- 17 7月, 2009 27 次提交
-
-
由 Gerd Hoffmann 提交于
Add vectors property, allowing to turn off msi by setting vectors=0. Add compat property to pc-0.10 disabling msi. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add class property to virtio-console-pci allowing to specify the PCI class. Add compat property to pc-0.10 to set the old PCI class. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add class property to virtio-blk-pci allowing to specify the PCI class. Add compat property to pc-0.10 to set the old PCI class. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add id field to DeviceState. Make "info qtree" print it. This helps users and management apps identifying devices in monitor output, which is especially useful with otherwise identical devices such as two virtio disks. This patch doesn't add a way to set the id, followup patches will do. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
no_user: prevent users from adding certain devices. desc: description of the device. alias: to allow user friendly shortcuts on the command line, i.e. -device usbmouse instead of -device "QEMU USB Mouse" or -device lsi instead of -device lsi53c895a Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This add support for switching devices into a compatibility mode using device properties. Machine types can have a list of properties for specific devices attached to allow the easy creation of machine types compatible to older qemu versions. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Useful for testing hardware emulations or manipulating its state to stress guest drivers. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Dinesh Subhraveti 提交于
Currently only common PS2 state is initialized, leaving keyboard and mouse specific state to contain stale values. Signed-off-by: Dinesh Subhraveti <dineshs@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Glauber Costa 提交于
Hi, Whoever wrote this migrate_set_speed function is totally stupid. Any failed or completed migration keeps its state to allow probing of migration data, but has no associated file anymore. It is, thus, possible to crash qemu by calling migrate_set_speed after a migration is finished (or failed, or cancelled), but before another one starts. This patch fixes it. Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stuart Brady 提交于
This patch removes dead i386 assembly code from softmmu_header.h. The code is conditional on ASM_SOFTMMU, which is never defined. Optimisation for the fast path is already handled by tcg_out_qemu_ld() and tcg_out_qemu_st(), so there seems to be little need for this code. Signed-off-by: NStuart Brady <stuart.brady@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
Instead of doing our own check for protocols which fails because raw isn't formally a protocol but special cased in find_protocol specify the BDRV_O_FILE option to use the same code as bdrv_file_open does. While we're at it also add the missing documentation for -g to the main qemu-io help string. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Igor Kovalenko 提交于
Use static empty variable s_cputlb_empty_entry to clear entries, also reset addend member when clearing entries. This helps running with valgrind/memcheck Signed-off-by: igor.v.kovalenko@gmail.com -- Kind regards, Igor V. Kovalenko Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Beth Kon 提交于
Without this, after system reset, hpet does not detect transition from non-legacy to legacy mode. Signed-off-by: NBeth Kon <eak@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
The load_vmstate and save_vmstate functions are implemented as a variation of the normal read/write operation, enabled by the -b option. This is the same mechanism as is used to switch from read/write to pread/pwrite. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Pascal Terjan 提交于
Here is a patch I had sent twice to the list 2 years ago. Hopefuly this time someone will be interested It adds support for passing vga mode to linux kernel through vga= option in -append Signed-off-by: NPascal Terjan <pterjan@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
Using int for cpu_{in, out}[bwl] is inconsistent with other part because for address or value, uintN_t is used by other qemu part. At least, softmmu, CPU{Read, Write}MemoryFunc, pci, target_phys_addr_t and the callers of cpu_{in, out}[bwl](). This patch removes the inconsistency. IO port has its own address space so define pio_addr_t as uint32_t because PCI io space width is 32bit. And use uint{32, 16, 8}_t for ioport value. Changing signedness of value might cause subtle issue. However only a suspicious caller is kvm_handle_io() which is ok. And other callers pass unsigned value in the first place. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Cc: Stuart Brady <sdbrady@ntlworld.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Samuel Thibault <samuel.thibault@gnu.org> Cc: Tristan Gingold <gingold@adacore.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
remove some #ifdef DEBUG_UNUSED_IOPORT in ioport.c and use PRIx32 where appropriate Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
In qemu-iotests, some large images are created using qemu-img. Without checks for errors, qemu-img will just create an empty image, and later read / write tests will fail. With the patch, failures during image creation are detected and reported. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andre Przywara 提交于
Since we recently do not disable 3DNOW! support anymore, we should avoid setting the bits in the default qemu64 CPU model to ease migration. TCG does not support it anyway and even AMD deprecates it's usage nowadays. If you want to use it in KVM, use the phenom, athlon or host CPU model. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
-S is not honored by qemu on incoming migration. If a domain is migrated while paused, thus, it will start running on the remote machine; this is wrong. Given the trivial patch to fix this, it looks more like a thinko than anything else, probably dating back to the qemu-kvm merge. The interesting part is that the -S mechanism was in fact *used* when migrating (setting autostart = 0) and the incoming migration code was starting the VM at the end of the migration. Since I was removing the vm_start from there, I also corrected a related imprecision. The code was doing a vm_stop "just in case", but we can be sure that the VM is not running---the vm_start call in vl.c has not been reached yet. So the vm_stop is removed together with the vm_start. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 16 7月, 2009 13 次提交
-
-
由 Blue Swirl 提交于
Also increase QDEV_MAX_IRQ. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Anthony Liguori 提交于
That dirties the working directory of the tree. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This combination of ld/object was suggested by Bartlomiej Celary Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
v1 -> v2 adds comment suggested by Ryan. v2 -> v3 clarifies comment and corrects entry count Signed-off-by: NBeth Kon <eak@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
remove unnecessary #ifdef DEBUG_PCI. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
The VM state offset is a concept internal to the image format. Replace the old bdrv_{get,put}_buffer method that require an index into the image file that is constructed from the VM state offset and an offset into the vmstate with the bdrv_{load,save}_vmstate that just take an offset into the VM state. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
We're marking the used entry bitmap in smbios_load_external() for each type we check, regardless of whether we loaded anything. This makes subsequent calls behave as if we've already loaded the tables from qemu and can result in missing tables (ex. multiple type4 entries on an SMP guest). Only mark the bitmap if we actually load something. Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-