Add a useless virtio SCSI HBA device:

  qemu -device virtio-scsi-pci
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Scatter/gather functionality uses the newly added DMA helpers.  The
device can choose between doing DMA itself, or calling scsi_req_data
as usual, which will use the newly added DMA helpers to copy piecewise
to/from the destination area(s).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

With the upcoming sglist support, HBAs will not see any transfer_data
call and will not have a way to detect short transfers.  So pass the
residual amount of data upon command completion.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The length of the transfer is already in the sglist, the wrapper simply
fetches it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These helpers do a full transfer from an in-memory buffer to target
memory, with support for scatter/gather lists.  It will be used to
store the reply of an emulated command into a QEMUSGList provided by
the adapter.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

scsi-disk will manage scatter/gather list, but it does not create
single entries so it remains target-independent.  Make QEMUSGList
available to it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Trying to interact with a stopped guest will queue up the events,
then send them all at once when the guest continues running, with
a high chance to have them cause unwanted actions.

Avoid that by only injecting the input events only when the guest
is in running state.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When an input line is handled as level-triggered, it will immediately
raise an IRQ on the output of a PIC again that goes through an init
reset. So only clear the edge-triggered inputs from IRR in that
scenario.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead of providing 4 individual query functions for mode, gate, output
and initial counter state, introduce a service that queries all
information at once. This comes with tiny additional costs for
pcspk_callback but with a much cleaner interface. Also, it will simplify
the implementation of the KVM in-kernel PIT model.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert the PC speaker device to a qdev ISA model. Move the public
interface to a dedicated header file at this chance.

CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When the HPET enters legacy mode, the IRQ output of the PIT is
suppressed and replaced by the HPET timer 0. But the current code to
emulate this was broken in many ways. It reset the PIT state after
re-enabling, it worked against a stale static PIT structure, and it did
not properly saved/restored the IRQ output mask in the PIT vmstate.

This patch solves the PIT IRQ control in a different way. On x86, it
both redirects the PIT IRQ to the HPET, just like the RTC. But it also
keeps the control line from the HPET to the PIT. This allows to disable
the PIT QEMU timer when it is not needed. The PIT's view on the control
line state is now saved in the same format that qemu-kvm is already
using.

Note that, in contrast to the suppressed RTC IRQ line, we do not need to
save/restore the PIT line state in the HPET. As we trigger a PIT IRQ
update via the control line, the line state is reconstructed on mode
switch.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

HPET legacy emulation will require control over the PIT IRQ output. To
enable this, add support for an alternative IRQ output object to the PIT
factory function. If the isa_irq number is < 0, this object will be
used.

This also removes the IRQ number property from the PIT class as we now
use a generic GPIO output pin that is connected by the factory function.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move the public interface of the PIT into its own header file and update
all users.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In legacy mode, the HPET suppresses the RTC interrupt delivery via IRQ
8 but keeps track of the RTC output level and applies it when legacy
mode is turned off again. This value has to be preserved across save/
restore as it cannot be reconstructed otherwise.

To document that a raised rtc_irq_level won't survive a vmload without
a hpet/rtc_irq_level subsection, add an explicit clearing to the reset
handler.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid changing the IRQ level to high on reset as it may trigger spurious
events. Instead, open-code the effects of pit_load_count(0) in the reset
handler.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently when disabling login in VNC, the password is cleared out and the
authentication protocol is forced to AUTH_VNC.  If you're using a stronger
authentication protocol, this has the effect of downgrading your security
protocol.

Fix this by only changing the authentication protocol if the current
authentication protocol is AUTH_NONE.  That ensures we're never downgrading.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
--
NB. This patch is derived from one posted by Anthony last year, which got
accidentally lost after Luiz took over the QMP series work

  https://lists.gnu.org/archive/html/qemu-devel/2011-09/msg00392.html

 v1 -> v2
 - Make sure to not demote when changing password (Daniel)
 v2 -> v3
 - Rebase to latest GIT master wrt QMP changes

Since QOM'ification, qdev_try_create() uses object_new() internally,
which asserts "type != NULL" when the type is not registered.
This was revealed by the combination of kvmclock's kvm_enabled() check
and early QOM type registration.

