- 07 9月, 2011 3 次提交
-
-
由 Gerd Hoffmann 提交于
Two fixes for the price of one ;) First, reinitialize the endpoint table after device reset. This is needed anyway as the reset might have switched interfaces. It also clears the endpoint halted state. Second the CLEAR_HALT ioctl wants a unsigned int passed in as argument, not uint8_t. This gets my usb sd card reader (sandisk micromate) going. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Don't report errors on devices which are in disconnected and closing state.
-
由 Gerd Hoffmann 提交于
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in favor of the trace points. Also cleanup error reporting a bit while being at it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 06 9月, 2011 11 次提交
-
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
No change to the CPU kinds, so SMP will only work if manually changing the cpu to 34Kf: -cpu 34Kf -smp 2 Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
+ some partial support for TC's. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Only TC0 on VPE0 is active after reset. All other VPEs and TCs start in sleep. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Boards can override the setup if needed. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
1. The pending need to pass the Status IM gating. 2. The priority is from seven (highest prio) down to zero. QEMU was doing the opposite. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
These registers share some of their fields. Writes to these fields should be visible through the corresponding mirror fields. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Edgar E. Iglesias 提交于
Introduce mips_cpu_map_tc() to map a global TC index into a VPE nr and local tc index. Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
- 04 9月, 2011 5 次提交
-
-
由 Blue Swirl 提交于
Add a new memory space for PCI instead of using system memory. This also fixes a bug where VGA region vga.chain4 is accidentally mapped to 0xa0000 instead of 0x1ff000a0000. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Avoid a crash if the guest combines FW_CFG_WRITE_CHANNEL with a wrong value. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Andreas Färber 提交于
Prepares for uint32 replacement. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Andreas Färber 提交于
Prepares for uint16 replacement. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Brad 提交于
Allow overriding the location of Samba's smbd. Pretty much every OS I look at has some means of changing this path (patching) so lets just make it easier for OS developers creating packages and/or end users to override the location. Signed-off-by: NBrad Smith <brad@comstyle.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 03 9月, 2011 2 次提交
-
-
由 Stefan Weil 提交于
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
A packed struct needs different gcc attributes for compilations with MinGW compilers because glib-2.0 adds compiler flag -mms-bitfields which modifies the packing algorithm. Attribute gcc_struct reverses the negative effects of -mms-bitfields. QEMU_PACKED sets this attribute and must be used for any packed struct which is affected by -mms-bitfields. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 02 9月, 2011 12 次提交
-
-
由 Frediano Ziglio 提交于
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Brad 提交于
Fix install(1) usage to be compatible with OpenBSD's install(1). When creating a directory via the -d flag the -p flag cannot be used at the same time. Also in the context of installing QEMU it doesn't make sense to use the -p flag anyway so use the [default] -c flag instead. Signed-off-by: NBrad Smith <brad@comstyle.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This has been discussed before in the past. The special casing really makes no sense anymore. This seems like a good change to make for 1.0. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Enabling the I/O thread by default seems like an important part of declaring 1.0. Besides allowing true SMP support with KVM, the I/O thread means that the TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which currently requires a (racey) signal based alarm system. I know there have been concerns about performance. I think so far the ones that have come up (virtio-net) are most likely due to secondary reasons like decreased batching. I think we ought to force enabling I/O thread early in 1.0 development and commit to resolving any lingering issues. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Reported-by: NLluis Vilanova <vilanova@ac.upc.edu> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Anthony Liguori 提交于
-
由 Stefan Hajnoczi 提交于
Avoid duplicate object files during the link. There are legitimate cases where a link command-line would include duplicate object files because two independent subsystems both depend on common infrastructure. Use GNU make's $(sort) function to remove duplicate object files from the link command-line. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This patch changes qemu_set_fd_handler to be implemented in terms of g_io_add_watch(). The semantics are a bit different so some glue is required. qemu_set_fd_handler2 is much harder to convert because of its use of polling. The glib main loop has the major of advantage of having a proven thread safe architecture. By using the glib main loop instead of our own, it will allow us to eventually introduce multiple I/O threads. I'm pretty sure that this will work on Win32, but I would appreciate some help testing. I think the semantics of g_io_channel_unix_new() are really just tied to the notion of a "unix fd" and not necessarily unix itself. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This allows GSources to be used to register callback events in QEMU. This is useful as it allows us to take greater advantage of glib and also because it allows us to write code that is more easily testable outside of QEMU since we can make use of glib's main loop in unit tests. All new code should use glib's callback mechanisms for registering fd events which are very well documented at: http://developer.gnome.org/glib/stable/glib-The-Main-Event-Loop.html And: http://developer.gnome.org/gio/stable/Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Peter Maydell 提交于
Move the declaration and initialisation of some variables in tcg_out_qemu_ld and tcg_out_qemu_st inside CONFIG_SOFTMMU, to avoid the "variable set but not used" warning of gcc 4.6. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 01 9月, 2011 7 次提交
-
-
由 Stefan Hajnoczi 提交于
The simpletrace.process() function invokes analyzer methods with the wrong number of arguments if a timestamp should be included. This patch fixes the issue so that trace analysis scripts can make use of timestamps. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Lluís 提交于
Given that all events with programmatically-controlled state are disabled by default, we can delete the "disable" property from all events. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Uses the generic interface provided in "trace/control.h" in order to provide a programmatic interface as well as command line and monitor controls. Signed-off-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Note that this refers to the backend-specific state (whether the output must be generated), not the event "disabled" property (which always uses the "nop" backend). Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Any event with the keyword/property "disable" generates an empty trace event using the "nop" backend, regardless of the current backend. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
The "-trace events" argument can be used to provide a file with a list of trace event names that will be enabled prior to starting execution, thus providing early tracing. This saves the user from manually toggling event states through the monitor interface or whichever backend-specific interface. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
The current interface is generic for this small set of operations, and thus other backends can easily modify the "trace/control.c" file to add their own implementation. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-