When we migrate we ask the kernel about its current belief on what the guest
time would be. However, I've seen cases where the kvmclock guest structure
indicates a time more recent than the kvm returned time.

To make sure we never go backwards, calculate what the guest would have seen as time at the point of migration and use that value instead of the kernel returned one when it's more recent.
This bases the view of the kvmclock after migration on the
same foundation in host as well as guest.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Ensure proper env->tsc value for kvmclock_current_nsec calculation.
Reported-by: NMarcin Gibuła <m.gibula@beyond.pl>
Analyzed-by: NMarcin Gibuła <m.gibula@beyond.pl>
Cc: qemu-stable@nongnu.org
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce cpu_clean_all_dirty, to force subsequent cpu_synchronize_all_states
to read in-kernel register state.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_pit is running in kmod. kvm_pit is going to inject
interrupt to vm before cpu_synchronize_all_post_init at
dest side. vcpu will lose the pit interrupt, but
ack_irq(in kmod) has been 0. ack_irq become 1 after
vcpu responds pit interrupt. pit interruptcan inject
to vm when ack_irq is 1.

By the way, kvm_pit_vm_state_change has save and load
state of pit, so pre_save and post_load is unnecessary.
Signed-off-by: NChenLiang <chenliang88@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

* remotes/qmp-unstable/queue/qmp:
  exec: file_ram_alloc(): print error when prealloc fails
  monitor: fix debug print compiling error
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Fri 12 Sep 2014 16:09:43 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (22 commits)
  qcow2: Add falloc and full preallocation option
  raw-posix: Add falloc and full preallocation option
  qapi: introduce PreallocMode and new PreallocModes full and falloc.
  block: don't convert file size to sector size
  block: round up file size to nearest sector
  iotests: Send the correct fd in socket_scm_helper
  blockdev: Refuse to drive_del something added with blockdev-add
  block: extend BLOCK_IO_ERROR with reason string
  dataplane: fix virtio_blk_data_plane_create() op blocker error path
  qemu-iotests: Run 025 for Archipelago block driver
  block/archipelago: Implement bdrv_truncate()
  block: Make the block accounting functions operate on BlockAcctStats
  block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
  block: Extract the block accounting code
  block: Extract the BlockAcctStats structure
  IDE: MMIO IDE device control should be little endian
  thread-pool: Drop unnecessary includes
  xen: Drop redundant bdrv_close() from pci_piix3_xen_ide_unplug()
  xen_disk: Plug memory leak on error path
  qemu-io: Clean up openfile() after commit 2e40134b
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix pixman build failure.

# gpg: Signature made Mon 15 Sep 2014 07:15:11 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-console-20140915-1:
  configure: check for pixman-1 version
  pixman: update internal copy to pixman-0.32.6
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:

qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)

This patch fixes the problem by checking the pixman version.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. Although commit f27b2e1d bumped pixman to pixman-0.28.2,
but the change was reverted later by 7b1b5d19.

This patch updates internal copy of pixman to pixman-0.32.6 to fix the
problem.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.

# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (21 commits)
  gdbstub: init mon_chr through qemu_chr_alloc
  pckbd: adding new fields to vmstate
  mc146818rtc: add missed field to vmstate
  piix: do not set irq while loading vmstate
  serial: fixing vmstate for save/restore
  parallel: adding vmstate for save/restore
  fdc: adding vmstate for save/restore
  cpu: init vmstate for ticks and clock offset
  apic_common: vapic_paddr synchronization fix
  vl: use QLIST_FOREACH_SAFE to visit change state handlers
  exec: add parameter errp to gethugepagesize
  exec: report error when memory < hpagesize
  hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
  memory: add parameter errp to memory_region_init_rom_device
  memory: add parameter errp to memory_region_init_ram
  exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
  rules.mak: Fix DSO build by pulling in archive symbols
  util: Don't link host-utils.o if it's empty
  util: Move general qemu_getauxval to util/getauxval.c
  trace: Only link generated-tracers.o with "simple" backend
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If memory allocation fails when using the -mem-prealloc command-line
option, QEMU exits without printing any error information to
the user:

 # qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
 # echo $?
 1

This commit adds an error message, so that we print instead:

 # qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
 qemu: unable to map backing store for hugepages: Cannot allocate memory
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

error: 'i' undeclared (first use in this function)
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

target-arm:
 * add "linux,stdout-path" to the virt DTB
 * fix a long standing bug with IRQ disabling on Cortex-M CPUs
 * implement input interrupt logic in the PL061
 * fix failure to load correct SP/PC on reset of Cortex-M CPUs
   if the vector table is not in a ROM-blob-in-RAM
 * provide flash devices for boot ROMs in the virt board
 * implement architectural watchpoints
 * fix misimplementation of Inner Shareable TLB operations that
   caused instability of guests in TCG SMP configurations
 * configure PL011 and PL031 in the virt board correctly with
   level-triggered interrupts rather than edge-triggered
 * support providing a device tree blob to ROM (firmware)
   images as well as to kernels

# gpg: Signature made Fri 12 Sep 2014 14:19:08 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140912: (23 commits)
  hw/arm/boot: enable DTB support when booting ELF images
  hw/arm/boot: load device tree to base of DRAM if no -kernel option was passed
  hw/arm/boot: pass an address limit to and return size from load_dtb()
  hw/arm/boot: load DTB as a ROM image
  hw/arm/virt: fix pl011 and pl031 irq flags
  target-arm: Make *IS TLB maintenance ops affect all CPUs
  target-arm: Push legacy wildcard TLB ops back into v6
  target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0
  target-arm: Remove comment about MDSCR_EL1 being dummy implementation
  target-arm: Set DBGDSCR.MOE for debug exceptions taken to AArch32
  target-arm: Implement handling of fired watchpoints
  target-arm: Move extended_addresses_enabled() to internals.h
  target-arm: Implement setting of watchpoints
  cpu-exec: Make debug_excp_handler a QOM CPU method
  exec.c: Record watchpoint fault address and direction
  exec.c: Provide full set of dummy wp remove functions in user-mode
  exec.c: Relax restrictions on watchpoint length and alignment
  hw/arm/virt: Provide flash devices for boot ROMs
  target-arm: Fix broken indentation in arm_cpu_reest()
  target-arm: Fix resetting issues on ARMv7-M CPUs
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch prepares for the subsequent patches.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

and avoid converting it back later.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.

This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support for loading DTB images when booting ELF images using
-kernel. If there are no conflicts with the placement of the ELF
segments, the DTB image is loaded at the base of RAM.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If we are running the 'virt' machine, we may have a device tree blob but no
kernel to supply it to if no -kernel option was passed. In that case, copy it
to the base of RAM where it can be picked up by a bootloader.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an address limit input parameter to load_dtb() so that we can
tell load_dtb() how much memory the dtb is allowed to consume. If
the dtb doesn't fit, return 0, otherwise return the actual size of
the loaded dtb.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-3-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In order to make the device tree blob (DTB) available in memory not only at
first boot, but also after system reset, use rom_blob_add_fixed() to install
it into memory.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pl011 and pl031 devices both use level triggered interrupts,
but the device tree we construct was incorrectly telling the
kernel to configure the GIC to treat them as edge triggered.
This meant that output from the pl011 would hang after a while.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274423-9461-1-git-send-email-peter.maydell@linaro.org
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org

The ARM architecture defines that the "IS" variants of TLB
maintenance operations must affect all TLBs in the Inner Shareable
domain, which for us means all CPUs. We were incorrectly implementing
these to only affect the current CPU, which meant that SMP TCG
operation was unstable.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-3-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

When we implemented ARMv8 in QEMU we retained our legacy loose
wildcarded decoding of the TLB maintenance operations for v7
and earlier CPUs and provided the correct stricter decode for
v8. However the loose decode is in fact wrong for v7MP, because
it doesn't correctly implement the operations which must apply
to every CPU in the Inner Shareable domain.

