Signed-off-by: NRichard Henderson <rth@twiddle.net>

We were storing 16 bits instead of 32.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The implementation had been incomplete, as we did not store the
machine type.  Note that the machine_type member is still unset
during initialization, so this has no effect yet.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Also, these are user-mode instructions; allow their use
in CONFIG_USER_ONLY.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The code in the softfloat source files is under a mixture of
licenses: the original code and many changes from QEMU contributors
are under the base SoftFloat-2a license; changes from Stefan Weil
and RedHat employees are GPLv2-or-later; changes from Fabrice Bellard
are under the BSD license. Clarify this in the comments at the
top of each affected source file, including a statement about
the assumed licensing for future contributions, so we don't need
to remember to ask patch submitters explicitly to pick a license.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Acked-by: NAvi Kivity <avi.kivity@gmail.com>
Acked-by: NBen Taylor <bentaylor.solx86@gmail.com>
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Acked-by: NChristophe Lyon <christophe.lyon@st.com>
Acked-by: NFabrice Bellard <fabrice@bellard.org>
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NPaul Brook <paul@codesourcery.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NRichard Henderson <rth@twiddle.net>
Acked-by: NRichard Sandiford <rdsandiford@googlemail.com>
Acked-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421073508-23909-5-git-send-email-peter.maydell@linaro.org

Revert the parts of commits b645bb48 and 5a6932d5 which are still
in the codebase and under a SoftFloat-2b license.

Reimplement support for architectures where the most significant bit
in the mantissa is 1 for a signaling NaN rather than a quiet NaN,
by adding handling for SNAN_BIT_IS_ONE being set to the functions
which test values for NaN-ness.

This includes restoring the bugfixes lost in the reversion where
some of the float*_is_quiet_nan() functions were returning true
for both signaling and quiet NaNs.

[This is a mechanical squashing together of two separate "revert"
and "reimplement" patches.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421073508-23909-4-git-send-email-peter.maydell@linaro.org

Revert the remaining portions of commits 75d62a58 and 3430b0be
which are under a SoftFloat-2b license, ie the functions
uint64_to_float32() and uint64_to_float64(). (The float64_to_uint64()
and float64_to_uint64_round_to_zero() functions were completely
rewritten in commits fb3ea83a and 0a87a310 so can stay.)

Reimplement from scratch the uint64_to_float64() and uint64_to_float32()
conversion functions.

[This is a mechanical squashing together of two separate "revert"
and "reimplement" patches.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421073508-23909-3-git-send-email-peter.maydell@linaro.org

This commit applies the changes to master which correspond to
replacing commit 158142c2 with a set of changes made by:
 * taking the SoftFloat-2a release
 * mechanically transforming the block comment style
 * reapplying Fabrice's original changes from 158142c2

This commit was created by:
 diff -u 158142c2 import-sf-2a
 patch  -p1 --fuzz 10 <../relicense-patch.txt
(where import-sf-2a is the branch resulting from the changes above).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421073508-23909-2-git-send-email-peter.maydell@linaro.org

linux-user updates since last pull request

# gpg: Signature made Tue 27 Jan 2015 20:52:54 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20150127:
  linux-user: support target-to-host SCM_CREDENTIALS
  linux-user: Fix broken m68k signal handling on 64 bit hosts
  mips64-linux-user: Fix definition of struct sigaltstack
  linux-user: Fix ioctl cmd type mismatch on 64-bit targets
  linux-user: translate resource also for prlimit64
  linux-user/signal.c: Remove unnecessary wrapper copy_siginfo_to_user
  linux-user/main.c: Mark end_exclusive() as possibly unused
  linux-user/main.c: Call cpu_exec_start/end on all target archs
  linux-user/arm/nwfpe: Delete unused aCC array
  linux-user/alpha: Add define for NR_shmat to enable shmat syscall
  linux-user/signal.c: Remove current_exec_domain_sig()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When passing ancillary data through a unix socket, handle
credentials properly instead of doing a simple copy and
issuing a warning.
Signed-off-by: NAlex Suykov <alex.suykov@gmail.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The m68k signal frame setup code which writes the signal return
trampoline code to the stack was assuming that a 'long' was 32 bits;
on 64 bit systems this meant we would end up writing the 32 bit
(2 insn) trampoline sequence to retaddr+4,retaddr+6 instead of
the intended retaddr+0,retaddr+2, resulting in a guest crash when
it tried to execute the invalid zero-bytes at retaddr+0.
Fix by using uint32_t instead; also use uint16_t rather than short
for consistency. This fixes bug LP:1404690.

Reported-by: Michel Boaventura
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Without this fix, qemu segfaults when emulating the sigaltstack syscall,
because it incorrectly treats the ss_flags field as 64 bits rather than 32
bits.
Signed-off-by: NEd Swierk <eswierk@skyportsystems.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

linux-user passes the cmd argument of the ioctl syscall as a signed long,
but compares it to an unsigned int when iterating through the ioctl_entries
list.  When the cmd is a large value like 0x80047476 (TARGET_TIOCSWINSZ on
mips64) it gets sign-extended to 0xffffffff80047476, causing the comparison
to fail and resulting in lots of spurious "Unsupported ioctl" errors.
Changing the target_cmd field in the ioctl_entries list to a signed int
causes those values to be sign-extended as well during the comparison.
Signed-off-by: NEd Swierk <eswierk@skyportsystems.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The resource argument is translated from host to target for
[gs]etprlimit but not for prlimit64. Fix this.
Signed-off-by: NFelix Janda <felix.janda@posteo.de>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The function copy_siginfo_to_user() just calls tswap_siginfo(), so
call the latter function directly and delete the wrapper function.
The wrapper is actually misleading since it implies that the
semantics are like the kernel function with the same name which
copies the data to a guest user-space address. In fact tswap_siginfo()
just does data-structure conversion between two structures whose
addresses are host addresses (the copy to userspace is handled
in QEMU by the lock_user/unlock_user calls).

