"--enable-debug-info" and "--disable-debug-info" were not shown
in --help output.
Signed-off-by: NDunrong Huang <huangdr@cloud-times.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Now that the core takes care of fe_open tracking we no longer need this hack.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-12-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When migrating a host with with a spice agent running the mouse becomes
non operational after the migration due to the agent state being
inconsistent between the guest and the client.

After migration the spicevmc backend on the destination has never been notified
of the (non 0) guest_connected state. Virtio-serial holds this state
information and migrates it, this patch properly propagates this information
to virtio-console and through that to interested chardev backends.

rhbz #725965
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-11-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-10-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Resending the be_open event only is useful when a frontend is registering, not
when it is unregistering.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-9-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The decrement of avail_connections is done in qdev-properties-system move
the increment there too for proper balancing of the calls.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-8-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-7-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-6-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Most frontends can't really determine if the guest actually has the frontend
side open. So lets automatically generate fe_open / fe_close as soon as a
frontend becomes ready (as signalled by calling qemu_chr_add_handlers) /
becomes non ready (as signalled by setting all handlers to NULL).

And allow frontends which can actually determine if the guest is listening to
opt-out of this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-5-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add tracking of the fe_open state to struct CharDriverState.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-4-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To better reflect that it is for handling a backend being opened.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-3-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Rename the opened variable to be_open to reflect that it contains the
opened state of the backend.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-2-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

GCC 4.8.0 introduces a new warning:

    block/qcow2-snapshot.c: In function 'qcow2_write_snapshots’:
    block/qcow2-snapshot.c:252:18: error: typedef 'qemu_build_bug_on__253'
              locally defined but not used [-Werror=unused-local-typedefs]
         QEMU_BUILD_BUG_ON(offsetof(QCowHeader, snapshots_offset) !=
                  ^
    cc1: all warnings being treated as errors

(Caret diagnostics aren't perfect yet with macros... :)) Work around it
with __attribute__((unused)).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1364391272-1128-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

virtio,pci,qom

Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Alex Williamson (13) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (23 commits)
  pcie: Add endpoint capability initialization wrapper
  roms: switch oldnoconfig to olddefconfig
  pcie: Mangle types to match topology
  pci: Create and use API to determine root buses
  pci: Create pci_bus_is_express helper
  pci: Q35, Root Ports, and Switches create PCI Express buses
  pci: Allow PCI bus creation interfaces to specify the type of bus
  pci: Move PCI and PCIE type defines
  pci: Create and register a new PCI Express TypeInfo
  exec: assert that RAMBlock size is non-zero
  pci: refuse empty ROM files
  pci_bridge: Remove duplicate IRQ swizzle function
  pci_bridge: Use a default map_irq function
  pci: Fix INTx routing notifier recursion
  pci_bridge: drop formatting from source
  pci_bridge: factor out common code
  pci: Teach PCI Bridges about VGA routing
  pci: Add PCI VGA helpers
  virtio-pci: guest notifier mask without non-irqfd
  virtio-net: remove layout assumptions for mq ctrl
  ...

Fix the awkward API of mangling the caller specified PCIe type and
just provide an interface to initialize an endpoint device.  This
will pick either a regular endpoint or integrated endpoint based on
the bus and return pcie_cap_init to doing exactly what is asked.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When a new option is added that qemu does not know
about, the prudent thing is to use the default not
force it to "no".
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Windows will fail to start drivers for devices with an Endpoint type
PCIe capability attached to a Root Complex (code 10 - Device cannot
start).  The proper type for such a device is Root Complex Integrated
Endpoint.  Devices don't care which they are, so do this conversion
automatically.

This allows the Windows driver to load for nec-usb-xhci when attached
to pcie.0 of a q35 machine.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For testing the bus type.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Convert q35, ioh3420, xio3130_upstream, and xio3130_downstream to
use the new TYPE_PCIE_BUS.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

No change to any types.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move these so that we can reference them from a more common header
instead of including pci_bus.h everywhere.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This will allow us to differentiate Express and Legacy buses.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

find_ram_offset() does not handle size=0 gracefully.  It hands out the
same RAMBlock offset multiple times, leading to obscure failures later
on.

