- 02 6月, 2015 1 次提交
-
-
由 Michael S. Tsirkin 提交于
commit 5cb18b3d TPM2 ACPI table support was missing a file, so build with iasl fails (build without iasl works since it uses the generated hex files). Reported-by: N"Daniel P. Berrange" <berrange@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 01 6月, 2015 21 次提交
-
-
由 Ouyang Changchun 提交于
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: NChangchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Make features 64bit wide everywhere. On migration a full 64bit guest_features field is sent if one of the high bits is set, in addition to the lower 32bit guest_features field which must stay for compatibility reasons. That way we send the lower 32 feature bits twice, but the code is simpler because we don't have to split and compose the 64bit features into two 32bit fields. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Needed for virtio features which go from 32bit to 64bit with virtio 1.0 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Ying-Shiuan Pan 提交于
set_host_notifier and set_guest_notifiers supported by virtio-mmio now. Most code copied from virtio-pci. This makes it possible to use vhost-net with virtio-mmio, improving performance by about 30%. The kvm-arm does not yet support irqfd, need to fix the hard-coded part after kvm-arm gets irqfd support. Signed-off-by: NYing-Shiuan Pan <yingshiuan.pan@gmail.com> Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefWhile Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefIncrement Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefShiftRight Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefShiftLeft Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefIndex Opcode. Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefLLess Opcode. Reviewed-by: NShannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Marcel Apfelbaum 提交于
Add encoding for ACPI DefAdd Opcode. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
-
由 Stefan Berger 提交于
Add a TPM2 ACPI table if a TPM 2 is used in the backend. Also add an SSDT for the TPM 2. Rename tpm_find() to tpm_get_version() and have this function return the version of the TPM found, TPMVersion_Unspec if no TPM is found. Use the version number to build version specific ACPI tables. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Berger 提交于
In the TPM passthrough backend driver, modify the probing code so that we can check whether a TPM 1.2 or TPM 2 is being used and adapt the behavior of the TPM TIS accordingly. Move the code that tested for a TPM 1.2 into tpm_utils.c and extend it with test for probing for TPM 2. Have the function return the version of TPM found. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Stefan Berger 提交于
Following the recent upgrade to version 1.3, extend the TPM TIS interface with capabilities introduced for support of a TPM 2. TPM TIS for TPM 2 introduced the following extensions beyond the TPM TIS 1.3 (used for TPM 1.2): - A new 32bit interface Id register was introduced. - New flags for the status (STS) register were defined. - New flags for the capability flags were defined. Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2 on the backend side. Support the old TPM TIS 1.3 configuration if a TPM 1.2 is being used. A subsequent patch will then determine which TPM version is being used in the backend. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Pavel Fedin 提交于
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus. This patch implements passing these IDs in qemu. SMMU is also known to use stream IDs, therefore this addition can also be useful for implementing platforms with SMMU. Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Changes from v1: - Added bus number to the stream ID - Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into msi_send_message() function. Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Markus Armbruster 提交于
build_append_namestringv() and aml_string() first calculate the resulting string's length with vsnprintf(NULL, ...), then allocate, then print for real. Simply use g_strdup_vprintf() or g_vasprintf() instead. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Laszlo Ersek 提交于
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern Machine type. Hence, let us not instantiate the FDC when all of the following apply: - the machine type is pc-q35-2.4 or later, - "-device isa-fdc" is not passed on the command line (nor in the config file), - no "-drive if=floppy,..." is requested. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
The "no_floppy = 1" machine class setting causes "default_floppy" in main() to become zero. Consequently, default_drive() will not call drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no default floppy drive will be created for the virtual machine. In that case, board code should also not insist on the creation of the board-default FDC. The board-default FDC will still be created if the user requests a floppy drive with "-drive if=floppy". Additionally, separate FDCs can be specified manually with "-device isa-fdc". They allow the -device isa-fdc,driveA=... syntax that is more flexible than the one required by the board-default FDC: -global isa-fdc.driveA=... This patch doesn't change the behavior observably, as all Q35 machine types have "no_floppy = 0". Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
