- 17 2月, 2012 24 次提交
-
-
由 Peter Maydell 提交于
Add the vexpress-a15 machine, and the A-Series memory map it uses. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
The arm_boot secondary boot loader code needs the address of the GIC CPU interface. Obtaining this from the base address of the private peripheral region was possible for A9 and 11MPcore, but the A15 puts the GIC CPU interface in a different place. So make boards pass in the GIC CPU interface address directly. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Instantiate the CLCD on the vexpress motherboard as well as one on the daughterboard -- the A15 daughterboard does not have a CLCD and so relies on the motherboard one. At the moment QEMU doesn't provide infrastructure for selecting which display device gets to actually show graphics -- the first one registered is it. Fortunately this works for the major use case (Linux): if the daughterboard has a CLCD it will come first and be used, otherwise we fall back to the motherboard CLCD. So we don't (currently) need to implement the control register which allows software to tell the mux which video output to pass through to the outside world. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
Factor out daughterboard specifics into a data structure and daughterboard initialization function, in preparation for adding vexpress-a15 support. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
On real Versatile Express hardware, the boot ROM puts the secondary CPU bootcode/holding pen in SRAM. We can therefore rely on Linux not trashing this memory until secondary CPUs have booted up, and can put our QEMU-specific pen code in the same place. This allows us to drop the odd "hack" RAM page we were using before. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Pull the addresses used for mapping motherboard peripherals into memory out into a table. This will allow us to simply provide a second table to implement the "Cortex-A Series" memory map used by the A15 variant of Versatile Express, as well as the current "Legacy" map used by A9. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
Add a model of the Cortex-A15 memory mapped private peripheral space. This is fairly simple because the only memory mapped bit of the A15 is the GIC. Note that we don't currently model a VGIC and therefore don't map the VGIC related bits of the GIC. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Acked-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Mitsyanko Igor 提交于
Exynos4210 display controller (FIMD) has 5 hardware windows with alpha and chroma key blending functions. Signed-off-by: NMitsyanko Igor <i.mitsyanko@samsung.com> Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
SMDKC210 uses lan9215 chip, but lan9118 in 16-bit mode seems to be enough. Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Maksim Kozlov 提交于
Patch adds basic model for Exynos4210 SoC PMU. This model implements PMU registers just as a bulk of memory. Currently, the only reason this device exists is that secondary CPU boot loader uses PMU INFORM5 register as a holding pen. Signed-off-by: NMaksim Kozlov <m.kozlov@samsung.com> Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Maksim Kozlov 提交于
Add basic support of exynos4210 UART Signed-off-by: NMaksim Kozlov <m.kozlov@samsung.com> Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Add initial support of NURI and SMDKC210 boards Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Evgeny Voevodin 提交于
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Make the "machine" option list use list merging, so that multiple -machine arguments (and the -enable-kvm argument) all merge together into a single list. Drop the calls to qemu_opts_reset() which meant that only the last -machine or -enable-kvm option had any effect. This fixes the bug where "-enable-kvm -machine foo" would ignore the '-enable-kvm' option, and "-machine foo -enable-kvm" would ignore the '-machine foo' option. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
Add support for option lists which are merged together, so that "-listname foo=bar -listname bar=baz" is equivalent to "-listname foo=bar,bar=baz" rather than generating two separate lists of options. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
Since target-arm has some CPUState fields for which we take the approach of baking assumptions about them into translated code and then calling tb_flush() when the fields change, we must also tb_flush on CPU reset, because reset is a change of those fields. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Stefan Weil 提交于