Move the legacy wildcarding from the not_v8 reginfo array
into the not_v7 array, and move the strictly decoded operations
from the v8 reginfo to v7 or v7mp arrays as appropriate.

Cache and TLB lockdown legacy wildcarding remains in the
not_v8 array for the moment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

Implement debug registers DBGVCR, OSDLR_EL1 and MDCCSR_EL0
(as dummy or limited-functionality). 32 bit Linux kernels will
access these at startup so they are required for breakpoints
and watchpoints to be supported.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MDSCR_EL1 has actual functionality now; remove the out of date
comment that claims it is a dummy implementation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For debug exceptions taken to AArch32 we have to set the
DBGDSCR.MOE (Method Of Entry) bits; we can identify the
kind of debug exception from the information in
exception.syndrome.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the ARM debug exception handler for dealing with
fired watchpoints.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the utility function extended_addresses_enabled() into
internals.h; we're going to need to call it from op_helper.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement support for setting QEMU watchpoints based on the
values the guest writes to the ARM architected watchpoint
registers. (We do not yet report the firing of the watchpoints
to the guest, so they will just be ignored.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the debug_excp_handler target specific hook into a QOM
CPU method.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When we check whether we've hit a watchpoint we know the address
that we were attempting to access and whether it was a read or a
write. Record this information in the CPUWatchpoint struct so that
target-specific code can report it to the guest.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

We already provide dummy versions of the cpu_watchpoint_insert
and cpu_watchpoint_remove_all functions when CONFIG_USER_ONLY
is defined. Complete the set by providing cpu_watchpoint_remove
and cpu_watchpoint_remove_by_ref as well.

This allows target-* code using these functions to avoid
some ifdeffery.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add two flash devices to the virt board, so that it can be used for
running guests which want a bootrom image such as UEFI. We provide
two flash devices to make it more convenient to provide both a
read-only UEFI image and a read-write place to store guest-set
UEFI config variables. The '-bios' command line option is set up
to provide an image for the first of the two flash devices.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1409930126-28449-2-git-send-email-ard.biesheuvel@linaro.org

Fix a single misindented line in arm_cpu_reset().
Signed-off-by: NMartin Galvan <martin.galvan@tallertechnologies.com>
[PMM: split this out from the previous commit]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When calling qemu_system_reset after startup on a Cortex-M
CPU, the initial values of PC, MSP and the Thumb bit weren't being set
correctly if the vector table was in ROM. In particular, since Thumb was 0, a
Usage Fault would arise immediately after trying to execute any instruction
on a Cortex-M.
Signed-off-by: NMartin Galvan <martin.galvan@tallertechnologies.com>
Message-id: CAOKbPbaLt-LJsAKkQdOE0cs9Xx4OWrUfpDhATXPSdtuNw2xu_A@mail.gmail.com
[PMM: removed an incorrect comment]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds the missing input interrupt logic to the pl061 GPIO device. To
keep the floating output pins to stay high, the old state variable had to be
split into two separate ones for input and output - which brings the vmstate
version to 3.

Edge level interrupts and I/O were tested under Linux 3.14. Level interrupt
handling hasn't been tested.
Signed-off-by: NColin Leitner <colin.leitner@googlemail.com>
Message-id: 54024FD2.9080204@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Correct an error in the logic for deciding whether we can
take an IRQ interrupt which meant that on M profile cores
it was never possible to disable them.

The design here is still bogus in that M profile doesn't
have separate "IRQ" and "FIQ", which are an A/R profile
concept; we should ideally implement the proper priority
based scheme.
Signed-off-by: NDavid Hoover <spm@boiteauxlettres.sent.at>
[PMM: Wrote a proper commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>