MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).

This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:

Undefined symbols for architecture x86_64:
  "_cur_mon", referenced from:
      _error_vprintf in libqemuutil.a(qemu-error.o)
      _error_printf in libqemuutil.a(qemu-error.o)
      _error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
      _error_print_loc in libqemuutil.a(qemu-error.o)
      _error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64

in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).

In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org

gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:

1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.

2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.

3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.

4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: NAndreas Färber <afaerber@suse.de>

I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.

The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.

Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,

I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.

v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor

v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes & improvements by kraxel:
 * baum build fix
 * remove text console logic
 * adapt to new input core
 * codestyle fixups
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: NQiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.

The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds.  It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:

* outlaw --enable-modules --static, which makes little sense anyway

* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.

Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).

The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: NVincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org

This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.

If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.

Use gnutls's SHA-256 to compare versions.

--enable-quorum must be used to enable the feature.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Adjust TMPO and added TMPB, TMPL, and TMPA.  libtool needs the names
to be fixed (TMPB).

Add new functions do_libtool and libtool_prog.

Add check for broken gcc and libtool.
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The converted block drivers are:

    curl
    iscsi
    rbd
    ssh
    glusterfs
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds loading, stamp checking and initialization of modules.

The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:

    qemu_stamp_$RELEASEHASH

where $RELEASEHASH is generated by hashing version strings and content
of configure script.

With this, modules built from a different tree/version/configure will
not be loaded.

The module loading code requires gmodule-2.0.

Modules are searched under
 - CONFIG_MODDIR
 - executable folder (to allow running qemu-{img,io} in the build
   directory)
 - ../ of executable folder (to allow running system emulator in the
   build directory)

Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
    $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add necessary rules and flags for shared object generation.
The new rules introduced here are:

1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.

2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:

    foo.mo-objs := bar.o baz.o qux.o

in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.

3) For all files ending up in %.so, the following is added automatically:

    foo.o-cflags += -fPIC -DBUILD_DSO

Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that.  Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.

This removes unwanted dependencies from libcacard.
Signed-off-by: NFam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:

    $(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)

Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.

The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NMohamad Gebai <mohamad.gebai@polymtl.ca>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:

>From the OpenBSD buildbots..
  Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC

Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.

Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.

NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[&param2=value2[&...]]]

For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2

You need LibNFS from Ronnie Sahlberg available at:
   git://github.com/sahlberg/libnfs.git
for this to work.

During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.

Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.

For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
   https://raw.github.com/sahlberg/libnfs/master/README

Supported by qemu are the uid, gid and tcp-syncnt URL parameters.

LibNFS currently support NFS version 3 only.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM:
 * added support for target disassembly
 * switched to custom QEMUDisassembler so the output format
   matches what QEMU expects
 * make sure we correctly fall back to "just print hex"
   if we didn't build the AArch64 disassembler because of
   lack of a C++ compiler
 * rename from 'aarch64' to 'arm-a64' because this is a
   disassembler for the A64 instruction set
 * merge aarch64.c and aarch64-cxx.cc into one C++ file
 * simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The help message uses $python and displays its value, so that macro
should be tested and set early.

With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.

The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:

@@ -8,7 +8,7 @@
   --interp-prefix=PREFIX   where to find shared libraries, etc.
                            use %M for cpu name [/usr/gnemul/qemu-%M]
   --target-list=LIST       set target list (default: build everything)
-                           Available targets:  alpha-softmmu arm-softmmu
+                           Available targets: alpha-softmmu arm-softmmu
                            cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
                            microblaze-softmmu microblazeel-softmmu mips-softmmu
                            mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.

libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: NVincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.

The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.

Fix this up.
Tested-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.

Thanks to Paul Smith for analyzing this bug for us.

Cc: qemu-stable@nongnu.org
Reported-by: NKen Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 1d984a67 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.

Now configure adds -B only if it is accepted by the Python interpreter.

This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.

As VHDX depends on uuid.h, VHDX is now a configurable build option.  If
VHDX support is enabled, that will also enable uuid as well.  The
default is to have VHDX enabled.

To enable/disable VHDX:  --enable-vhdx, --disable-vhdx
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.

Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.

Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NFam Zheng <famz@redhat.com>

This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist.  In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:

perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.

Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>