Currently the device tree node for the XICS interrupt controller is in
spapr_create_fdt_skel().  As part of consolidating device tree construction
to reset time, this moves it to a function called from spapr_build_fdt().

In addition we move the actual code into hw/intc/xics_spapr.c with the
rest of the PAPR specific interrupt controller code.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

At each system reset, the pseries machine needs to load RTAS (the runtime
portion of the guest firmware) into the VM.  This means copying
the actual RTAS code into guest memory, and also updating the device
tree so that the guest OS and boot firmware can locate it.

For historical reasons the copy and update to the device tree were in
different parts of the code.  This cleanup brings them both together in
an spapr_load_rtas() function.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The flattened device tree passed to pseries guests contains a list of
reserved memory areas.  Currently we construct this list early in
spapr_create_fdt_skel() as we sequentially write the fdt.

This will be inconvenient for upcoming cleanups, so this patch moves
the reserve map changes to the end of fdt construction.  This changes
fdt_add_reservemap_entry() calls - which work when writing the fdt
sequentially to fdt_add_mem_rsv() calls used when altering the fdt in
random access mode.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Currently spapr_create_fdt_skel() takes a bunch of individual parameters
for various things it will put in the device tree.  Some of these can
already be taken directly from sPAPRMachineState.  This patch alters it so
that all of them can be taken from there, which will allow this code to
be moved away from its current caller in future.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

These values are used only within ppc_spapr_reset(), so just change them
to local variables.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

spapr_finalize_fdt() both finishes building the device tree for the guest
and loads it into guest memory.  For future cleanups, it's going to be
more convenient to do these two things separately.  The loading portion is
pretty trivial, so we move it inline into the caller, ppc_spapr_reset().

We also rename spapr_finalize_fdt(), because the current name is going to
become inaccurate.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

vmul10uq  : Vector Multiply-by-10 Unsigned Quadword VX-form
vmul10euq : Vector Multiply-by-10 Extended Unsigned Quadword VX-form
vmul10cuq : Vector Multiply-by-10 & write Carry Unsigned Quadword VX-form
vmul10ecuq: Vector Multiply-by-10 Extended & write Carry Unsigned Quadword VX-form
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
[ Add GEN_VXFORM_DUAL_EXT with invalid bit mask ]
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

As Qemu only supports a single instance of the ISA bus, we use the LPC
controller of chip 0 to create one and plug in a couple of useful
devices, like an UART and RTC. An IPMI BT device, which is also an ISA
device, can be defined on the command line to connect an external BMC.
That is for later.

The PowerNV machine now has a console. Skiboot should load a kernel
and jump into it but execution will stop quite early because we lack a
model for the native XICS controller for the moment :

    [    0.000000] NR_IRQS:512 nr_irqs:512 16
    [    0.000000] XICS: Cannot find a Presentation Controller !
    [    0.000000] ------------[ cut here ]------------
    [    0.000000] WARNING: at arch/powerpc/platforms/powernv/setup.c:81
    ...
    [    0.000000] NIP [c00000000079d65c] pnv_init_IRQ+0x30/0x44

You can still do a few things under xmon.

Based on previous work from :
      Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
[dwg: Trivial fix for a change in the serial_hds_isa_init() interface]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The LPC (Low Pin Count) interface on a POWER8 is made accessible to
the system through the ADU (XSCOM interface). This interface is part
of set of units connected together via a local OPB (On-Chip Peripheral
Bus) which act as a bridge between the ADU and the off chip LPC
endpoints, like external flash modules.

The most important units of this OPB are :
 - OPB Master: contains the ADU slave logic, a set of internal
   registers and the logic to control the OPB.
 - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of
   internal registers and the LPC HOST Controller to control the LPC
   interface.

Four address spaces are provided to the ADU :
 - LPC Bus Firmware Memory
 - LPC Bus Memory
 - LPC Bus I/O (ISA bus)
 - and the registers for the OPB Master and the LPC Host Controller

On POWER8, an intermediate hop is necessary to reach the OPB, through
a unit called the ECCB. OPB commands are simply mangled in ECCB write
commands.

