The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.

This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).

Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com

[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target-arm queue:
 * target/arm: Fix address truncation in 64-bit pagetable walks
 * i.MX: Fix FEC/ENET receive functions
 * target/arm: preparatory refactoring for SVE emulation
 * hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
 * hw/intc/arm_gic: Fix C_RPR value on idle priority
 * hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
 * hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
 * hw/arm/virt: Check that the CPU realize method succeeded
 * sdhci: fix a NULL pointer dereference due to uninitialized AddressSpace object
 * xilinx_spips: Correct usage of an uninitialized local variable
 * pl110: Implement vertical compare/next base interrupts

# gpg: Signature made Thu 25 Jan 2018 12:59:25 GMT
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180125: (21 commits)
  pl110: Implement vertical compare/next base interrupts
  xilinx_spips: Correct usage of an uninitialized local variable
  sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace object
  hw/arm/virt: Check that the CPU realize method succeeded
  hw/intc/arm_gic: Fix the NS view of C_BPR when C_CTRL.CBPR is 1
  hw/intc/arm_gic: Fix group priority computation for group 1 IRQs
  hw/intc/arm_gic: Fix C_RPR value on idle priority
  hw/intc/arm_gic: Prevent the GIC from signaling an IRQ when it's "active and pending"
  target/arm: Simplify fp_exception_el for user-only
  target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
  target/arm: Move cpu_get_tb_cpu_state out of line
  target/arm: Add ARM_FEATURE_SVE
  vmstate: Add VMSTATE_UINT64_SUB_ARRAY
  target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
  target/arm: Change the type of vfp.regs
  target/arm: Use pointers in neon tbl helper
  target/arm: Use pointers in neon zip/uzp helpers
  target/arm: Use pointers in crypto helpers
  target/arm: Mark disas_set_insn_syndrome inline
  i.MX: Fix FEC/ENET receive funtions
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qemu-sparc update

# gpg: Signature made Thu 25 Jan 2018 13:44:58 GMT
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-signed:
  sun4u: implement power device
  sparc64: convert hw/sparc64/sparc64.c from DPRINTF macros to trace events
  sabre: convert from SABRE_DPRINTF macro to trace-events
  apb: rename apb.c to sabre.c
  sun4u: rename apb variables and constants
  apb: rename QOM type from TYPE_APB to TYPE_SABRE
  apb: QOMify sabre PCI host bridge
  apb: change pbm_pci_host prefix functions to use sabre_pci prefix
  apb: rename APB functions to use sabre prefix
  simba: rename PBMPCIBridge and QOM types to reflect simba naming
  apb: split simba PCI bridge into hw/pci-bridge/simba.c
  sparc/leon3 irqmp: fix IRQ software ack
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: fix for CVE-2018-5683

# gpg: Signature made Thu 25 Jan 2018 09:33:23 GMT
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180125-pull-request:
  vga: check the validation of memory addr when draw text
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This inbuilt device contains a single 4-byte register, of which bit 24 is used
to power down the machine on a real Ultra 5.

The power device exists at offset 0x724000 on a real machine, but due to the
current configuration of the BARs in QEMU it must be located lower in PCI IO
space.

For the moment we place the power device at offset 0x7240 as a reminder of its
original location and raise the base PCI IO address from 0x4000 to 0x8000.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NArtyom Tarasenko <atar4qemu@gmail.com>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

This implements rudimentary support for interrupt generation on the
PL110. I am working on a new DRI/KMS driver for Linux and since that
uses the blanking interrupt, we need something to fire here. Without
any interrupt support Linux waits for a while and then gives ugly
messages about the vblank not working in the console (it does not
hang perpetually or anything though, DRI is pretty forgiving).

I solved it for now by setting up a timer to fire at 60Hz and pull
the interrupts for "vertical compare" and "next memory base"
at this interval. This works fine and fires roughly the same number
of IRQs on QEMU as on the hardware and leaves the console clean
and nice.

