Now that the function uses a vector instead of a buffer, there is no
need to use recursive code.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Added implementation of the qcow2_co_pwritev_compressed function that
will allow us to safely use compressed writes for the qcow2 from running
VMs.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For bdrv_pwrite_compressed() it looks like most of the code creating
coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag
(BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one.
In the end we get coroutine oriented function for write compressed by using
bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is a preparatory patch, which continues the general trend of the
transition to the byte-based interfaces. bdrv_check_request() and
blk_check_request() are no longer used, thus we can remove them.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is no reason why an NBD server couldn't be started for any node,
even if it's not on the top level. This converts nbd-server-add to
accept a node-name.

Note that there is a semantic difference between using a BlockBackend
name and the node name of its root: In the former case, the NBD server
is closed on eject; in the latter case, the NBD server doesn't drop its
reference and keeps the image file open this way.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

The builtin NBD server uses its own BlockBackend now instead of reusing
the monitor/guest device one.

This means that it has its own writethrough setting now. The builtin
NBD server always uses writeback caching now regardless of whether the
guest device has WCE enabled. qemu-nbd respects the cache mode given on
the command line.

We still need to keep a reference to the monitor BB because we put an
eject notifier on it, but we don't use it for any I/O.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-mirror to accept a node-name without lifting the restriction that
we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
change-backing-file to accept a node-name without lifting the
restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-internal-sync to accept a node-name without lifting
the restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-delete-internal-sync to accept a node-name without
lifting the restriction that we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-mirror to accept a node-name without lifting the restriction
that we're operating at a root node.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-commit to accept a node-name without lifting the restriction that
we're operating at a root node.

As libvirt makes use of the DeviceNotFound error class, we must add
explicit code to retain this behaviour because qmp_get_root_bs() only
returns GenericErrors.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-stream to accept a node-name without lifting the restriction that
we're operating at a root node.

In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

This allows the creation of an empty scsi-cd device without manually
creating a BlockBackend.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This allows the creation of an empty ide-cd device without manually
creating a BlockBackend.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The 9P spec at http://man.cat-v.org/plan_9/5/intro says:

All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot).  The parent of the root directory of a server's
tree is itself.

This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".

This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
  QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:

The names . and .. are special; it is illegal to create files with these
names.

This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".

Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:

    - mknod
    - rename
    - renameat
    - mkdir
    - link
    - symlink

The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).

The various error values come from the linux manual pages.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.

Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.

Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".

This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.

If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.

[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/introSuggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* pc-bios/optionrom/Makefile fix for -O0
* revert socket_connect change

# gpg: Signature made Tue 30 Aug 2016 15:36:59 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  optionrom: cope with multiple -O options
  Revert "Change net/socket.c to use socket_*() functions"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reproducer:

    CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs

Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0"
and pc-bios/optionrom/Makefile forgets to add the -O2 it needs.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since commit 7e844959, the socket connect code is blocking, because
calling socket_connect() without callback is blocking.  This reverts the
commit.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tb_flush does all kind of things, which are very tcg specific. As it
is called from some places even for KVM (e.g. gdb server) it is better
to detect these cases and do an early exit.
This also fixes a crash in the gdb server that was triggered by
commit 909eaac9 ("tb hash: track translated blocks with qht").
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reported-by: NRichard Henderson <rth@twiddle.net>
Reported-by: NBrent Baccala <cosine@freesoft.org>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In previous commit

  commit c7628bff
  Author: Gerd Hoffmann <kraxel@redhat.com>
  Date:   Fri Oct 30 12:10:09 2015 +0100

    vnc: only alloc server surface with clients connected

the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.

Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.

The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.

To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Tested-by: NPeter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio: fixes

some bugfixes for virtio
balloon is still broken wrt migration
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 23 Aug 2016 17:33:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  virtio: decrement vq->inuse in virtqueue_discard()
  virtio: recalculate vq->inuse after migration
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Must include "qemu-version.h" for the QEMU_PKGVERSION definition.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again.  It's necessary to decrement vq->inuse to avoid "leaking"
the element count.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The vq->inuse field is not migrated.  Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.

At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements.  For these devices we need to recalculate
vq->inuse upon load so the value is correct.

Cc: qemu-stable@nongnu.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  e1000e: remove internal interrupt flag
  slirp: fix segv when init failed
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.

CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NDmitry Fleytman <dmitry@daynix.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Since commit f6c2e66a, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:

==18447== Invalid write of size 8
==18447==    at 0x7EF2B5: notifier_remove (notify.c:32)
==18447==    by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447==    by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447==    by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447==    by 0x69445B: qemu_del_net_client (net.c:401)
==18447==    by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447==    by 0x6A4241: net_init_slirp (slirp.c:865)
==18447==    by 0x695C6D: net_client_init1 (net.c:1051)
==18447==    by 0x695F6E: net_client_init (net.c:1108)
==18447==    by 0x696DBA: net_init_netdev (net.c:1498)
==18447==    by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447==    by 0x696E60: net_init_clients (net.c:1516)
==18447==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Since f6880b7f [qemu-log: support simple pid substitution for logs],
test-logging creates files with hard-coded names in /tmp. In the best
case, this prevents multiple developers from running "make check" on
the same machine. In the worst case, it allows for symlink attacks,
enabling an attacker to overwrite files that are writable to the
developer running "make check".

Instead of hard-coding the paths, create a temporary directory using
g_dir_make_tmp() and clean it up afterwards.

Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs")
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.

May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
 when C++ files include glib-compat.h]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In 9c371467 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>