This also fixes clang complaints about the wrapper being unused
in some configs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The aCC array in fpopcode.c is completely unused in QEMU; delete
it (silencing a clang warning).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

For historical reasons, the define for the shmat() syscall on Alpha is
NR_osf_shmat; however it has the same semantics as this syscall does
on all other architectures, so define TARGET_NR_shmat as well so that
QEMU's code for the syscall is enabled.

This patch brings our behaviour on the LTP shmat tests into line
with that for ARM (still not a perfect pass rate but not "this syscall
is completely broken" as we had before).

(Problem detected via a clang warning that the do_shmat() function
was unused on Alpha.)

Cc: Richard Henderson <rth@twiddle.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Remove the function current_exec_domain_sig(), which always returns
its argument. This was intended as a stub for supporting the kernel's
exec_domain handling, but:
 * we don't have any of the other code for execution domains
 * in the kernel this handling is architecture-specific, not generic
 * we only call this function in the x86, ppc and sh4 signal code paths,
   and the PPC one is wrong anyway because the PPC kernel doesn't
   have this signal-remapping code

So it's best to simply delete the function; any future attempt to
implement exec domains will be better served by adding the correct
code from scratch based on the kernel sources at that time.

This change also fixes some clang warnings about the function being
defined but not used for some target architectures.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.  Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  pc-dimm: Add Error argument to pc_existing_dimms_capacity
  pc-dimm: Make pc_existing_dimms_capacity global
  pc: Fix DIMMs capacity calculation
  smbios: Don't report unknown CPU speed (fix SVVP regression)
  smbios: Fix dimm size calculation when RAM is multiple of 16GB
  bios-linker-loader: move source to common location
  bios-linker-loader: move header to common location
  virtio: fix feature bit checks
  bios-tables-test: split piix4 and q35 tests
  acpi: build_append_nameseg(): add padding if necessary
  acpi: update generated hex files
  acpi-test: update expected DSDT
  pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
  pci: Split pcie_host_mmcfg_map()
  Add some trace calls to pci.c.
  ich9: add disable_s3, disable_s4, s4_val properties
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that pc_existing_dimms_capacity() is an API, include Error pointer
as an argument and modify the caller appropriately.
Suggested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Move pc_existing_dimms_capacity() to pc-dimm.c since it would be needed
by PowerPC memory hotplug code too.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pc_existing_dimms_capacity() is returning DIMMs count rather than capacity.
Fix this to return the capacity. Also consider only realized devices for
capacity calculation.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

SVVP requires processor speed on Type 4 structures to not be unknown.
This was fixed in SeaBIOS 0.5.0 (in 2009), but the bug was reintroduced
in QEMU 2.1.

Revert to old behavior and report CPU speed as 2000 MHz instead of
unknown.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

The Memory Device size calculation logic is broken when the RAM size is
a multiple of 16GB, making the size of the last entry be 0 instead of
16GB. Fix the logic to handle that case correctly.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

There are plans to use bios linker by MIPS, ARM.

It's only used by ACPI ATM, so put it in hw/acpi
and make it depend on CONFIG_ACPI.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Will be usable by MIPS, ARM.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Several places check against the feature bit number instead of against
the feature bit. Fix them.

Cc: qemu-stable@nongnu.org
Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This makes it clear which one is failing.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>

According to ACPI spec NameSeg shorter than 4 characters
must be padded up to 4 characters with "_" symbol.
ACPI 5.0:  20.2.2 "Name Objects Encoding"

Do it in build_append_nameseg() so that caller shouldn't know
or care about it.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Previous patch
    pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
changed DSDT, update hex files for non-iasl builds.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Previous patch
    pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
changed DSDT, update expected test files.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

tricore bugfixes and RR1, RR2, RRPW and RRR insn

# gpg: Signature made Tue 27 Jan 2015 12:02:06 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"

* remotes/bkoppelmann/tags/pull-tricore-20150127:
  target-tricore: Add instructions of RRR opcode format
  target-tricore: Add instructions of RRPW opcode format
  target-tricore: Add instructions of RR2 opcode format
  target-tricore: Add instructions of RR1 opcode format, that have 0x93 as first opcode
  target-tricore: split up suov32 into suov32_pos and suov32_neg
  target-tricore: Fix bugs found by coverity
  target-tricore: calculate av bits before saturation
  target-tricore: Several translator and cpu model fixes
  target-tricore: Add missing ULL suffix on 64 bit constant
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add microcode generator function gen_cond_sub.

Add helper functions:
    * ixmax/ixmin: search for the max/min value and its related index in a
                   vector of 16-bit values.
    * pack: dack two data registers into an IEEE-754 single precision floating
            point format number.
    * dvadj: divide-adjust the result after dvstep instructions.
    * dvstep: divide a reg by a divisor, producing 8-bits of quotient at a time.

OPCM_32_RRR_FLOAT -> OPCM_32_RRR_DIVIDE
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

suov checks unsigned for an overflow and an underflow, after some arithmetic
operations and saturates the result to either max_uint32 or 0. So far we
handled this by expanding to the next bigger data type and compare whether
the result is > max_uint32 or < 0.

However this approach can fail for an 32 bit multiplication, if both operands of
the multiplication are 0x80000000. This sets the sign bit of the 64 bit integer
and would result in a false saturation to 0.

Since unsigned operations, e.g add, sub, mul always result in either a positive
or negative overflow, we split the functions for suov32 up into two functions
(suov32_pos, suov32_neg) for each case.
Signed-off-by: NBastian Koppelmann <kbastian@mail.uni-paderborn.de>