Even if board code decides not to request the creation of the FDC (keyed off board-level factors, to be determined later), we should create the FDC nevertheless if the user passes '-drive if=floppy' on the command line. Otherwise '-drive if=floppy' would break without explicit '-device isa-fdc' on such boards. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Laszlo Ersek 提交于
This patch introduces no observable change, but it allows the callers of pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or not request) the creation of the FDC explicitly. At the moment both callers pass constant create_fdctrl=true (hence no observable change). Assuming a board passes create_fdctrl=false, "floppy" will be NULL on output, and (beyond the FDC not being created) that NULL will be passed on to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
-
- 31 5月, 2015 18 次提交
-
-
由 Jason Wang 提交于
Increase the queue limit to 1024. But virtio-ccw and s390-virtio won't support this, this is done through failing device_plugged() for those two transports if the number of virtqueues is greater than 64. Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic. Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
This patch introduce a virtio-s390 specific device_plugged() function and doing the number of virtqueue validation inside. Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
Cc: Alexander Graf <agraf@suse.de> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
This patch introduces virtio_get_num_queues() which iterates the vqs array and return the number of virtqueues used by device. Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
This patch passes error pointer to transport specific device_plugged() callback. Through this way, device_plugged() can do some transport specific check and fail. This will be uesd by following patches that check the number of virtqueues against the transport limitation. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
Instead of adding queues for multiqueue during feature set. This patch did this in .realize(), this will help the following patches that count the number of virtqueues used in .device_plugged() callback. Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Cornelia Huck 提交于
Nearly all transports have been offering VIRTIO_F_NOTIFY_ON_EMPTY, s390-virtio being the exception. There's no reason why it shouldn't offer it as well, though (handling is done in core anyway), so let's move it to the common virtio features. While we're changing it anyway, fix the indentation for the DEFINE_VIRTIO_COMMON_FEATURES macro. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Cornelia Huck 提交于
This was copied from virtio-pci, but it doesn't make much sense for ccw, as it doesn't have to handle the broken implementations this bit is supposed to deal with. Remove it. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Cornelia Huck 提交于
Move host_features from the individual transport proxies into the virtio device. Transports may continue to add feature bits during device plugging. This should it make easier to offer different sets of host features for virtio-1/transitional support. Tested-by: NShannon Zhao <shannon.zhao@linaro.org> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Radim Krčmář 提交于
In the old times, we always had pvpanic in ACPI and a _STA method told the guest not to use it. Automatic generation dropped the _STA method as the specification says that missing _STA means enabled and working. Some guests (Linux) had buggy drivers and this change made them unable to utilize pvpanic. A Linux patch is posted as well, but I think it's worth to make pvpanic useable on old guests at the price of three lines and few bytes of SSDT. The old _STA method was Method (_STA, 0, NotSerialized) { Store (PEST, Local0) If (LEqual (Local0, Zero)) { Return (Zero) } Else { Return (0x0F) }} Igor pointed out that we don't need to use a method to return a constant and that 0xB (don't show in UI) is the common definition now. Also, the device used to be PEVT. (PEVT as in "panic event"?) Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eduardo Habkost 提交于
All pc-i440fx and pc-q35 init functions simply call the corresponding compat function and then call the main init function. Use a macro to generate that code. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eduardo Habkost 提交于
The function is not needed anymore, we can simply call pc_init1() directly. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eduardo Habkost 提交于
This looks like a step backwards, but it will allow pc-0.1[0123] and isapc to follow the same compat+init pattern used by the other machine-types, allowing us to generate all init function using the same macro later. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eduardo Habkost 提交于
This removes the following fields from QEMUMachine: family, alias, reset, hot_add_cpu, units_per_default_bus, no_serial, no_parallel, use_virtcon, use_sclp, no_floppy, no_cdrom, default_display, compat_props, and hw_version. The only users of those fields were already converted to use QOM and MachineClass directly, so they are not needed anymore. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Eduardo Habkost 提交于
The helper is not needed anymore, as the PC machine classes are registered using QOM directly. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-