- 04 12月, 2013 7 次提交
-
-
由 Wenchao Xia 提交于
This case can't run when IMGPROTO=nbd, since it needs to create some internal snapshot which would fail for EOF write request, even when TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto to file. _require_command() is changed to tip what util is missing, instead of printing a blank. Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
Format "raw" doesn't always work on certain file systems (e.g. tmpfs). Use qcow2 to make the allocation status explicit and split into a new case. [Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to group file, and fixed up s/048/074/ copy-paste mistake. --Stefan] Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
Whitespace changes to align columns. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
So that the tests can run faster. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This replaces _unsupported_qemu_io_options and check for support of current cache mode, and allow to provide a default if user didn't specify. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This will allow overriding cache mode from the "-c mode" option. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
The option sets cache mode used in the tests. "-nocache" is changed to an alias to "-c none", and internally passes "-t none" to qemu-io. Python scripts will make use of option this in the next commit. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 03 12月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
The buffer for description file was 4096 which only covers a few hundred of extents. This changes the buffer to dynamic allocated with g_strdup_printf in order to support bigger cases. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 30 11月, 2013 3 次提交
-
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io, and updates all the output files with the following command: cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 29 11月, 2013 4 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Fam Zheng 提交于
Pause the drive and start the block job, so we won't miss the block job. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
They wrap blkdebug "break" and "remove_break". Add optional argument "resume" to cancel_and_wait(). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
iotests.py already has one. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 27 11月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Performing multiple drive-mirror blockjobs on the same qemu instance results in the image file used for the block device being replaced by the newly mirrored file, which is not what we want. Fix this by performing one dedicated test per sync mode. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com Signed-off-by: NAnthony Liguori <aliguori@amazon.com>
-
- 15 11月, 2013 3 次提交
-
-
由 Kevin Wolf 提交于
If an explicit driver option is present, but doesn't specify a valid driver, then bdrv_open() should fail instead of probing the format. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This patch moves ret assignment after reporting original error. We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong" mismatch offset. This fixes two bugs. In the first if branch, setting ret to 1 before using it makes dead code in the next line: pnum is never added to mismatch offset even if ret was 0. In the other if branch, currently the output error is always -4: strerror(-4) -> Unknown error -4 Added regression test in case 048. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 14 11月, 2013 2 次提交
-
-
由 Max Reitz 提交于
Add a new test case in file 041 for mirroring unbacked images in "absolute-paths" mode. This should work, if possible, but most importantly, qemu should never crash. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
If backing file doesn't exist, the error message is confusing and misleading: $ qemu /tmp/a.qcow2 qemu: could not open disk image /tmp/a.qcow2: Could not open file: No such file or directory But... $ ls /tmp/a.qcow2 /tmp/a.qcow2 $ qemu-img info /tmp/a.qcow2 image: /tmp/a.qcow2 file format: qcow2 virtual size: 8.0G (8589934592 bytes) disk size: 196K cluster_size: 65536 backing file: /tmp/b.qcow2 Because... $ ls /tmp/b.qcow2 ls: cannot access /tmp/b.qcow2: No such file or directory This is not intuitive. It's better to have the missing file's name in the error message. With this patch: $ qemu-io -c 'read 0 512' /tmp/a.qcow2 qemu-io: can't open device /tmp/a.qcow2: Could not open backing file: Could not open '/stor/vm/arch.raw': No such file or directory no file open, try 'help open' Which is a little bit better. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 07 11月, 2013 11 次提交
-
-
由 Jeff Cody 提交于
This tests the replay of a data sector in a VHDX image file. The image file is a 10G dynamic image, with 4MB block size. The image was created with qemu-img, and the log left unplayed by modification of the vhdx image format driver. It was verified under both QEMU and Hyper-V that the image file, post log replay, matched. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
This removes the IMGFMT_GENERIC blocker for read-only, so existing iotests run read/write tests for vhdx images created by qemu-img (e.g. tests 001, 002, 003). In addition, this updates the sample image test for the Hyper-V created image, to verify we can write it as well. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
The non-global option output is suppresed in _make_test_img() for output verification in the 0?? tests. This adds suppression for the vhdx-unique options as well. This allows check -vhdx to run successfully. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
When creating images with backing files in the test, the backing file argument was not quoted properly. This caused the test to fail when run from a pathname with a space. Pass the backing argument in with the -b option to _make_test_img, so it can be properly quoted. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
There were still a couple of instances of unquoted usage of $TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail on pathnames with spaces in them. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
There were still instances of $TEST_IMG not being properly quoted. This was in the usage of a string built up for a 'for' loop; modify the loop so we can quote $TEST_IMG properly. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with spaces are supported. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
_make_test_img() currently works with spaced pathnames only when not specifying a backing file. This fixes it so that the backing file argument is properly quoted. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
The usage of $TEST_IMG was not properly quoted everywhere in common.pattern. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Max Reitz 提交于
The actual size of the image file may differ depending on the Linux kernel currently running on the host. Filtering out this value makes this test pass in such cases. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 31 10月, 2013 1 次提交
-
-
由 Fam Zheng 提交于
Implement .bdrv_get_specific_info to return the extent information. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 30 10月, 2013 4 次提交
-
-
由 Fam Zheng 提交于
Case 030 occasionally fails because of block job compltes too fast to be captured by script, and 'unexpected qmp event' of job completion causes the test failure. Simply fill in some data to the test image to make this false alarm less likely to happen. (For other benefits to prefill data to test image, see also commit ab68cdfa). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Add a test case for trying to open an image file where it is impossible to open its backing file (in this case, because it was deleted). When doing this, qemu (or qemu-io in this case) should not crash but rather print an appropriate error message. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
There's a same common function in iotests.py Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Commit 684b2544 forgot to update it. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 10月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Add a test for saving a VM state from a qcow2 image and loading it back (with having restarted qemu in between); this should work without any problems. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 11 10月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Extend 060 by a test which creates a corrupted image with an active L2 entry pointing to an inactive L2 table and writes to the corresponding guest offset. Also, use overlap-check=all for all tests in 060. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-