On POWER9, the OPB master address space can be accessed via MMIO. The
logic is same but the code will be simpler as the XSCOM and ECCB hops
are not necessary anymore.

This version of the LPC controller model doesn't yet implement support
for the SerIRQ deserializer present in the Naples version of the chip
though some preliminary work is there.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
      - ported on latest PowerNV patchset
      - changed the XSCOM interface to fit new model
      - QOMified the model
      - moved the ISA hunks in another patch
      - removed printf logging
      - added a couple of UNIMP logging
      - rewrote commit log ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Now that we are using real HW ids for the cores in PowerNV chips, we
can route the XSCOM accesses to them. We just need to attach a
specific XSCOM memory region to each core in the appropriate window
for the core number.

To start with, let's install the DTS (Digital Thermal Sensor) handlers
which should return 38°C for each core.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves
as a backbone to connect different units of the system. The host
firmware connects to the PIB through a bridge unit, the
Alter-Display-Unit (ADU), which gives him access to all the chiplets
on the PCB network (Pervasive Connect Bus), the PIB acting as the root
of this network.

XSCOM (serial communication) is the interface to the sideband bus
provided by the POWER8 pervasive unit to read and write to chiplets
resources. This is needed by the host firmware, OPAL and to a lesser
extent, Linux. This is among others how the PCI Host bridges get
configured at boot or how the LPC bus is accessed.

To represent the ADU of a real system, we introduce a specific
AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The
translation of an XSCOM address into a PCB register address is
slightly different between the P9 and the P8. This is handled before
the dispatch using a 8byte alignment for all.

To customize the device tree, a QOM InterfaceClass, PnvXScomInterface,
is provided with a populate() handler. The chip populates the device
tree by simply looping on its children. Therefore, each model needing
custom nodes should not forget to declare itself as a child at
instantiation time.

Based on previous work done by :
      Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NCédric Le Goater <clg@kaod.org>
[dwg: Added cpu parameter to xscom_complete()]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This is largy inspired by sPAPRCPUCore with some simplification, no
hotplug for instance. A set of PnvCore objects is added to the PnvChip
and the device tree is populated looping on these cores.

Real HW cpu ids are now generated depending on the chip cpu model, the
chip id and a core mask. The id is propagated to the CPU object, using
properties, to set the SPR_PIR (Processor Identification Register)
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The Processor Identification Register (PIR) is a register that holds a
processor identifier which is used for bus transactions (XSCOM) and
for processor differentiation in multiprocessor systems. It also used
in the interrupt vector entries (IVE) to identify the thread serving
the interrupts.

P9 and P8 have some differences in the CPU PIR encoding.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This will be used to build real HW ids for the cores and enforce some
limits on the available cores per chip.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This is is an abstraction of a POWER8 chip which is a set of cores
plus other 'units', like the pervasive unit, the interrupt controller,
the memory controller, the on-chip microcontroller, etc. The whole can
be seen as a socket. It depends on a cpu model and its characteristics:
max cores and specific inits are defined in a PnvChipClass.

We start with an near empty PnvChip with only a few cpu constants
which we will grow in the subsequent patches with the controllers
required to run the system.

The Chip CFAM (Common FRU Access Module) ID gives the model of the
chip and its version number. It is generally the first thing firmwares
fetch, available at XSCOM PCB address 0xf000f, to start initialization.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The goal is to emulate a PowerNV system at the level of the skiboot
firmware, which loads the OS and provides some runtime services. Power
Systems have a lower firmware (HostBoot) that does low level system
initialization, like DRAM training. This is beyond the scope of what
qemu will address in a PowerNV guest.

