000 ffffffff 00cff300 DPL=3 DS   [-WA]
CS =0060 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0068 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =007b 00000000 ffffffff 00cff300 DPL=3 DS   [-WA]
FS =0000 00000000 00000000 00000000
GS =0033 b7dd66c0 ffffffff b7dff3dd DPL=3 DS   [-WA]
LDT=0000 00000000 00000000 00008200 DPL=0 LDT
TR =0080 c06da700 0000206b 00008900 DPL=0 TSS32-avl
[...]

Changes in this version:
 - refactoring so that only a single helper is used for dumping the
   segment descriptor cache
 - tiny typo fixed that broke 64-bit segment type names
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7179 c046a42c-6fe2-441c-8c8c-71466251a162

Fix two stupid bugs that I forgot to push out:


 - qiov->size already is in bytes, no need to shift it
 - actually use the supplied patter in the writev command
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7178 c046a42c-6fe2-441c-8c8c-71466251a162

attached patch makes qemu use install consistently.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7177 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7175 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162

Replicate ACPI irq0->inti2 override in mp table for non-acpi case.

v1 -> v2 adds comment suggested by Ryan.
Signed-off-by: NBeth Kon <eak@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7169 c046a42c-6fe2-441c-8c8c-71466251a162

While Intel's spec is not that clear here, latest changes to Linux' HPET
code (commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403, "x86: hpet: stop
HPET_COUNTER when programming periodic mode") strongly suggest that
HPET_TN_SETVAL rather means: Set _both_ the comparator value and
register.

With this patch applied, I'm again able to boot 2.6.30-rc kernels as
they no longer panic like this (which was due to the comparator
register remaining 0):

ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work! [...]
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7168 c046a42c-6fe2-441c-8c8c-71466251a162

Fix (more or less) spurious guest boot failures due to corrupted cpuid
states. The reason was insufficient initialization of cpuid entries
before passing them to the kernel.

At this chance also fix improper entry pointer progression and simplify
the code a bit.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7167 c046a42c-6fe2-441c-8c8c-71466251a162

This patch fixes a qcow2 corruption bug introduced in SVN Rev 5861. L2 tables
are big endian, so entries must be converted before being passed to functions.

This bug is easy to trigger. The following script will create and destroy a
qcow2 image (the header is gone after three loop iterations):

    #!/bin/bash
    qemu-img create -f qcow2 test.qcow 1M
    for i in $(seq 1 10); do
    qemu-system-x86_64 -hda test.qcow -monitor stdio > /dev/null 2>&1 <<EOF
    savevm test-$i
    quit
    EOF
    done
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7165 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7164 c046a42c-6fe2-441c-8c8c-71466251a162

Create a new -smbios option (x86-only) to allow binary SMBIOS entries
to be passed through to the BIOS or modify the default values of
individual fields of type 0 and 1 entries on the command line.

Binary SMBIOS entries can be generated as follows:

dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \
        perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin

These can then be passed to the BIOS using this switch:

 -smbios file=smbios_type_1.bin

Command line generation supports the following syntax:

 -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
 -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
              [,uuid=$(uuidgen)][,sku=str][,family=str]

For instance, to add a serial number to the type 1 table:

 -smbios type=1,serial=0123456789

Interface is extensible to support more fields/tables as needed.

aliguori: remove texi formatting from help output
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7163 c046a42c-6fe2-441c-8c8c-71466251a162

SMBIOS parameters can also provide a UUID outside of vl.c.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7162 c046a42c-6fe2-441c-8c8c-71466251a162

It's allocated using qemu_mallocz(), so ...

The name and model strings are strdup() allocated, so free()
is still appropriate for them.
Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7151 c046a42c-6fe2-441c-8c8c-71466251a162

We're currently leaking memory and file descriptors on device
hot-unplug.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162

NICInfo::model will always be identical to the device name strings
we're currently passing to nic_init(). Just re-use NICInfo::model.

