This remove the init, exit functions as they are no longer used.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This add two functions:
   * virtio_bus_set_vdev_config.
   * virtio_bus_set_vdev_feature.

Needed by virtio-ccw.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As the virtio-rng-pci, virtio-rng-s390 and virtio-rng-ccw are
switched to the new API, we can use QOM casts.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The qdev field is no longer needed, just drop it.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This remove old init and exit function as they are no longer needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-rng-s390 is modified for the new API. The device
virtio-rng-s390 extends virtio-s390-device as before. It creates and
connects a virtio-rng during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-rng-pci is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.

The virtio_pci_reset function, is removed as no longer used.
The virtio_pci_rst function, is renamed virtio_pci_reset.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create virtio-rng-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The configuration field must not be a pointer as it will be used for
virtio-rng properties. So *conf is replaced by conf.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a linked list of keyboard handlers.  Added handlers will go
to the head of the list.  Removed handlers will be zapped from
the list.  The head of the list will be used for events.

This fixes the keyboard-dead-after-usb-kbd-unplug issue, key events
will be re-routed to the ps/2 kbd instead of being discarded.

[ v2: fix cut+paste bug found my Markus ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1366798118-3248-3-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366799842-18550-1-git-send-email-hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move the TPM passthrough specific command line options to the passthrough
backend implementation and attach them to the backend's interface structure.

Add code to tpm.c for validating the TPM command line options.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryan <coreyb@linux.vnet.ibm.com>
Message-id: 1366641699-21420-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As the virtio-9p-pci is switched to the new API, we can use QOM casts.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This remove old init function as it is no longer needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-9p-pci is modified for the new API. The device
virtio-9p-pci extends virtio-pci. It creates and connects a
virtio-9p-device during the init. The properties are not changed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create virtio-9p-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allows to remove one FIXME.  Makes LIBUSB_LOG_LEVEL_WARNING build errors
go away.  And starting with that version libusb has a LIBUSBX_API_VERSION
define which allows to easily #ifdef version dependencies should that
need arrive in the future.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint.  And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.

There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:

1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.

2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.

Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.

Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.

Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Simplify the creation of the cancel path given the TPM's device path.
Given the path /dev/tpm0 build the path /sys/class/misc/tpm0/device/cancel.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1366146516-23814-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAsias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NAsias He <asias@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line.  Instead, I hardcode it to zero.

Changes in Patch-v2:
   - Add vhost_scsi_get_features() in order to determine feature bits
     supports by host kernel (mst + nab)
   - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
     EVENT_IDX to be disabled by host in vhost_scsi_get_features()
   - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES

Changes in Patch-v1:
   - Set event_idx=off by default (nab, thanks asias)
   - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
     re-enable in v3.10 (nab)
   - Update to latest qemu.git/master HEAD

Changes in WIP-V3:
   - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
   - Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
   - Add hotplug feature bit

Changes in WIP-V2:
   - Add backend guest masking support (nab)
   - Bump ABI_VERSION to 1 (nab)
   - Set up set_guest_notifiers (asias)
   - Set up vs->dev.vq_index (asias)
   - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
   - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)

Howto:
   Use the latest seabios, at least commit b44a7be17b
   git clone git://git.seabios.org/seabios.git
   make
   cp out/bios.bin /usr/share/qemu/bios.bin
   qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NAsias He <asias@redhat.com>
[ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature
  negotiation and irqfd masking - Paolo ]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Because dev->actual is uint32_t, the expression 'dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT' is truncated to 32 bits. This overflows when
dev->actual >= 1048576.

To reproduce:

 1. Start a VM with a QMP socket and 5G of RAM
 2. Connect to the QMP socket, negotiate capabilities and issue:

   { "execute":"balloon", "arguments": { "value": 1073741824 } }

 3. Watch for BALLOON_CHANGE QMP events, the last one will incorretly be:

   { "timestamp": { "seconds": 1366228965, "microseconds": 245466 },
     "event": "BALLOON_CHANGE", "data": { "actual": 5368709120 } }

To fix it this commit casts it to ram_addr_t, which is ram_size's type.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Drop the vpb_pci_config_addr() function -- it is unnecessary since
the size of the memory regions means the hwaddr is always within
the 24 bit size. (This function was probably a leftover from when
read/write functions were called with absolute addresses rather
than relative ones.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).

The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Implement the correct IRQ mapping for the Versatile PCI controller; it
differs between realview and versatile boards, but the previous QEMU
implementation was correct only for the first PCI card on a versatile
board, since we weren't swizzling IRQs based on the slot number.

Since this change would otherwise break any uses of PCI on Linux kernels
which have an equivalent bug (since they have effectively only been
tested against QEMU, not real hardware), we implement a mechanism
for automatically detecting those broken kernels and switching back
to the old mapping. This works by looking at the values the kernel
writes to the PCI_INTERRUPT_LINE register in the config space, which
is effectively the interrupt number the kernel expects the device
to be using.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On real hardware the host bridge appears as a PCI device in slot 29,
so make QEMU put its host bridge in that slot too.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Rather than overloading the system I/O space (which doesn't even make
any sense on ARM) for PCI I/O, create an memory region in the PCI
controller and use that to represent the I/O space.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>

Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally
handle PCI in a more QOM-like fashion.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaul Brook <paul@codesourcery.com>