This will apply libuser-specific compilation flags (like the ones added by
--enable-user-pie), but keep softmmu emulation targets "as-is".
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It is quite common to have a MemoryRegion with size of INT64_MAX.
When processing alias regions in render_memory_region() it's quite
easy to find a case where it will construct a temporary AddrRange with
a non-zero start, and size still of INT64_MAX.  When means attempting
to compute the end of such a range as start + size will result in
signed integer overflow.

This integer overflow means that addrrange_intersects() can
incorrectly report regions as not intersecting when they do.  For
example consider the case of address ranges {0x10000000000,
0x7fffffffffffffff} and {0x10010000000, 0x10000000} where the second
is in fact included completely in the first.

This patch rearranges addrrange_intersects() to avoid the integer
overflow, correcting this behaviour.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAvi Kivity <avi@redhat.com>

QCowL2Meta::offset is not cluster aligned but only sector aligned
however nb_clusters count cluster from cluster start.
This fix range check. Note that old code have no corruption issues
related to this check cause it only cause intersection to occur
when shouldn't.
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Member variable is_read is written, but never read
(contrary to its name). Remove it.

Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QCow2Meta structure was inserted into list before many fields are
initialized. Currently is not a problem cause all occur in a lock
but if qcow2_alloc_clusters would in a future unlock this lock
some issues could arise.
Initializing fields before inserting fix the problem.
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

change fails while the tray is locked by the guest.  eject -f forces
it open and removes any media.  Unfortunately, the tray closes again
instantly.  Since the lock remains as it is, there is no way to insert
another medium unless the guest voluntarily unlocks.

Fix by leaving the tray open after monitor eject.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

To let device models distinguish between eject and load.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockDriverState member buffer_alignment is initially 512.  The device
model may set them, with bdrv_set_buffer_alignment().  If the device
model gets detached (hot unplug), the device's alignment is left
behind.  Only okay because device hot unplug automatically destroys
the BlockDriverState.  But that's a questionable feature, best not to
rely on it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Device models should be able to set it without an unclean include of
block_int.h.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Including it in device models is unclean, including it without a
reason adds insult to injury.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's convenience stuff for block device models, so block.h isn't the
ideal home either, but better than block_int.h.

Permits moving some #include "block_int.h" from device model .h into
.c.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Need to ask the device, so this requires new BlockDevOps member
is_tray_open().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's a confused mess (see previous commit).  No users remain.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockDriverState member removable is a confused mess.  It is true when
an ide-cd, scsi-cd or floppy qdev is attached, or when the
BlockDriverState was created with -drive if={floppy,sd} or -drive
if={ide,scsi,xen,none},media=cdrom ("created removable"), except when
an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached.

Three users remain:

1. eject_device(), via bdrv_is_removable() uses it to determine
   whether a block device can eject media.

2. bdrv_info() is monitor command "info block".  QMP documentation
   says "true if the device is removable, false otherwise".  From the
   monitor user's point of view, the only sensible interpretation of
   "is removable" is "can eject media with monitor commands eject and
   change".

A block device can eject media unless a device is attached that
doesn't support it.  Switch the two users over to new
bdrv_dev_has_removable_media() that returns exactly that.

3. bdrv_getlength() uses to suppress its length cache when media can
   change (see commit 46a4e4e6).  Media change is either monitor
   command change (updates the length cache), monitor command eject
   (doesn't update the length cache, easily fixable), or physical
   media change (invalidates length cache, not so easily fixable).

I'm refraining from improving anything here, because this series is
long enough already.  Instead, I simply switch it over to
bdrv_dev_has_removable_media() as well.

This changes the behavior of the length cache and of monitor commands
eject and change in two cases:

a. drive not created removable, no device attached

   The commit makes the drive removable, and defeats the length cache.

   Example: -drive if=none

b. drive created removable, but the attached drive is non-removable,
   and doesn't call bdrv_set_removable(..., 0) (most devices don't)

   The commit makes the drive non-removable, and enables the length
   cache.

   Example: -drive if=xen,media=cdrom -M xenpv

   The other non-removable devices that don't call
   bdrv_set_removable() can't currently use a drive created removable,
   either because they aren't qdevified, or because they lack a drive
   property.  Won't stay that way.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use a subsection, so that migration to older version still works,
provided the tray is closed and unlocked.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Don't fail when tray is already open.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive
already has the requested state.  cmd_start_stop_unit() fails when
asked to eject while the tray is open and locked.  Fix that.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix leak of s->snap in failure path.  Simplify error paths for the whole
function.
Reported-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

No assignment in condition.  Remove duplicate ret > 0 check.
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow the client id to be specified in the config string via 'id=' so that
users can control who they authenticate as.  Currently they are stuck with
the default ('admin').  This is necessary for anyone using authentication
in their environment.
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While there, make the locked parameter bool.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Requires new BlockDevOps member is_medium_locked().  Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The device model knows best when to accept the guest's eject command.
No need to detour through the block layer.

bdrv_eject() can't fail anymore.  Make it void.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState.  Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState.  Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 4be9762a is now completely redone.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is
open.  Unfortunately, there are two different kinds of users, with
conflicting needs.

1. Device models using bdrv_eject(), currently ide-cd and scsi-cd.
They expect bdrv_is_inserted() to reflect the tray status.  Commit
4be9762a makes them happy.

2. Code that wants to know whether a BlockDriverState has media, such
as find_image_format(), bdrv_flush_all().  Commit 4be9762a makes them
unhappy.  In particular, it breaks flush on VM stop for media ejected
by the guest.

Revert the change to bdrv_is_inserted().  Check the tray status in the
device models instead.

Note on IDE: Since only ATAPI devices have a tray, and they don't
accept ATA commands since the recent commit "ide: Reject ATA commands
specific to drive kinds", checking in atapi.c suffices.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState since commit 4be9762a.  As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState since commit 4be9762a.  As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

"eject" is misleading; it means "eject" when start is clear, but
"load" when start is set.  Rename to loej, because that's how MMC-5
calls it, in section 6.40.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing
WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX,
WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT,
WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY,
WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD,
WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE,
WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT.  Restrict them
to IDE_HD and IDE_CFATA.

Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE.  Restrict
them to IDE_CFATA, like the other CFA_ commands.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

No functional change.

It would be nice to have handler functions in the table, like commit
e1a064f9 did for ATAPI.  Left for another day.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for
PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for
PACKET feature set devices.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>