No devices yet, not even an interrupt controller. Just to get started,
some RAM to load the skiboot firmware, the kernel and initrd. The
device tree is fully created in the machine reset op.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
      - replaced fprintf by error_report
      - used a common definition of _FDT macro
      - removed VMStateDescription as migration is not yet supported
      - added IBM Copyright statements
      - reworked kernel_filename handling
      - merged PnvSystem and sPowerNVMachineState
      - removed PHANDLE_XICP
      - added ppc_create_page_sizes_prop helper
      - removed nmi support
      - removed kvm support
      - updated powernv machine to version 2.8
      - removed chips and cpus, They will be provided in another patches
      - added a machine reset routine to initialize the device tree (also)
      - french has a squelette and english a skeleton.
      - improved commit log.
      - reworked prototypes parameters
      - added a check on the ram size (thanks to Michael Ellerman)
      - fixed chip-id cell
      - changed MAX_CPUS to 2048
      - simplified memory node creation to one node only
      - removed machine version
      - rewrote the device tree creation with the fdt "rw" routines
      - s/sPowerNVMachineState/PnvMachineState/
      - etc.]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

When configured to compile out of tree, the configure script
copies BIOS blobs to the build directory. However since the PPC64 powernv
machine ROM has .lid extension, it is ignored and "make check" fails
when trying the powernv machine.

This adds *.lid to the list of copied blobs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This is the initial image of skiboot 5.3.7 (commit 762d0082) for
the PowerPC PowerNV (Non-Virtualized) platform. Built from
submodule.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The original QOMification of the spapr VIO devices in 3954d33a "spapr:
convert to QEMU Object Model (v2)" moved some callbacks from the
VIOsPAPRBus structure to the VIOsPAPRDeviceClass.  Except, that it
forgot to actually remove them from the VIOsPAPRBus structure (which
still exists, though it doesn't fulfill quite the same function as it
did pre-QOM).

This patch removes those now unused callback fields.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NThomas Huth <thuth@redhat.com>

Power ISA specifies ME bit handling for system reset interrupt:

    if the interrupt occurred while the thread was in power-saving
    mode, set to 1; otherwise not altered

Power ISA 3.0, section 6.5 "Interrupt Definitions", Figure 64.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The routines :

	void icp_set_cppr(ICPState *icp, uint8_t cppr);
	void icp_set_mfrr(ICPState *icp, uint8_t mfrr);
	void icp_eoi(ICPState *icp, uint32_t xirr);

now use one 'ICPState *icp' argument instead of a 'XICSState *' and a
server arguments. The backlink on XICSState* is used whenever needed.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The link will be used to change the API of the icp_* routines which
are still using an XICSState as an argument.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

xics_spapr and xics_kvm nearly define the same 'set_nr_servers'
handler. Only the type of the ICP differs. So let's make a common one
to remove some duplicated code.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Add required helpers (GEN_XX2FORM_EO) for supporting this instruction.

xxbrh: VSX Vector Byte-Reverse Halfword
xxbrw: VSX Vector Byte-Reverse Word
xxbrd: VSX Vector Byte-Reverse Doubleword
xxbrq: VSX Vector Byte-Reverse Quadword
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Vector Integer Negate Instructions:

vnegw: Vector Negate Word
vnegd: Vector Negate Doubleword
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The header now only contains inline functions related to the
Sun NVRAM, so the a name like sun_nvram.h seems to be more
appropriate now.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Everything that is related to CHRP NVRAM should rather reside in
chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The system and free space NVRAM partitions (for OpenBIOS) are created
in exactly the same way as the Mac-style CHRP NVRAM partitions, so we
can use the new common helper functions to do this job here, too.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The "system partition" and "free space" partition layouts are
defined by the CHRP and LoPAPR specification, and used by
OpenBIOS and SLOF. We can re-use this code for other machines
that use OpenBIOS and SLOF, too. So let's make this code independent
from the MAC NVRAM environment and put it into two proper helper
functions.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

With the addition of "numa_node" properties for PHBs we began
advertising NUMA affinity in cases where nb_numa_nodes > 1.