Add an assert to warn early if something is incorrectly allocating a
zero size RAMBlock.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

A zero size ROM file is invalid and should produce a warning.
Attempting to use a zero size file ends up hitting an assertion
qemu_ram_set_idstr() because RAMBlocks with duplicate addresses are
allocated - due to zero size the allocator doesn't increment the next
available RAMBlock offset.

Also convert __FUNCTION__ to __func__ while we're touching this code.
There are no other __FUNCTION__ instances in pci.c anymore.
Reported-by: NMilos Ivanovic <milosivanovic@orcon.net.nz>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pci_bridge_dev_map_irq_fn() is identical to pci_swizzle_map_irq_fn(),
which is now the default for all PCI bridges.  We can therefore remove
this function and the pci_bridge_map_irq() call that used it.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The PCI bridge spec defines a default swizzle for translating INTx
IRQs from secondary bus to primary.  Use this by default for any
bridge that doesn't set a function.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For some reason we recurse to fire the INTx routing notifier for each
child of a bus, for each possible device of a bus.  That means that if
we add a root port, the notifier gets called for that bridge 256
times.  If we add an upstream switch behind that root port, 256^2.  But
of course we need a downstream switch, 256^3.  This starts to be
noticeable.  Stop the insanity.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We use the same formatting for all files, it
doesn't make sense to have formatting directives only
in pci bridge header.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reuse common code in pcie_port, override the hardwired-to-0
bits per PCI Express spec.
No functional change but makes the code easier to follow.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Each PCI Bridge has a set of implied VGA regions that are enabled when
the VGA bit is set in the bridge control register.  This allows VGA
devices behind bridges.  Unfortunately with VGA Enable, which we
formerly allowed but didn't back, comes along some required VGA
baggage.  VGA Palette Snooping is required, along with VGA 16-bit
decoding.  We don't yet have support for palette snooping.
We also don't have support for 10-bit VGA aliases, the default mode, but
we enable the register, even on root ports, to avoid confusing guests.
Fortunately there's likely nothing from this century that requires these
features, so the missing bits are noted with TODOs.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Allow devices to register VGA memory regions for handling PCI spec
defined VGA I/O port and MMIO areas.  PCI will attach these to the
bus address spaces and enable them according to the device command
register value.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

non-irqfd setups are currently broken with vhost:
we start up masked and nothing unmasks the interrupts.
Fix by using mask notifiers, same as the irqfd path.

Sharing irqchip/non irqchip code is always a good thing,
in this case it will help non irqchip benefit
from backend masking optimization.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Following commit 921ac5d0 (virtio-net:
remove layout assumptions for ctrl vq), this patch makes multiqueue ctrl
handling not rely on the layout of descriptors.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add QOM path to device deleted event.  It now becomes useful to report
it for devices which don't have an ID assigned.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It seems more logical to have destruction flow start with the subclass
and move up to the base class.  This ensures object has a valid
canonical path when destructor is called.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
  Use qemu_put_buffer_async for guest memory pages
  Add qemu_put_buffer_async
  Use writev ops if available
  Store the data to send also in iovec
  Update bytes_xfer in qemu_put_byte
  Add socket_writev_buffer function
  Add QemuFileWritevBuffer QemuFileOps
  migration: use XBZRLE only after bulk stage
  migration: do not search dirty pages in bulk stage
  migration: do not sent zero pages in bulk stage
  migration: add an indicator for bulk state of ram migration
  migration: search for zero instead of dup pages
  bitops: unroll while loop in find_next_bit()
  buffer_is_zero: use vector optimizations if possible
  cutils: add a function to find non-zero content in a buffer
  move vector definitions to qemu-common.h
  savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
  savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
  savevm: Add VMSTATE_FLOAT64 helpers
  savevm: Add VMSTATE_UINTTL_EQUAL helper
  ...

# By Cornelia Huck
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
  virtio-ccw: Queue sanity check for notify hypercall.

Verify that the virtio-ccw notify hypercall passed a reasonable
value for queue.

Cc: qemu-stable@nongnu.org
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Peter reported that rtc-test would periodically hang.  It turns out
this was due to an EAGAIN occurring on qemu_chr_fe_write.

Instead of heavily refactoring qtest, just use a synchronous version
of the write operation for qemu_chr_fe_write to address this problem.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>