The parameters initrd_size and base are already included in the info parameter, so there is no need to pass them separately. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>,
-
由 Vasily Khoruzhick 提交于
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
The correct FPSID for the Cortex-A9 (according to the TRM) is 0x41033090 for the r0p0 that we claim to model. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Paolo Bonzini 提交于
I noticed some unused code in the twl92230, probably from before qdev-ification. This patch makes the machine use the chip's pwrbtn signal. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 16 2月, 2012 5 次提交
-
-
由 Anthony Liguori 提交于
* qemu-kvm/uq/master: apic: Fix legacy vmstate loading for KVM kvm: Implement kvm_irqchip_in_kernel like kvm_enabled kvm: Allow to set shadow MMU size
-
由 Anthony Liguori 提交于
* kraxel/vnc.2: vnc: lift modifier keys on client disconnect. vnc: implement shared flag handling. vnc: fix ctrl key in vnc terminal emulation Fix vnc memory corruption with width = 1400
-
由 Anthony Liguori 提交于
* kiszka/queues/slirp: slirp: Prevent sending ICMP error replies to source-only addresses slirp: Remove unused variable and unused code
-
由 Anthony Liguori 提交于
* kraxel/usb.38: (28 commits) xhci: handle USB_RET_NAK xhci: remote wakeup support xhci: kill port arg from xhci_setup_packet xhci: stop on errors xhci: add trb type name lookup support. xhci: signal low- and fullspeed support usb: add USBBusOps->wakeup_endpoint usb: pass USBEndpoint to usb_wakeup usb: maintain async packet list per endpoint usb: Set USBEndpoint in usb_packet_setup(). usb: add USBEndpoint->{nr,pid} usb: USBPacket: add status, rename owner -> ep usb: fold usb_generic_handle_packet into usb_handle_packet usb: kill handle_packet callback usb-xhci: switch to usb_find_device() usb-musb: switch to usb_find_device() usb-ohci: switch to usb_find_device() usb-ehci: switch to usb_find_device() usb-uhci: switch to usb_find_device() usb: handle dev == NULL in usb_handle_packet() ...
-
由 Anthony Liguori 提交于
* kwolf/for-anthony: AHCI: Masking of IRQs actually masks them sheepdog: fix co_recv coroutine context AHCI: Fix port reset race rewrite QEMU_BUILD_BUG_ON qcow2: Keep unknown header extension when rewriting header qcow2: Update whole header at once vpc: Round up image size during fixed image creation vpc: Add support for Fixed Disk type iSCSI: add configuration variables for iSCSI qemu-io: add write -z option for bdrv_co_write_zeroes qed: add .bdrv_co_write_zeroes() support qed: replace is_write with flags field block: perform zero-detection during copy-on-read block: add .bdrv_co_write_zeroes() interface cutils: extract buffer_is_zero() from qemu-img.c
-
- 15 2月, 2012 4 次提交
-
-
由 Anthony Liguori 提交于
Otherwise we end up with a dangling reference which causes qdev_free() to fail. Reported-by: NMichael Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
qdev_prop_set_* functions are always called by machine init functions that should know what they're doing, so they abort on error. Still, an assert(!errp) does not aid debugging. Print an error before aborting. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paolo Bonzini 提交于
SPARC and PPC set properties to NULL. This can be done with an empty string value. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 11 2月, 2012 5 次提交
-
-
由 Blue Swirl 提交于
Fix this error: /src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size': /src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable] Tested-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jan Kiszka 提交于
The conversion to memory regions broke lazy ROMD switching by forgetting to update the rom_mode state variable. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jan Kiszka 提交于
Helpful to understand guest configurations of things like the i440FX's PAM or the state of ROM devices. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jan Kiszka 提交于
This fixes the regression introduced by cd7a45c9: We lost the or'ing with the full_update flag. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Fix confusion in length calculation in commit cd7a45c9. Reported-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 2月, 2012 2 次提交
-
-
由 Gerd Hoffmann 提交于
Add a field to XHCITransfer to correctly keep track of NAK'ed usb packets. Retry transfers when the endpoint is kicked again. Implement wakeup_endpoint bus op so we can kick the endpoint when needed. With this patch applied the emulated hid devices are working correctly when hooked up to xhci. usb-tabled without polling, yay! Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-