- 16 11月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Add save/restore of MSR for migration and cpuid bit. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 21 10月, 2010 12 次提交
-
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
commit 6389c45441269baa2873e6feafebd17105ddeaf6 Author: Jan Kiszka <jan.kiszka@siemens.com> Date: Mon Mar 1 18:17:26 2010 +0100 qemu-kvm: Cleanup/fix TSC and PV clock writeback Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
And add kvm_has_msr_hsave_pa(), to avoid warnings on older kernels without support. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
commit 2bba4446746add456ceeb0e8359a43032a2ea333 Author: Alexander Graf <agraf@suse.de> Date: Thu Dec 18 15:38:32 2008 +0100 Enable nested SVM support in userspace Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Hidetoshi Seto 提交于
This patch removes following warnings: target-i386/kvm.c: In function 'kvm_put_msrs': target-i386/kvm.c:782: error: unused variable 'i' target-i386/kvm.c: In function 'kvm_get_msrs': target-i386/kvm.c:1083: error: label at end of compound statement Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Hidetoshi Seto 提交于
There is no reason why SRAO event received by the main thread is the only one that being broadcasted. According to the x86 ASDM vol.3A 15.10.4.1, MCE signal is broadcast on processor version 06H_EH or later. This change is required to handle SRAR in smp guests. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Hidetoshi Seto 提交于
And restruct this block to call kvm_mce_in_exception() only when it is required. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
From: Avi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's commit 1bab5d11545d8de5facf46c28630085a2f9651ae Author: Huang Ying <ying.huang@intel.com> Date: Wed Mar 3 16:52:46 2010 +0800 Add savevm/loadvm support for MCE MCE registers are saved/load into/from CPUState in kvm_arch_save/load_regs. To simulate the MCG_STATUS clearing upon reset, MSR_MCG_STATUS is set to 0 for KVM_PUT_RESET_STATE. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef Author: Huang Ying <ying.huang@intel.com> Date: Mon Sep 21 10:43:25 2009 +0800 MCE: Relay UCR MCE to guest UCR (uncorrected recovery) MCE is supported in recent Intel CPUs, where some hardware error such as some memory error can be reported without PCC (processor context corrupted). To recover from such MCE, the corresponding memory will be unmapped, and all processes accessing the memory will be killed via SIGBUS. For KVM, if QEMU/KVM is killed, all guest processes will be killed too. So we relay SIGBUS from host OS to guest system via a UCR MCE injection. Then guest OS can isolate corresponding memory and kill necessary guest processes only. SIGBUS sent to main thread (not VCPU threads) will be broadcast to all VCPU threads as UCR MCE. aliguori: fix build Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's MCE support commit c68b2374c9048812f488e00ffb95db66c0bc07a7 Author: Huang Ying <ying.huang@intel.com> Date: Mon Jul 20 10:00:53 2009 +0800 Add MCE simulation support to qemu/kvm KVM ioctls are used to initialize MCE simulation and inject MCE. The real MCE simulation is implemented in Linux kernel. The Kernel part has been merged. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the svm cpuid feature flags to the qemu intialization path. It also adds the svm features available on phenom to its cpu-definition and extends the host cpu type to support all svm features KVM can provide. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 29 6月, 2010 4 次提交
-
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Sheng Yang 提交于
Would use it later for XSAVE related CPUID. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 19 6月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Pass only APICState when accessing APIC from CPU code. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 5月, 2010 4 次提交
-
-
由 Gleb Natapov 提交于
On AMD some bits from 1.EDX are reported in 80000001.EDX. The mask used to copy bits from 1.EDX to 80000001.EDX is incorrect resulting in unsupported features passed into a guest. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Continue vcpu execution in case emulation failure happened while vcpu was in userspace. In this case #UD will be injected into the guest allowing guest OS to kill offending process and continue. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Process INIT/SIPI requests and enable -smp > 1. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Validate that KVM vcpu state is only read/written from cpu thread itself or that cpu is stopped. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 26 4月, 2010 2 次提交
-
-
由 Sheng Yang 提交于
If we use larger BIOS image than current 256KB, we would need move reserved TSS and EPT identity mapping pages. Currently TSS support this, but not EPT. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Make use of the new KVM_GET/SET_DEBUGREGS to save/restore the x86 debug registers. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 18 4月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Fixes clang errors: CC i386-softmmu/kvm.o /src/qemu/target-i386/kvm.c:40:9: error: 'dprintf' macro redefined In file included from /src/qemu/target-i386/kvm.c:21: In file included from /src/qemu/qemu-common.h:27: In file included from /usr/include/stdio.h:910: /usr/include/bits/stdio2.h:189:12: note: previous definition is here CC i386-softmmu/kvm-all.o /src/qemu/kvm-all.c:39:9: error: 'dprintf' macro redefined In file included from /src/qemu/kvm-all.c:23: In file included from /src/qemu/qemu-common.h:27: In file included from /usr/include/stdio.h:910: /usr/include/bits/stdio2.h:189:12: note: previous definition is here Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 13 3月, 2010 1 次提交
-
-
由 Andre Przywara 提交于
Correct me if I am wrong, but kvm_trim looks like a really bloated implementation of a bitwise AND. So remove this function and replace it with the real stuff(TM). Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 04 3月, 2010 3 次提交
