If TARGET_ABI_BITS is bigger than 32 we shift by more than the size of int.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

do_semop() is called from two places, and one of these fails to convert
return error to target errno when semop fails. This patch changes the
function to always return target errno in case of an unsuccessful call.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The alignment is a characteristic of the ABI, not the CPU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Reviewed-by: NPeter Maydell <peter.maydell@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Registers are 64-bit in size for the MIPS n32 ABI.  Define
target_elf_greg_t accordingly, and use the correct function
to do endian swaps.
Reviewed-by: NPeter Maydell <peter.maydell@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Some fields in core dumps are 32-bit in 32-or-64 environments (ppc64abi32,
sparc32plus).  Use abi_long/ulong for those.

Also, the fields of target_elf_siginfo are ints.  Use tswap32 to convert them.
Reviewed-by: NPeter Maydell <peter.maydell@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This change makes conversion of TARGET_O_NONBLOCK and TARGET_O_CLOEXEC flags
to host flags before calling eventfd for TARGET_NR_eventfd2.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Pass the 'last' parameter of print_signal() through to
print_raw_param(); this fixes a problem where we weren't printing
the comma separator for strace of rt_sigaction() when the signal
was an unnamed (ie realtime) one:
  6856 rt_sigaction(230xf6fff870,0xf6fff8fc) = 0
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The nature of the kernel ABI for the get_robust_list and set_robust_list
syscalls means we cannot implement them in QEMU. Make get_robust_list
silently return ENOSYS rather than using the default "print message and
then fail ENOSYS" code path, in the same way we already do for
set_robust_list, and add a comment documenting why we do this.

This silences warnings which were being produced for emulating
even trivial programs like 'ls' in x86-64-on-x86-64.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Implement the accept4 syscall (which is identical to accept
but has an additional flags argument).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Implement the sendfile and sendfile64 syscalls. This implementation
passes all the LTP test cases for these syscalls.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

If the guest passes us a bogus negative length for an iovec, fail
EINVAL rather than proceeding blindly forward. This fixes some of
the error cases tests for readv and writev in the LTP.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The linux-user usage message attempts to line up the columns in
its table by calculating the maximum width of any item in them.
However for the 'Argument' column it was only accounting for the
length of the option switch (eg "-d"), not the additional example
text (eg "item[,...]"). This currently has no adverse effects
because the widest item in the column happens to be the argumentless
"-singlestep" option, but improving the "-d" option help to read
"-d item[,...]" exceeds that limit.

Fix this by correctly calculating maxarglen as the width of the
first column text including a possible option argument, and
adjusting its uses to match.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NDillon Amburgey <dillona@dillona.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NDillon Amburgey <dillona@dillona.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Handle same as existing FUTEX_PRIVATE_FLAG.
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Upstream libc has recently changed to start using
FUTEX_WAIT_BITSET instead of FUTEX_WAIT and this
is causing do_futex to return -TARGET_ENOSYS.

Pass bitset in val3 to sys_futex which will be
ignored by kernel for the FUTEX_WAIT case.
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Without these, some networking programs will not work
Signed-off-by: NDillon Amburgey <dillona@dillona.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

N32 is a 64-bit cpu with a 32-bit address space.  We have
existing cpp defines for this situation, but weren't using them.

This does mean that the linux-user/mipsn32 directory must be
merged with the linux-user/mips64 directory, and differences
must be resolved via ifdefs.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Deleting these first makes the next patch much easier to read.
This doesn't cause any sort of compilation failure because we
have not yet enabled n32/n64 compilation.  This is dead code.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

GCC and GAS are capable of generating traps or breaks to check for
division by zero.  Additionally, GAS is capable of generating traps
or breaks to check for overflow on certain division and multiplication
operations.  The Linux kernel translates these traps and breaks into
signals.  This patch implements the corresponding feature in QEMU.
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.

This change requires us to:
 * update all the documentation/help text (we take the opportunity
   to smooth out minor inconsistencies between the phrasing in
   linux-user/bsd-user/system help messages)
 * make linux-user and bsd-user defer to qemu-log for the default
   logging destination rather than overriding it themselves
 * ensure that all logfile closing is done via qemu_log_close()
   and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Pass CPUState to cpu_exec_{start,end}() functions.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change gdbstub's cpu_index() argument to CPUState now that CPUArchState
is no longer used.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since
the qemu_log functionality is no longer restricted to TCG CPU
debug logging.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Abstract out the "print a human readable list of all the
valid log categories" functionality which is currently duplicated
in three separate places. (We leave the monitor.c help_cmd()
implementation as-is since it wants to send the message to
the monitor and add its own information.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The qemu_log() functionality is no longer specific to TCG CPU debug logs.
Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the
pointless wrapper set_cpu_log_filename().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It's worth to clean-up translation blocks variables and move them
into one context as was suggested by Swirl.
Also if we use this context directly inside tcg_ctx, then it
speeds up code generation a bit.
Signed-off-by: NEvgeny Voevodin <evgenyvoevodin@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 658f2dc9 accidentally dropped the cast to the target type of
the value loaded by get_user().  The most visible effect of this would
be that the sequence "uint64_t v; get_user_u32(v, addr)" would sign
extend the 32 bit loaded value into v rather than zero extending as
would be expected for a _u32 accessor.  Put the cast back again to
restore the old behaviour.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

CPUs are never added to the composition tree, so delete is achieved
simply by removing the last references to them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit 65dee380 (target-i386:
move cpu_reset and reset callback to cpu.c) the x86 CPU is reset through
cpu_init() but was still reset immediately after in linux-user and
bsd-user. Clean this up.

Similarly in linux-user/syscall.c it is also reset after cpu_copy().
But that's a bug of its own, fixing which poses a semantic change.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

According to man reboot(2), the 4th argument is only used with
LINUX_REBOOT_CMD_RESTART2. In other cases, trying to convert
the value can generate EFAULT.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

SO_SNDTIMEO and SO_RCVTIMEO take a struct timeval, not an int

To test this, you can use :

QEMU_STRACE= ping localhost 2>&1 |grep TIMEO
568 setsockopt(3,SOL_SOCKET,SO_SNDTIMEO,{1,0},8) = 0
568 setsockopt(3,SOL_SOCKET,SO_RCVTIMEO,{1,0},8) = 0
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>