Suggested by Aurelien Jarno.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Although it's rare to happen in live migration, when the head of a
byte stream contains 0x05 which is the marker of subsection, the
loader gets corrupted because vmstate_subsection_load() continues even
the device doesn't require it.  This patch adds a checker whether
subsection is needed, and skips following routines if not needed.
Signed-off-by: NYoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

 - 06d0bdd Minor build fixes.
 - 33abfc0 Update version to 0.6.1.2.
 - 484dd56 fix virtio-blk failure after reboot
 - dd9c0d3 Update version to 0.6.1.1.
 - 50ecfa8 mark irq9 active high in DSDT
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When MSI is off, each interrupt needs to be bounced through the io
thread when it's set/cleared, so vhost-net causes more context switches and
higher CPU utilization than userspace virtio which handles networking in
the same thread.

We'll need to fix this by adding level irq support in kvm irqfd,
for now disable vhost-net in these configurations.

Added a vhostforce flag to force vhost-net back on.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With current sndbuf default value, a blocked
target guest can prevent another guest from
transmitting any packets. While current
sndbuf value (1M) is reported to help some
UDP based workloads, the default should
be safe (0).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that no backend's open function saves the passed QemuOpts, fix a leak
in the qemu_chr_open backwards-compatible parser.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A nicer solution would be to get rid of the opaque pointer and
use containment, but it would also be a much bigger patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This also requires moving QemuOpts out of term_init.

Clearing ISIG is independent of whether echo is enabled or disabled.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In the next patch, term_init will be changed to enable or disable
echo at will.  Move extraneous stuff out of it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This code is taking the settings for a serial port and moving it to
fd 0 when qemu exits.  This is likely just cut-and-paste, rip it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

aliguori: fix build with !defined(KVM_CAP_ASYNC_PF)
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Conflicts:
	trace-events

commit 52c18be9 introduced a regression in the
change vnc password command that changed the behavior of setting the VNC
password to an empty string from disabling login to disabling authentication.

This commit refactors the code to eliminate this overloaded semantics in
vnc_display_password and instead introduces the vnc_display_disable_login.   The
monitor implementation then determines the behavior of an empty or missing
string.

Recently, a set_password command was added that allows both the Spice and VNC
password to be set.  This command has not shown up in a release yet so the
behavior is not yet defined.

This patch proposes that an empty password be treated as an empty password with
no special handling.  For specifically disabling login, I believe a new command
should be introduced instead of overloading semantics.

I'm not sure how Spice handles this but I would recommend that we have Spice
and VNC have consistent semantics here for the 0.14.0 release.
Reported-by: NNeil Wilson <neil@aldur.co.uk>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - Add a proper return to make sure that login is really disabled instead of
   relying on the VNC server to treat empty passwords specially

Suppress a gcc array bounds overrun warning when filling in the SPARC
signal frame by adjusting our definition of the structure so that the
fp and callers_pc membes are part of the ins[] array rather than
separate fields; since qemu has no need to access the fields individually
there is no need to follow the kernel's structure field naming exactly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The Ubuntu 10.10 gcc for ARM complains that we might be overrunning
the cpu_irqs[][] array: silence this by correcting the bounds on the
loop. (In fact we would not have overrun the array because bit
MAX_PILS in pil_pending and irl_out will always be 0.)

Also add a comment about why the loop's lower bound is OK.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The "leon3_cache_control_int" (op_helper.c) function is called within leon3.c
which leads to segfault error with the global "env".

Now cache control is a CPU feature and everything is handled in op_helper.c.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Watch this:

    (qemu) drive_add 0 if=none
    (qemu) info block
    none0: type=hd removable=0 [not inserted]
    (qemu) drive_del none0
    Segmentation fault (core dumped)

add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't.  This leaves the DriveInfo with member
opts dangling.  drive_del attempts to free it, and dies.

drive_init() behaves as follows:

* If it created a drive with media, it returns its DriveInfo.

* If it created a drive without media, it clears *fatal_error and
  returns NULL.

* If it couldn't create a drive, it sets *fatal_error and returns
  NULL.

Of its three callers:

* drive_init_func() is correct.

* usb_msd_init() assumes drive_init() failed when it returns NULL.
  This is correct only because it always passes option "file", and
  "drive without media" can't happen then.

* add_init_drive() assumes drive_init() failed when it returns NULL.
  This is incorrect.

Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Let the callers build the optstr.  Only one wants to.  All the others
become simpler, because they don't have to worry about escaping '%'.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We silently ignore multiple definitions for the same drive:

    $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant
    QEMU 0.13.50 monitor - type 'help' for more information
    (qemu) info block
    ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0

With if=none, this can become quite confusing:

    $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei
    qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei'

The second -device fails, because it refers to drive zwei, which got
silently ignored.

Make multiple drive definitions fail cleanly.

Unfortunately, there's code that relies on multiple drive definitions
being silently ignored: main() merrily adds default drives even when
the user already defined these drives.  Fix that up.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Before, type & index were hidden in printf-like fmt, ... parameters,
which get expanded into an option string.  Rather inconvenient for
uses later in this series.

New IF_DEFAULT to ask for the machine's default interface.  Before,
that was done by having no option "if" in the option string.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Before commit 622b520f, index=12 meant bus=1,unit=5.

Since the commit, it means bus=0,unit=12.  The drive is created, but
not the guest device.  That's because the controllers we use with
if=scsi drives (lsi53c895a and esp) support only 7 units, and
scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers
exceeding that limit.

Changing the mapping of index to bus, unit is a regression.  Breaking
-drive invocations that used to work just makes it worse.

Revert the part of commit 622b520f that causes this, and clean up
some.

Note that the fix only affects if=scsi.  You can still put more than 7
units on a SCSI bus with -device & friends.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Turns drive_init()'s lengthy conditional into a concise loop, and
makes the data available elsewhere.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qdev_init_bdrv() doesn't belong into qdev.c; it's about drives, not
qdevs.  Rename to drive_get_next, move to blockdev.c, drop the bogus
DeviceState argument, and return DriveInfo instead of
BlockDriverState.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Variables l2_modified and l2_size are not really used, remove them.
Spotted by GCC 4.6.0:
  CC    block/qcow2-refcount.o
/src/qemu/block/qcow2-refcount.c: In function 'qcow2_update_snapshot_refcount':
/src/qemu/block/qcow2-refcount.c:708:37: error: variable 'l2_modified' set but not used [-Werror=unused-but-set-variable]
/src/qemu/block/qcow2-refcount.c:708:9: error: variable 'l2_size' set but not used [-Werror=unused-but-set-variable]

CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

drive_init() picks the first free bus and unit number, unless the user
specifies them.

This isn't a good fit for the drive_add monitor command, because there
we specify the controller by PCI address instead of using bus number
set by drive_init().

scsi_hot_add() takes care to replace the unit number set by
drive_init() by the real one, but it neglects to replace the bus
number.  Thus, bus/unit in DriveInfo may be bogus.  Affects
drive_get() and drive_get_max_bus().  I'm not aware of anything bad
happening because of that; looks like by the time we're hot-plugging,
the two functions aren't used anymore.  Fix it anyway.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The consistency check on open is necessary in order to fix inconsistent
table offsets left as a result of a crash mid-operation.  Images with a
backing file actually flush before updating table offsets and are
therefore guaranteed to be consistent.  Do not mark these images dirty.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>