This makes it clear why we use vc->model for unregister_savevm()
in a subsequent patch.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7149 c046a42c-6fe2-441c-8c8c-71466251a162

Currently there's no way to unregister a savevm callback, so
e.g. if a NIC is hot-unplugged and a savevm is issued, we'll
segfault.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7148 c046a42c-6fe2-441c-8c8c-71466251a162

NICInfo isn't used after initialization, so remove it from the driver
state structures.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7147 c046a42c-6fe2-441c-8c8c-71466251a162

Now that we abort() on malloc, neither qemu_find_vlan() nor
net_tap_fd_init() can fail.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7146 c046a42c-6fe2-441c-8c8c-71466251a162

It's perfectly fine to not supply a NIC model when adding
a new NIC - we supply the default model to pci_nic_init()
and it uses that if one wasn't explicitly supplied.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7145 c046a42c-6fe2-441c-8c8c-71466251a162

We weren't freeing the name string everywhere.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7144 c046a42c-6fe2-441c-8c8c-71466251a162

struct iovec is now defined in qemu-common.h if needed, so we don't need
the tap code to handle !defined(HAVE_IOVEC).
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7143 c046a42c-6fe2-441c-8c8c-71466251a162

Obviously merged from kvm-userspace accidentally.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7142 c046a42c-6fe2-441c-8c8c-71466251a162

In theory, there are no more quirks in the KVM slot management that
requires dirty log start/stop all over the place. We just have to start
the logging each time the mapping may have changed. This patch drops
vga_dirty_log_stop for both standard and cirrus VGA. It also reverts
#6851 as it was obviously a tribute to the old slot system.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7141 c046a42c-6fe2-441c-8c8c-71466251a162

Only track video RAM mapping in map_addr and use the correct RAM size.
Furthermore, make sure the reset the address in case unmapping took
place via PCI reconfiguration.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7140 c046a42c-6fe2-441c-8c8c-71466251a162

This reworks the slot management to handle more patterns of
cpu_register_physical_memory*, finally allowing to reset KVM guests (so
far address remapping on reset broke the slot management).

We could actually handle all possible ones without failing, but a KVM
kernel bug in older versions would force us to track all previous
fragmentations and maintain them (as that bug prevents registering
larger slots that overlap also deleted ones). To remain backward
compatible but avoid overly complicated workarounds, we apply a simpler
workaround that covers all currently used patterns.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7139 c046a42c-6fe2-441c-8c8c-71466251a162

Fail loudly if we run out of memory slot.

Make sure that dirty log start/stop works with consistent memory regions
by reporting invalid parameters. This reveals several inconsistencies in
the vga code, patch to fix them follows later in this series.

And, for simplicity reasons, also catch and report unaligned memory
regions passed to kvm_set_phys_mem (KVM works on page basis).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7138 c046a42c-6fe2-441c-8c8c-71466251a162

Testing for TLB_MMIO on unmap makes no sense as A) that flag belongs to
CPUTLBEntry and not to io_memory slots or physical addresses and B) we
already use a different condition before mapping. So make this test
consistent.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7137 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7136 c046a42c-6fe2-441c-8c8c-71466251a162

Make sure KVM gets informed about the reset CPU state.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7135 c046a42c-6fe2-441c-8c8c-71466251a162

Configure test was broken, so the breakage of the #ifdef'd
code was not noticed.
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7134 c046a42c-6fe2-441c-8c8c-71466251a162

This reverts commit r7127, r7132 is a better fix for that.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7133 c046a42c-6fe2-441c-8c8c-71466251a162

There is no need to exit the tb after a call to helper_raise_exception
as it already calls cpu_loop_exit().
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7132 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7131 c046a42c-6fe2-441c-8c8c-71466251a162

The patch called "prefer glibc over direct syscalls" (commit 7118) has
replaced the getcwd syscall with a call to the glibc. With this change,
the syscall is returning -1 in error case and 0 otherwise.
This is problematic as the sys_getcwd syscall should return the number
of bytes written to the buffer including the '\0'.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Acked-By: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7130 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7129 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7128 c046a42c-6fe2-441c-8c8c-71466251a162

check_*() functions may in fine call generate_exception(), which ends
by a call to tcg_gen_exit_tb(). As a consequence, we have to make sure
that no TCG temp variables are crossing a check_*() function.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7127 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7126 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7125 c046a42c-6fe2-441c-8c8c-71466251a162