Since the default on the guest side is to make no assumptions about
PHB NUMA affinity (defaulting to -1), there is still a valid use-case
for explicitly defining a PHB's NUMA affinity even when there's just
one node. In particular, some workloads make faulty assumptions about
/sys/bus/pci/<devid>/numa_node being >= 0, warranting the use of
this property as a workaround even if there's just 1 PHB or NUMA
node.

Enable this use-case by always advertising the PHB's NUMA affinity
if "numa_node" has been explicitly set.

We could achieve this by relaxing the check to simply be
nb_numa_nodes > 0, but even safer would be to check
numa_info[nodeid].present explicitly, and to fail at start time
for cases where it does not exist.

This has an additional affect of no longer advertising PHB NUMA
affinity unconditionally if nb_numa_nodes > 1 and "numa_node"
property is unset/-1, but since the default value on the guest
side for each PHB is also -1, the behavior should be the same for
that situation. We could still retain the old behavior if desired,
but the decision seems arbitrary, so we take the simpler route.

Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Shivaprasad G. Bhat <shivapbh@in.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

but disable MSI-X tests on SPAPR as we can't check the result
(the memory region used on PC is not readable on SPAPR).
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This patch replaces calls to qtest_start() and qtest_end() by
calls to qtest_pc_boot() and qtest_shutdown().

This allows to initialize memory allocator and PCI interface
functions. This will ease to enable virtio tests on other
architectures by only adding a specific qtest_XXX_boot() (like
qtest_spapr_boot()).
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Move the definition to libqos/virtio.h as it must be used
only with virtio functions.

Add a QVirtioDevice parameter as it will be needed to
know if the virtio device is using virtio 1.0 specification
and thus is always little-endian (to do)
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This allows to not have to pass bus and device for every virtio functions.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
[dwg: Fix style nit]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

qtest_spapr_boot()/qtest_pc_boot()/qtest_boot() call qtest_vboot()
and qtest_vboot() calls g_malloc(),
and g_malloc() never fails:
if memory allocation fails, the application is terminated.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

vs is allocated in qvirtio_scsi_pci_init() and never freed.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Useful to debug interrupt problems.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
      - added a test on ->irqs as it is not necessarily allocated
        (PHB3_MSI)
      - removed static variable g_xics and replace with a loop on all
        children to find the xics objects.
      - rebased on InterruptStatsProvider interface ]
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The main changes are:
* virtio-serial
* booting speed imrovement
* better PCI bridge support