Check whether the class exists before calling object_new(), so that
the caller (e.g., qdev_create) can fail gracefully, telling us which
device could not be created.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@codemonkey.ws>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes gtk-doc warnings.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes a warning from gtk-doc.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove the OpenBSD workaround for the curses probe. This has not been
necessary for 5 releases now.
Signed-off-by: NBrad Smith <brad@comstyle.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

libcacard is only used by system emulation.
Only define libcacard_libs/cflags once.
Signed-off-by: NPaul Brook <paul@codesourcery.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QSLIST can be used for a free list, do it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The main advantage of circular lists (the fact that the head node
has the same memory layout as any other node) is completely negated
by the implementation in qemu-queue.h.  Not surprisingly, nobody
uses QCIRCLEQ.  While this might change if RCU is ever adopted by
QEMU, the QLIST is also RCU-friendly and in fact it is used in a
RCU-like manner by 9pfs already.  So, just kill QCIRCLEQ.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Based on http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/sys/queue.h?rev=1.53
with only the prefix change.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Notifiers do not need to access both ends of the list, and using
a QLIST also simplifies the API.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/nbd-for-anthony:
  nbd: add git tree to MAINTAINERS
  open /dev/nbd in nbd_client_thread
  do not chdir(/) in qemu-nbd before opening all files

* pmaydell/arm-devs.for-upstream: (22 commits)
  hw/pl031: Actually raise interrupt on timer expiry
  MAINTAINERS: Add hw/highbank.c maintainer
  Remove unnecessary includes of primecell.h
  hw/primecell.h: Remove obsolete pl080_init() declaration
  hw/arm_sysctl: Drop legacy init function
  hw/vexpress.c: Add vexpress-a15 machine
  arm_boot: Pass base address of GIC CPU interface, not whole GIC
  hw/vexpress.c: Instantiate the motherboard CLCD
  hw/vexpress.c: Factor out daughterboard-specific initialization
  hw/vexpress.c: Move secondary CPU boot code to SRAM
  hw/vexpress.c: Make motherboard peripheral memory map table-driven
  hw/a15mpcore.c: Add Cortex-A15 private peripheral model
  MAINTAINERS: Add maintainers for Exynos SOC.
  Exynos4210: added display controller implementation
  hw/exynos4210.c: Add LAN support for SMDKC210.
  hw/lan9118: Add basic 16-bit mode support.
  ARM: exynos4210: MCT support.
  ARM: exynos4210: basic Power Management Unit implementation
  ARM: exynos4210: PWM support.
  ARM: exynos4210: UART support
  ...

* stefanha/trivial-patches:
  linux-user: brk() debugging
  virtio: Remove unneeded g_free() check in virtio_cleanup()
  net: remove extra spaces in help messages
  fmopl: Fix typo in function name
  vl.c: Fix typo in variable name
  ide: fix compilation errors when DEBUG_IDE is set
  cpu-exec.c: Correct comment about this file and indentation cleanup
  CODING_STYLE: Clarify style for enum and function type names
  linux-user: fail execve() if env/args too big

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When qemu-nbd becomes a daemon it calls daemon(3) with
nochdir=0, so daemon(3) changes current directory to /.
But at this time, qemu-nbd did not open any user-specified
files yet, so by changing current directory, all non-absolute
paths becomes wrong.  The solution is to pass nochdir=1 to
daemon(3) function, and to chdir("/") after all init has
been performed, before entering the main loop, -- just like
a good daemon should do.

This patch is applicable for -stable.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix a typo in pl031_interrupt() which meant we were setting a bit
in the interrupt mask rather than the interrupt status register
and thus not actually raising an interrupt. This fix allows the
rtctest program from the kernel's Documentation/rtc.txt to pass
rather than hanging.
Reported-by: NDaniel Forsgren <daniel.forsgren@enea.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The primecell.h header now only has the definitions of constants
indicating the usage of the arm_sysctl GPIO lines; remove obsolete
includes of it from source files which don't care about those GPIO
lines.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove an obsolete declaration of pl080_init(), which has been
incorrect since the conversion of pl080 to qdev back in 2009.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>