People who want to create more accurate emulation can probably work
on top of this if need be. It is certainly closer to the hardware
behaviour than what we have today anyway.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Message-id: 20180123225654.5764-1-linus.walleij@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: folded long lines]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Coverity found that the variable tx_rx in the function
xilinx_spips_flush_txfifo was being used uninitialized (CID 1383841). This
patch corrects this by always initializing tx_rx to zeros.
Signed-off-by: NFrancisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 20180124215708.30400-1-frasse.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

missed in 60765b6c.

  Thread 1 "qemu-system-aarch64" received signal SIGSEGV, Segmentation fault.
  address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050
  3050	    as->root = root;
  (gdb) bt
  #0  address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050
  #1  0x0000555555af62c3 in sdhci_sysbus_realize (dev=<optimized out>, errp=0x7fff7f931150) at hw/sd/sdhci.c:1564
  #2  0x00005555558b25e5 in zynqmp_sdhci_realize (dev=0x555557051520, errp=0x7fff7f931150) at hw/sd/zynqmp-sdhci.c:151
  #3  0x0000555555a2e7f3 in device_set_realized (obj=0x555557051520, value=<optimized out>, errp=0x7fff7f931270) at hw/core/qdev.c:966
  #4  0x0000555555ba3f74 in property_set_bool (obj=0x555557051520, v=<optimized out>, name=<optimized out>, opaque=0x555556e04a20,
      errp=0x7fff7f931270) at qom/object.c:1906
  #5  0x0000555555ba51f4 in object_property_set (obj=obj@entry=0x555557051520, v=v@entry=0x5555576dbd60,
      name=name@entry=0x555555dd6306 "realized", errp=errp@entry=0x7fff7f931270) at qom/object.c:1102
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180123132051.24448-1-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We were passing a NULL error pointer to the object_property_set_bool()
call that realizes the CPU object. This meant that we wouldn't detect
failure, and would plough blindly on to crash later trying to use a
NULL CPU object pointer. Detect errors and fail instead.

In particular, this will be necessary to detect the user error
of using "-cpu host" without "-enable-kvm" once we make the host
CPU type be registered unconditionally rather than only in
kvm_arch_init().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When C_CTRL.CBPR is 1, the Non-Secure view of C_BPR is altered:
  - A Non-Secure read of C_BPR should return the BPR value plus 1,
  saturated to 7,
  - A Non-Secure write should be ignored.
Signed-off-by: NLuc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-6-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment typo]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When determining the group priority of a group 1 IRQ, if C_CTRL.CBPR is
0, the non-secure BPR value is used. However, this value must be
incremented by one so that it matches the secure world number of
implemented priority bits (NS world has one less priority bit compared
to the Secure world).
Signed-off-by: NLuc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-5-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: add assert, as the gicv3 code has]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When there is no active interrupts in the GIC, a read to the C_RPR
register should return the value of the "Idle priority", which is either
the maximum value an IRQ priority field can be set to, or 0xff.

Since the QEMU GIC model implements all the 8 priority bits, the Idle
priority is 0xff.

Internally, when there is no active interrupt, the running priority
value is 0x100. The gic_get_running_priority function returns an uint8_t
and thus, truncate this value to 0x00 when returning it. This is wrong since
a value of 0x00 correspond to the maximum possible priority.

This commit fixes the returned value when the internal value is 0x100.

Note that it is correct for the Non-Secure view to return 0xff even
though from the NS world point of view, only 7 priority bits are
implemented. The specification states that the Idle priority can be 0xff
even when not all the 8 priority bits are implemented. This has been
verified against a real GICv2 hardware on a Xilinx ZynqMP based board.

