It was not qdev'ified before. Turn it into a SysBusDevice and
initialize it via static properties.

Prepare Old World specific MacIO state and embed the NVRAM state there.

Drop macio_nvram_setup_bar() in favor of sysbus_mmio_map() or
direct use of Memory API.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The state data field is accessed in uint8_t quantities, so switch from
uint32_t argument and return value to uint8_t.

Fix debug format specifiers while at it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Let the machines create two different types. This prepares to move
knowledge about sub-devices from the machines into the devices.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This turns macio_bar_setup() into an implementation detail of the qdev
initfn, to be removed step by step.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Move bar MemoryRegion initialization to an instance_init.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>
[agraf: squash in MAINTAINERS fix]
Signed-off-by: NAlexander Graf <agraf@suse.de>

This reverts commit 67c5322d:

    I'm not sure if the retry logic has ever worked when not using FIFO mode.  I
    found this while writing a test case although code inspection confirms it is
    definitely broken.

    The TSR retry logic will never actually happen because it is guarded by an
    'if (s->tsr_rety > 0)' but this is the only place that can ever make the
    variable greater than zero.  That effectively makes the retry logic an 'if (0)

    I believe this is a typo and the intention was >= 0.  Once this is fixed thoug
    I see double transmits with my test case.  This is because in the non FIFO
    case, serial_xmit may get invoked while LSR.THRE is still high because the
    character was processed but the retransmit timer was still active.

    We can handle this by simply checking for LSR.THRE and returning early.  It's
    possible that the FIFO paths also need some attention.

    Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Even if the previous logic was never worked, new logic breaks stuff -
namely,

 qemu -enable-kvm -nographic -kernel /boot/vmlinuz-$(uname -r) -append console=ttyS0 -serial pty

the above command will cause the virtual machine to stuck at startup
using 100% CPU till one connects to the pty and sends any char to it.

Note this is rather typical invocation for various headless virtual
machines by libvirt.

So revert this change for now, till a better solution will be found.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a trivial patch to harmonize the coding style on
hw/etraxfs_eth.c. This is in preparation to split off the bitbang mdio
code into a separate file.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paul Brook <paul@codesourcery.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

req was created by scsi_req_alloc(), which initializes req->dev to a
value it dereferences.  req->dev isn't changed anywhere else.
Therefore, req->dev can't be null.

Drop the useless null test; it spooks Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a 0-sized disk is found, READ CAPACITY will return a
LUN NOT READY error.  However, because it returns -1 instead
of zero, the HBA will call scsi_req_continue.  This will
typically cause a segmentation fault or an assertion failure.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Basically the same as usb-storage, but without automatic scsi
device setup.  Also features support for up to 16 LUNs.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This is a simpler solution to 869981, where migration breaks since qxl's
rom bar size has changed. Instead of ignoring fields in QXLRom, which is what has
actually changed, we remove some of the modes, a mechanism already
accounted for by the guest. The modes left allow for portrait and
landscape only modes, corresponding to orientations 0 and 1.
Orientations 2 and 3 are dropped.

Added assert so that rom size will fit the future QXLRom increases via
spice-protocol changes.

This patch has been tested with 6.1.0.10015. With the newer 6.1.0.10016
there are problems with both "(flipped)" modes prior to the patch, and
the patch loses the ability to set "Portrait" modes. But this is a
separate bug to be fixed in the driver, and besides the patch doesn't
affect the new arbitrary mode setting functionality.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This reverts commit a1cbfd55.

Test isn't useless.  scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.

Resolve a Coding Style warning in openpic code.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A virtio-s390-bus is created during the init. So one VirtIODevice can be
connected on the virtio-s390-device through this bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This add the virtio-s390-bus which extends virtio-bus. So one VirtIODevice can
be connected on this bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create the virtio-pci device which is abstract. This transport device will
create a virtio-pci-bus, so one VirtIODevice can be connected.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce virtio-pci-bus, which extends virtio-bus. It is used with virtio-pci
transport device.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create the virtio-device which is abstract. All the virtio-device can extend
this class. It also add some functions to virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a max_dev field to BusClass to specify the maximum amount of devices allowed
on the bus (has no effect if max_dev=0)
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

STATUS_TIMEOUT is defined in winnt.h:

  CC    hw/tpci200.o
hw/tpci200.c:34:0:
 warning: "STATUS_TIMEOUT" redefined [enabled by default]
/usr/lib/gcc/x86_64-w64-mingw32/4.6/../../../../x86_64-w64-mingw32/include/winnt.h:1036:0:
 note: this is the location of the previous definition

Use STATUS_TIME instead of STATUS_TIMEOUT as suggested by Alberto Garcia.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

-acpitable {file|data}=file reads the content of file, but it is
in binary form, so the file should be opened usin O_BINARY flag.
On *nix it is a no-op, but on windows and other weird platform
it is really needed.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

defineition -> definition
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NAndreas F=E4rber <afaerber@suse.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

84f2d0ea added an argument to function usb_host_info.
The stub function must match the declaration in usb.h.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Code mixes uint32_t, int and size_t.  Very unlikely to go wrong in
practice, but clean it up anyway.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB.  Clean it
up anyway.  Size overflow now fails assertions.

Bonus: saves a whole bunch of silly casts.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

No caller is checking the value, so all errors get ignored, usually
silently.  assert() instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to

- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
  was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: NAlexander Graf <agraf@suse.de>