-
-
由 Jan Kiszka 提交于
Do not write nmi_pending, sipi_vector, and mpstate unless we at least go through a reset. And TSC as well as KVM wallclocks should only be written on full sync, otherwise we risk to drop some time on state read-modify-write. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
This grand cleanup drops all reset and vmsave/load related synchronization points in favor of four(!) generic hooks: - cpu_synchronize_all_states in qemu_savevm_state_complete (initial sync from kernel before vmsave) - cpu_synchronize_all_post_init in qemu_loadvm_state (writeback after vmload) - cpu_synchronize_all_post_init in main after machine init - cpu_synchronize_all_post_reset in qemu_system_reset (writeback after system reset) These writeback points + the existing one of VCPU exec after cpu_synchronize_state map on three levels of writeback: - KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run) - KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped) - KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well) This level is passed to the arch-specific VCPU state writing function that will decide which concrete substates need to be written. That way, no writer of load, save or reset functions that interact with in-kernel KVM states will ever have to worry about synchronization again. That also means that a lot of reasons for races, segfaults and deadlocks are eliminated. cpu_synchronize_state remains untouched, just as Anthony suggested. We continue to need it before reading or writing of VCPU states that are also tracked by in-kernel KVM subsystems. Consequently, this patch removes many cpu_synchronize_state calls that are now redundant, just like remaining explicit register syncs. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
So far we synchronized any dirty VCPU state back into the kernel before updating the guest debug state. This was a tribute to a deficite in x86 kernels before 2.6.33. But as this is an arch-dependent issue, it is better handle in the x86 part of KVM and remove the writeback point for generic code. This also avoids overwriting the flushed state later on if user space decides to change some more registers before resuming the guest. We furthermore need to reinject guest exceptions via the appropriate mechanism. That is KVM_SET_GUEST_DEBUG for older kernels and KVM_SET_VCPU_EVENTS for recent ones. Using both mechanisms at the same time will cause state corruptions. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 01 3月, 2010 1 次提交
-
-
由 Paul Brook 提交于
Only include ioport.h where it is actually needed. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 21 2月, 2010 1 次提交
-
-
由 Jes Sorensen 提交于
Remove all references to KVM_CR3_CACHE as it was never implemented. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 2月, 2010 1 次提交
-
-
由 Jes Sorensen 提交于
Hi, Kevin and I have agreed on the approach for this one now. So here is the latest version of the patch for QEMU, submitting e820 reservation entries via fw_cfg. Cheers, Jes Use qemu-cfg to provide the BIOS with an optional table of e820 entries. Notify the BIOS of the location of the TSS+EPT range to by reserving it via the e820 table. This matches a corresponding patch for Seabios, however older versions of Seabios will default to the hardcoded address range and stay compatible with current QEMU. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2010 2 次提交
-
-
由 Jan Kiszka 提交于
From qemu-kvm: Kernels before 2.6.30 misreported some essential CPU features via KVM_GET_SUPPORTED_CPUID. Fix them up. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
-
由 Jan Kiszka 提交于
The final version of VCPU events in 2.6.33 will allow to skip nmi_pending and sipi_vector on KVM_SET_VCPU_EVENTS. For now let's write them unconditionally, which is unproblematic for upstream due to missing SMP support. Future version which enable SMP will write them only on reset. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 14 1月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Initialize KVM paravirt cpuid leaf and allow user to control guest visible PV features through -cpu flag. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 1月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Without this qemu can even start on kvm modules with events support since default value of exception_injected in zero and this is #DE exception. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Marcelo correctly remarked that there are usage conflicts between QEMU core code and KVM /wrt exception_index. So spend a separate field and also save/restore it properly. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 1 次提交
-
-
由 Glauber Costa 提交于
Currently, the msrs involved in setting up pvclock are not saved over migration and/or save/restore. This patch puts their value in special fields in our CPUState, and deal with them using vmstate. kvm also has to account for it, by including them in the msr list for the ioctls. This is a backport from qemu-kvm.git [v2: sucessfully build without kerneldir ] Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 12月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
KVM_GET_MSR_INDEX_LIST returns -E2BIG when the provided space is too small for all MSRs. But this is precisely the error we trigger with the initial request in order to obtain that size. Do not fail in that case. This caused a subtle corruption of the guest state as MSR_STAR was not properly saved/restored. The corruption became visible with latest kvm optimizing the MSR updates. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 12月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
This patch extends the qemu-kvm state sync logic with support for KVM_GET/SET_VCPU_EVENTS, giving access to yet missing exception, interrupt and NMI states. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-