Speeds up the build.

xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Still no retb
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

* qemu-kvm/uq/master:
  kvm: i8254: Fix conversion of in-kernel to userspace state
  kvm/apic: correct short memset

* sstabellini/for_1.1.1:
  qemu/xendisk: set maximum number of grants to be used

* afaerber-or/qom-cpu-3a: (27 commits)
  target-s390x: Pass S390CPU to s390_cpu_restart()
  s390-virtio: Let s390_cpu_addr2state() return S390CPU
  s390-virtio: Use cpu_s390x_init() to obtain S390CPU
  target-s390x: Let cpu_s390x_init() return S390CPU
  xen_machine_pv: Use cpu_x86_init() to obtain X86CPU
  arm_pic: Pass ARMCPU to arm_pic_init_cpu()
  arm_boot: Pass ARMCPU to arm_load_kernel()
  xilinx_zynq: Use cpu_arm_init() to obtain ARMCPU
  pxa2xx_gpio: Store ARMCPU in PXA2xxGPIOInfo
  pxa2xx_pic: Store ARMCPU in PXA2xxPICState
  pxa2xx: Pass ARMCPU to pxa2xx_pic_init()
  exynos4210: Use cpu_arm_init() to store ARMCPU
  vexpress: Use cpu_arm_init() to obtain ARMCPU
  realview: Use cpu_arm_init() to obtain ARMCPU
  arm_boot: Pass ARMCPU to arm_boot_info::secondary_cpu_reset_hook()
  arm_boot: Pass ARMCPU to arm_boot_info::write_secondary_boot()
  versatilepb: Use cpu_arm_init() to obtain ARMCPU
  musicpal: Use cpu_arm_init() to obtain ARMCPU
  integratorcp: Use cpu_arm_init() to obtain ARMCPU
  strongarm: Use cpu_arm_init() to store ARMCPU in StrongARMState
  ...

* afaerber-or/qom-next-1:
  target-i386: Use uint32 visitor for [x]level properties
  qdev: Remove PropertyInfo range checking
  qdev: Switch property accessors to fixed-width visitor interfaces
  qdev: Use int32_t container for devfn property
  qapi: Add String visitor coverage to serialization unit tests
  qapi: String visitor, use %f representation for floats
  qapi: Unit tests for visitor-based serialization
  qapi: Add Visitor interfaces for uint*_t and int*_t

* stefanha/trivial-patches:
  configure: report missing libraries for virtfs
  trace/simple.c: fix deprecated glib2 interface
  Clarify comments of tb_invalidate_phys_[page_]range

* kraxel/usb.52: (37 commits)
  ehci: rework frame skipping
  ehci: adaptive wakeup rate.
  ehci: create ehci_update_frindex
  ehci: remove unused attach_poll_counter
  ehci: fix halt status handling
  ehci: update status bits in ehci_set_state
  ehci: add ehci_*_enabled() helpers
  ehci: fix reset
  ehci: kick async schedule on wakeup
  ehci: schedule async bh on async packet completion
  ehci: move async schedule to bottom half
  ehci: add async field to EHCIQueue
  ehci: tweak queue initialization
  ehci: add queuing support
  ehci: move ehci_flush_qh
  ehci: cache USBDevice in EHCIQueue
  ehci: make ehci_execute work on EHCIPacket instead of EHCIQueue
  ehci: add EHCIPacket
  xhci: trace: slots
  xhci: trace: transfers
  ...

Due to a offset between the clock used to generate the in-kernel
count_load_time (CLOCK_MONOTONIC) and the clock used for processing this
in userspace (vm_clock), reading back the output of PIT channel 2 via
port 0x61 was broken. One use cases that suffered from it was the CPU
frequency calibration of SeaBIOS, which also affected IDE/AHCI timeouts.

This fixes it by calibrating the offset between both clocks on
kvm_pit_get and adjusting the kernel value before saving it in the
userspace state. As the calibration only works while the vm_clock is
running, we cache the in-kernel state across stopped phases.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Legacy (non-pvops) gntdev drivers may require this to be done when the
number of grants intended to be used simultaneously exceeds a certain
driver specific default limit.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

kvm_put_apic_state's attempt to clear *kapic before setting its
bits cleared sizeof(void*) bytes (no more than 8) rather than the
intended 1024 (KVM_APIC_REG_SIZE) bytes. Spotted by coverity.
Signed-off-by: NJim Meyering <meyering@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed for qemu_cpu_kick().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Convert ipi_states to S390CPU**.

Needed for s390_cpu_restart() in handle_sigp().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Needed to store S390CPU in ipi_states[].
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Let cpu_init() return CPUS390XState for backwards compatibility.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Needed for moving halted field to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Tested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Pass it through to arm_pic_cpu_handler().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)

In particular this simplifies the &s->mpu->cpu->env expression again.

first_cpu and ->next_cpu are expected to be QOM'ified later.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_load_kernel().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>

Prepares for moving halted field into CPUState.

Add missing braces.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Prepares for moving halted field to CPUState.

Add missing braces.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Cleans up after storing ARMCPU in PXA2xxState.
Prepares for storing ARMCPU in PXA2xxPICState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_pic_init_cpu().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>

Needed for arm_pic_init_cpu().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_pic_init_cpu().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Adapt highbank accordingly.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Adapt exynos4210 and highbank accordingly.
The parameter itself is unused.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)

Needed for arm_load_kernel().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_load_kernel().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_load_kernel().

Add missing braces.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Adapt collie accordingly.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid cpu->cpu by using "mpu" as variable name.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

omap_mpu_state_s::env was renamed to cpu while changing its type.
With n800_s::cpu of type omap_mpu_state_s* this leads to s->cpu->cpu.

Rename the field to "mpu" to avoid this ugliness.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

This reverts commit 25f27a4f
because of bsd-user breakage.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>