There is no reason to keep that out of the function.  The comment refers
to the disassembler's cc_op state rather than the CPUState field.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

CS.RPL is not equal to the CPL in the few instructions between
setting CR0.PE and reloading CS.  We get this right in the common
case, because writes to CR0 do not modify the CPL, but it would
not be enough if an SMI comes exactly during that brief period.
Were this to happen, the RSM instruction would erroneously set
CPL to the low two bits of the real-mode selector; and if they are
not 00, the next instruction fetch cannot access the code segment
and causes a triple fault.

However, SS.DPL *is* always equal to the CPL.  In real processors
(AMD only) there is a weird case of SYSRET setting SS.DPL=SS.RPL
from the STAR register while forcing CPL=3, but we do not emulate
that.
Tested-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On the x86, some devices need access to the CPU reset pin (INIT#).
Provide a generic service to do this, using one of the internal
cpu_interrupt targets.  Generalize the PPC-specific code for
CPU_INTERRUPT_RESET to other targets.

Since PPC does not support migration across QEMU versions (its
machine types are not versioned yet), I picked the value that
is used on x86, CPU_INTERRUPT_TGT_INT_1.  Consequently, TGT_INT_2
and TGT_INT_3 are shifted down by one while keeping their value.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Most MSRs, plus the FPU, MMX, MXCSR, XMM and YMM registers should not
be zeroed on INIT (Table 9-1 in the Intel SDM).  Copy them out of
CPUX86State and back in, instead of special casing env->pat.

The relevant fields are already consecutive except PAT and SMBASE.
However:

- KVM and Hyper-V MSRs should be reset because they include memory
locations written by the hypervisor.  These MSRs are moved together
at the end of the preserved area.

- SVM state can be moved out of the way since it is written by VMRUN.

Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

BND0-3, BNDCFGU, BNDCFGS, BNDSTATUS were not zeroed on reset, but they
should be (Intel Instruction Set Extensions Programming Reference
319433-015, pages 9-4 and 9-6).  Same for YMM.

XCR0 should be reset to 1.

TSC and TSC_RESET were zeroed already by the memset, remove the explicit
assignments.

Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS).  Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.

This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add 'U' suffixes where necessary to avoid (1 << 31) which
shifts left into the sign bit, which is undefined behaviour.
Add the suffix also for other constants in the same groupings
even if they don't shift into bit 31, for consistency.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Default to false.

Tidy variable naming and inline cast uses while at it.

Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NEkaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

When we restore the mxcsr register with FXRSTOR, or set it with gdb,
we need to update the various SSE status flags in CPUX86State
Reported-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx

This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Add some MPX related definiation, and hardcode sizes and offsets
of xsave features 3 and 4. It also add corresponding part to
kvm_get/put_xsave, and vmstate.
Signed-off-by: NLiu Jinsong <jinsong.liu@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On KVM, the KVM_SET_XSAVE would be executed with a 0 xstate_bv,
and not restore anything.

Since FP and SSE data are always valid, set them in xstate_bv at reset
time.  In fact, that value is the same that KVM_GET_XSAVE returns on
pre-XSAVE hosts.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

- since hyperv_* helper functions are used only in target-i386/kvm.c
  move them there as static helpers
Requested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Reviewed-by: NGleb Natapov <gnatapov@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The recent KVM patch adds IA32_FEATURE_CONTROL support. QEMU needs
to clear this MSR when reset vCPU and keep the value of it when
migration. This patch add this feature.
Signed-off-by: NArthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Where no extra implementation is needed, fall back to CPUClass::set_pc().

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for log_cpu_state_mask() changing argument to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU
related -- they are specific to the TLS ABI for a a particular OS.
Move them into the linux-user/ tree where they belong.

target-lm32 had entirely unused implementations, since it has no
linux-user target; just drop them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Introduce x86_cpu_compat_set_features(), that can be used to set/unset
feature bits on specific CPU models for machine-type compatibility.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This replaces the feature-bit fields on both X86CPU and x86_def_t
structs with an array.

With this, we will be able to simplify code that simply does the same
operation on all feature words (e.g. kvm_check_features_against_host(),
filter_features_for_kvm(), add_flagname_to_bitmaps(), CPU feature-bit
property lookup/registration, and the proposed "feature-words" property)

The following field replacements were made on X86CPU and x86_def_t:

  (cpuid_)features         -> features[FEAT_1_EDX]
  (cpuid_)ext_features     -> features[FEAT_1_ECX]
  (cpuid_)ext2_features    -> features[FEAT_8000_0001_EDX]
  (cpuid_)ext3_features    -> features[FEAT_8000_0001_ECX]
  (cpuid_)ext4_features    -> features[FEAT_C000_0001_EDX]
  (cpuid_)kvm_features     -> features[FEAT_KVM]
  (cpuid_)svm_features     -> features[FEAT_SVM]
  (cpuid_)7_0_ebx_features -> features[FEAT_7_0_EBX]
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Consolidate level, xlevel, xlevel2 fields in x86_def_t and CPUX86State.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>