The complete changelog is:
  > virtio-serial: Fix compile error
  > scsi: Remove debug functions from scsi-loader.fs
  > scsi: Remove unused read-6 command
  > obp-tftp: Remove the ciregs-buffer
  > libnet: Simplify the net-load arguments passing
  > libnet: Simplify the Forth-to-C wrapper of ping()
  > Do not link libnet to net-snk anymore, and remove net-snk from board-qemu
  > Add a Forth-to-C wrapper for the ping command, too
  > Link libnet code to Paflof and add a wrapper for netboot()
  > Remember execution tokens of "write" and "read" for socket operations
  > Add virtio-serial device support
  > Generalize output banner write routine
  > Improve indentation in OF.fs
  > scsi: implement READ (16) command
  > rtas: Improve rtas-do-config-@ and rtas-do-config-! a little bit
  > libnet: Make netapps.h includable from .code files
  > libnet: Remove unused prototypes from netapps.h
  > libnet: Fix the printout of the ping command
  > libnet: Make sure to close sockets when we're done
  > scsi: implement read-capacity-16
  > pci: Fix secondary and subordinate PCI bus enumeration with board-qemu
  > pci-phb: Fix stack underflow in phb-pci-walk-bridge
  > paflof: Add a read() function to read keyboard input
  > paflof: Add socket(), send() and recv() functions to paflof
  > paflof: Provide get_timer() and set_timer() helper functions
  > paflof: Add a write_mm_log helper function
  > paflof: Copy sbrk code from net-snk
  > paflof: Use CFLAGS from make.rules instead of completely redefining them
  > Do not include the FCode evaluator by default anymore
  > Source code beautification of board-qemu/slof/pci-interrupts.fs
  > Allow PCI devices in PCI bridge slots greater than 4
  > Fix bad interrupt pin numbering in interrupt-map property of PCI bridges
  > Improve SLOF_alloc_mem_aligned()
  > instance: Fix set-my-args for empty arguments
  > Fix remaining compiler warnings in sloffs.c
  > Remove misleading padding fields from ROM header definition
  > Improve indentation in calculatecrc.h
  > Do not include calculatecrc.h from assembler files
  > Remove unused defines in calculatecrc.h
  > libnet: Re-initialize global variables at the beginning of tftp()
  > Remove dependency on cpu/@0 for booting
  > usb: Set XHCI slot speed according to port status
  > usb: Build correct route string for USB3 devices behind a hub
  > usb: Initialize USB3 devices on a hub and keep track of hub topology
  > usb: Increase amount of maximum slot IDs and add a sanity check
  > usb: Move XHCI port state arrays from header to .c file
  > tools: add copy functionality
  > tools: added support to sloffs to read from /dev/slof_flash
  > tools: added file append functionality
  > tools: use crc checking code from romfs/tools
  > tools: added initial version of sloffs
  > romfs: factored out crc code, to make it usable from other locations
  > tools: remove unused parts from the Makefile
  > usb-hid: Fix non-working comma key
  > fat-files: Fix access to FAT32 dir/files when cluster > 16-bits
  > virtio-net: fix ring handling in receive
  > net: Remove remainders of the MTFTP code
  > net: Move also files from clients/net-snk/app/netapps/ to lib/libnet/
  > net: Move files from clients/net-snk/app/netlib/ to lib/libnet/
  > net-snk: Get rid of netlib and netapps prefixes in include statements
  > usb-xhci: assign field4 before conditional
  > Improve F12 key handling in boot menu
  > Fix stack underflow that occurs with duplicated ESC in input
  > rtas-nvram: optimize erase
  > ipv6: Replace magic number 1500 with ETH_MTU_SIZE (i.e. 1518)
  > ipv6: Fix NULL pointer dereference in ip6addr_add()
  > ipv6: Fix memory leak in set_ipv6_address() / ip6_create_ll_address()
  > ipv6: Clear memory after malloc if necessary
  > ipv6: Fix possible NULL-pointer dereference in send_ipv6()
  > ping: use gateway address for routing
  > ping: add netmask in the ping argument
  > xhci: fix missing keys from keyboard
  > xhci: add memory barrier after filling the trb
  > loaders: Remove netflash command
  > boot: Remove legacy Forth words for network loading
  > base: Move cnt-bits and bcd-to-bin to board-js2x folder
  > base: Move huge-tftp-load variable to obp-tftp package
  > base: Remove unused IP address conversion functions
  > virtio: White space cleanup in virtio-9p.c
  > virtio: Add modern version 1.0 support to 9p driver
  > virtio: Set a proper name for virtio-9p device tree nodes
  > pci: Fix mistype in "unkown-bridge"
  > ipv6: Indent code with tabs, not with spaces
  > ipv6: send_ipv6() has to return after doing NDP
  > ipv6: Do not use unitialized MAC address array
  > ipv6: Add support for sending packets through a router
  > Remove unused sms code.
  > virtio-net: initialize to populate mac address
  > libbootmsg: Do not use '\b' characters when printing checkpoints
  > dev-null: The "read" function has to return 0 if nothing has been read
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

audio: intel-hda: check stream entry count during transfer

# gpg: Signature made Thu 27 Oct 2016 15:30:51 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-audio-20161027-1:
  audio: intel-hda: check stream entry count during transfer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>