Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

migration_put_buffer is never called if there has been an error.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We will go around the loop exactly once after setting last_round.
Eliminate the variable altogether.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is consistent once that we have moved everything to migration.c
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Buffering was needed because blocking writes could take a long time
and starve other threads seeking to grab the big QEMU mutex.

Now that all writes (except within _complete callbacks) are done
outside the big QEMU mutex, we do not need buffering at all.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Only the migration_bitmap_sync() call needs the iothread lock.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This makes it possible to do blocking writes directly to the socket,
with no buffer in the middle.  For RAM, only the migration_bitmap_sync()
call needs the iothread lock.  For block migration, it is needed by
the block layer (including bdrv_drain_all and dirty bitmap access),
but because some code is shared between iterate and complete, all of
mig_save_device_dirty is run with the lock taken.

In the savevm case, the iterate callback runs within the big lock.
This is annoying because it complicates the rules.  Luckily we do not
need to do anything about it: the RAM iterate callback does not need
the iothread lock, and block migration never runs during savevm.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This groups together the callbacks that later will have similar
locking rules.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Some state is shared between the block migration code and its AIO
callbacks.  Once block migration will run outside the iothread,
the block migration code and the AIO callbacks will be able to
run concurrently.  Protect the critical sections with a separate
lock.  Do the same for completed_sectors, which can be used from
the monitor.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Some small changes that will simplify the positioning of lock/unlock
primitives.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Perform final cleanup in a bottom half, and add joining the thread to
the series of cleanup actions.

migrate_fd_error remains for connection error, but it doesn't need
to cleanup anything anymore.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Accessing s->state outside the big QEMU lock will simplify a bit the
locking/unlocking of the iothread lock.

We need to keep the lock in migrate_fd_error and migrate_fd_completed,
however, because they call migrate_fd_cleanup.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NKazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Completion of migration is currently done with a "nested" loop that
invokes buffered_flush: migrate_fd_completed is called by
buffered_file_thread, which calls migrate_fd_cleanup, which calls
buffered_close (via qemu_fclose), which flushes the buffer.

Simplify this, by reusing the buffered_flush call of buffered_file_thread.
Then if qemu_savevm_state_complete was called, and the buffer is empty
(including the QEMUFile buffer, for which we need the previous patch), we
are done.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Always use qemu_file_get_error to detect errors, since that is how
QEMUFile itself drops I/O after an error occurs.  There is no need
to propagate and check return values all the time.

Also remove the "complete" member, since we know that it is set (via
migrate_fd_cleanup) only when the state changes.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Remove the return value of buffered_flush, pass it via the error code
of s->file.  Once this is done, the error can be retrieved simply
via migrate_fd_close's call to qemu_fclose.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Including data that resided in the QEMUFile's own buffer.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Right now, migration cannot entirely rely on QEMUFile's automatic
drop of I/O after an error, because it does its "real" I/O outside
the put_buffer callback.  To fix this until buffering is gone, expose
qemu_file_set_error which we will use in buffered_flush.

Similarly, buffered_flush is not a complete flush because some data may
still reside in the QEMUFile's own buffer.  This somewhat complicates the
process of closing the migration thread.  Again, when buffering is gone
buffered_flush will disappear and calling qemu_fflush will not be needed;
in the meanwhile, we expose the function for use in migration.c.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is done by almost all callers of qemu_fflush, move the code
directly to qemu_fflush.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Now that the cancel callback is called consistently for all errors,
we can avoid doing its work in the other callbacks.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is useful, because it lets us keep the cancellation callbacks
inside the big lock while pushing the others out.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The next patch will add more cases where qemu_savevm_state_cancel
needs to be called; prepare for that already, the function can be
called twice with no ill effect.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

vm_stop_force_state does:

    if (runstate_is_running()) {
        vm_stop(state);
    } else {
        runstate_set(state);
    }

migration.c does:

    if (runstate_is_running()) {
        vm_stop(state);
    } else {
        vm_stop_force_state(state);
    }

The code run is the same even if we always use vm_stop_force_state in
migration.c.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Unify the goto around the loop, with the exit condition at the end of it.
Both can be expressed as "while (ret >= 0)".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