Regarding the ARM11MPCore version of the GIC, the specification is not
clear on that point, so this commit does not alter its behavior.
Signed-off-by: NLuc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-4-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the GIC, when an IRQ is acknowledged, its state goes from "pending"
to:
   - "active" if the corresponding IRQ pin has been de-asserted
   - "active and pending" otherwise.
The GICv2 manual states that when a IRQ becomes active (or active and
pending), the GIC should either signal another (higher priority) IRQ to
the CPU if there is one, or de-assert the CPU IRQ pin.

The current implementation of the GIC in QEMU does not check if the
IRQ is already active when looking for pending interrupts with
sufficient priority in gic_update(). This can lead to signaling an
interrupt that is already active.

This usually happens when splitting priority drop and interrupt
deactivation. On priority drop, the IRQ stays active until deactivation.
If it becomes pending again, chances are that it will be incorrectly
selected as best_irq in gic_update().

This commit fixes this by checking if the IRQ is not already active when
looking for best_irq in gic_update().

Note that regarding the ARM11MPCore GIC version, the corresponding
manual is not clear on that point, but it has has no priority
drop/interrupt deactivation separation, so this case should not happen.
Signed-off-by: NLuc MICHEL <luc.michel@git.antfield.fr>
Message-id: 20180119145756.7629-3-luc.michel@greensocs.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-16-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-15-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-14-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Not enabled anywhere so far.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-11-richard.henderson@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

At the same time, move VMSTATE_UINT32_SUB_ARRAY
beside the other UINT32 definitions.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-8-richard.henderson@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Helpers that return a pointer into env->vfp.regs so that we isolate
the logic of how to index the regs array for different cpu modes.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-7-richard.henderson@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All direct users of this field want an integral value.  Drop all
of the extra casting between uint64_t and float64.
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-6-richard.henderson@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rather than passing a regno to the helper, pass pointers to the
vector register directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-5-richard.henderson@linaro.org
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rather than passing regnos to the helpers, pass pointers to the
vector registers directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-4-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rather than passing regnos to the helpers, pass pointers to the
vector registers directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-3-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If it isn't used when translate.h is included,
we'll get a compiler Werror.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-2-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The actual imx_eth_enable_rx() function is buggy.

It updates s->regs[ENET_RDAR] after calling qemu_flush_queued_packets().

qemu_flush_queued_packets() is going to call imx_XXX_receive() which itself
is going to call imx_eth_enable_rx().

By updating s->regs[ENET_RDAR] after calling qemu_flush_queued_packets()
we end up updating the register with an outdated value which might
lead to disabling the receive function in the i.MX FEC/ENET device.

This patch change the place where the register update is done so that the
register value stays up to date and the receive function can keep
running.
Reported-by: NFyleo <fyleo45@gmail.com>
Tested-by: NFyleo  <fyleo45@gmail.com>
Signed-off-by: NJean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20180113113445.2705-1-jcd@tribudubois.net
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit ("3b39d734 target/arm: Handle page table walk load failures
correctly") modified both versions of the page table walking code (i.e.,
arm_ldl_ptw and arm_ldq_ptw) to record the result of the translation in
a temporary 'data' variable so that it can be inspected before being
returned. However, arm_ldq_ptw() returns an uint64_t, and using a
temporary uint32_t variable truncates the upper bits, corrupting the
result. This causes problems when using more than 4 GB of memory in
a TCG guest. So use a uint64_t instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20180119194648.25501-1-ard.biesheuvel@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue 23 Jan 2018 14:47:41 GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-2.12-pull-request:
  linux-user: implement renameat2
  page_unprotect(): handle calls to pages that are PAGE_WRITE
  linux-user: Propagate siginfo_t through to handle_cpu_signal()
  linux-user: remove nmi.c and fw-path-provider.c
  linux-user: Add getcpu() support
  linux-user: Add AT_SECURE auxval
  linux-user: Fix sched_get/setaffinity conversion
  linux-user/mmap.c: Avoid choosing NULL as start address
  linux-user: Translate flags argument to dup3 syscall
  linux-user: Don't use CMSG_ALIGN(sizeof struct cmsghdr)
  linux-user: Fix length calculations in host_to_target_cmsg()
  linux-user: wrap fork() in a start/end exclusive section
  linux-user: Fix locking order in fork_start()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Start a vm with qemu-kvm -enable-kvm -vnc :66 -smp 1 -m 1024 -hda
redhat_5.11.qcow2  -device pcnet -vga cirrus,
then use VNC client to connect to VM, and excute the code below in guest
OS will lead to qemu crash:

int main()
 {
    iopl(3);
    srand(time(NULL));
    int a,b;
    while(1){
	a = rand()%0x100;
	b = 0x3c0 + (rand()%0x20);
        outb(a,b);
    }
    return 0;
}

The above code is writing the registers of VGA randomly.
We can write VGA CRT controller registers index 0x0C or 0x0D
(which is the start address register) to modify the
the display memory address of the upper left pixel
or character of the screen. The address may be out of the
range of vga ram. So we should check the validation of memory address
when reading or writing it to avoid segfault.
Signed-off-by: Nlinzhecheng <linzhecheng@huawei.com>
Message-id: 20180111132724.13744-1-linzhecheng@huawei.com
Fixes: CVE-2018-5683
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Block layer patches

# gpg: Signature made Tue 23 Jan 2018 12:38:36 GMT
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (29 commits)
  iotests: Disable some tests for compat=0.10
  iotests: Split 177 into two parts for compat=0.10
  iotests: Make 059 pass on machines with little RAM
  iotests: Filter compat-dependent info in 198
  iotests: Make 191 work with qcow2 options
  iotests: Make 184 image-less
  iotests: Make 089 compatible with compat=0.10
  iotests: Fix 067 for compat=0.10
  iotests: Fix 059's reference output
  iotests: Fix 051 for compat=0.10
  iotests: Fix 020 for vmdk
  iotests: Skip 103 for refcount_bits=1
  iotests: Forbid 020 for non-file protocols
  iotests: Drop format-specific in _filter_img_info
  iotests: Fix _img_info for backslashes
  block/vmdk: Add blkdebug events
  block/qcow: Add blkdebug events
  qcow2: No persistent dirty bitmaps for compat=0.10
  block/vmdk: Fix , instead of ; at end of line
  qemu-iotests: Fix locking issue in 102
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio: quick fix

Fixes a regression in virtio that's causing issues
for many people.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 24 Jan 2018 17:20:24 GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  Revert "qemu: add a cleanup callback function to EventNotifier"
  Revert "virtio: postpone the execution of event_notifier_cleanup function"
  Revert "virtio: improve virtio devices initialization time"
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>
[for addition of trace-events to hw/pci-host]
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

This is the final stage in correcting the naming convention with respect to
sabre, APB and PBM. It is effectively a file rename from apb.c to sabre.c
along with touching up a few constants to remove the remaining references
to APB.

Note that as part of the rename process the configuration variable
CONFIG_PCI_APB is changed to CONFIG_PCI_SABRE.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

In order to reflect the previous change of TYPE_APB to TYPE_SABRE, update
the corresponding variable names to keep the terminology consistent.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

Similarly rename the corresponding APBState typedef to SabreState.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

This is the proper name for the PBM host bridge as referenced in the Sun
documentation.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

As hinted in the comment at the top of the file, the naming convention for the
APB types/QOM functions isn't correct. As a starting point we can at least
rename the APB type and related functions to improve the readability of apb.c.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

Here we rename PBMPCIBridge to SimbaPCIBridge and the QOM type from
TYPE_PBM_PCI_BRIDGE to TYPE_SIMBA_PCI_BRIDGE in improve the clarity
of the device name.

Also touch up the relevant spots in apb.c and various other function
names as appropriate.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>

Move the QOM type and macros into a new include/hw/pci-bridge/simba.h
file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled
for sparc64-softmmu builds only.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: NArtyom Tarasenko <atar4qemu@gmail.com>