* origin/master: (75 commits)
  tcg: Don't make exitreq flag a local temporary
  Makefile: Add subdir dependency on config-devices-all.mak
  make_device_config.sh: Emit dependency file to directory where included
  Revert "make_device_config.sh: Fix target path in generated dependency file"
  s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
  s390/css: Fix subchannel detection
  Allow virtio-net features for legacy s390 virtio bus
  s390: virtio-ccw maintainer
  s390: simplify kvm cpu init
  pseries: Add compatible property to root of device tree
  target-ppc: Move CPU aliases out of translate_init.c
  target-ppc: Report CPU aliases for QMP
  target-ppc: List alias names alongside CPU models
  target-ppc: Make host CPU a subclass of the host's CPU model
  PPC: xnu kernel expects FLUSH to be cleared on STOP
  PPC: Fix dma interrupt
  target-ppc: Fix PPC_DUMP_SPR_ACCESS build
  target-ppc: Synchronize FPU state with KVM
  target-ppc: Add mechanism for synchronizing SPRs with KVM
  Save memory allocation in the elf loader
  ...

* bonzini/hw-dirs:
  sh: move files referencing CPU to hw/sh4/
  ppc: move more files to hw/ppc
  ppc: move files referencing CPU to hw/ppc/
  m68k: move files referencing CPU to hw/m68k/
  i386: move files referencing CPU to hw/i386/
  arm: move files referencing CPU to hw/arm/
  hw: move boards and other isolated files to hw/ARCH
  ppc: express FDT dependency of pSeries and e500 boards via default-configs/
  build: always link device_tree.o into emulators if libfdt available
  hw: include hw header files with full paths
  ppc: do not use ../ in include files
  vt82c686: vt82c686 is not a PCI host bridge
  virtio-9p: remove PCI dependencies from hw/9pfs/
  virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
  hw: move device-hotplug.o to toplevel, compile it once
  hw: move qdev-monitor.o to toplevel directory
  hw: move fifo.[ch] to libqemuutil
  hw: move char backends to backends/

Conflicts:
	backends/baum.c
	backends/msmouse.c
	hw/a15mpcore.c
	hw/arm/Makefile.objs
	hw/arm/pic_cpu.c
	hw/dataplane/event-poll.c
	hw/dataplane/virtio-blk.c
	include/char/baum.h
	include/char/msmouse.h
	qemu-char.c
	vl.c

Resolve conflicts caused by header movements.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  Fix the wrong description in qemu manual
  pci_host: Drop write-only address_space field
  rng-random: Use qemu_open / qemu_close
  configure: Require at least spice-protocol-0.12.3
  osdep: replace setsockopt by qemu_setsockopt
  lm32: remove unused function
  rtc-test: Fix test failures with recent glib
  configure: Create link to icon bitmap for out-of-tree builds

# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
  scsi-disk: handle io_canceled uniformly and correctly
  scsi-disk: do not complete canceled UNMAP requests
  scsi: do not call scsi_read_data/scsi_write_data for a canceled request
  iscsi: look for pkg-config file too
  iscsi: add iscsi_truncate support
  iscsi: retry read, write, flush and unmap on unit attention check conditions

96c63847 did not adjust
Win32 #ifdeffery properly, breaking build in later commits. Fix.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Tested-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 0ba5565b1ed44380c57d4a5fab86e9549f581ebf.1362822910.git.blauwirbel@gmail.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

08744c98 removed hw/baum.h
but did not adjust hw/baum.c, breaking build. Fix.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Message-id: c50406bda98f8b277e8b9004a0012fa5e5c124d0.1362822910.git.blauwirbel@gmail.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The value is not actually live across basic blocks, so there's no
need for the local property.  This eliminates storing the temporary
to its home location at the branch.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

What 23bf49b5 really seemed to try to
fix is that Makefile could recurse into *-softmmu/ subdirectories before
a new *-softmmu/config-devices.mak was generated from pci.mak.

Fix this by adding a dependency on config-all-devices.mak, which in turn
has dependencies on *-softmmu/config-devices.mak.
Reported-by: NGerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Placing the config-devices.mak.d file alongside the config-devices.mak
file in *-softmmu/ lead to it getting included into through
*-softmmu/Makefile in addition to ./Makefile, leading to confusion.

Instead, emit it to ./%-config-devices.mak.d, where it is included.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reverts commit 23bf49b5.

While *-softmmu/config-devices.mak.d is included through *.d pattern via
Makefile.target, the make_devices_config.sh call these dependencies are
for is in ./Makefile. Therefore revert to original behavior.

This should unbreak pci.mak dependencies not propagating.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 's390-for-upstream' of git://github.com/agraf/qemu:
  s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
  s390/css: Fix subchannel detection
  Allow virtio-net features for legacy s390 virtio bus
  s390: virtio-ccw maintainer
  s390: simplify kvm cpu init