Most of the fields in VncState are initialized in the
vnc_connect() method, but some are done in vnc_init_state()
instead.

The purpose of having vnc_init_state() is to delay starting
of the VNC wire protocol until after the websockets handshake
has completed. As such the vnc_init_state() method only needs
to be used for initialization that is dependant on the wire
protocol running.

This also lets us get rid of the initialized boolean flag
from the VncState struct.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-9-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The vnc_init_state method calls reset_keys() to reset the
modifier key state. This was originally added in

  commit 53762ddb
  Author: malc <malc@c046a42c-6fe2-441c-8c8c-71466251a162>
  Date:   Mon Dec 1 20:57:52 2008 +0000

    Reset the key modifiers upon client connect

This was valid at this time because there was only the
single VncState object which was persistent across client
connections and so needed resetting.

The persistent data was later split off into VncDisplay
and VncState was allocated at time of client connection:

  commit 753b4053
  Author: aliguori <aliguori@c046a42c-6fe2-441c-8c8c-71466251a162>
  Date:   Mon Feb 16 14:59:30 2009 +0000

    Support multiple VNC clients (Brian Kress)

at which point the modifier state is always 0 due to
use of g_new0. As such the reset_keys() call has been
a no-op ever since.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-8-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Just before accepting a new client connection the vnc_listen_io
method calls graphic_hw_update(). This is bogus because there
is a call to this method already in vnc_state_init() and the
client doesn't need up2date graphics console before reaching
that.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-7-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

There is a lot of repeated code in the auth type setup method,
particularly around checking TLS credential types. Refactor
it to reduce duplication and instead of having one method
do both plain and websockets at once, call it separately
for each.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-6-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Normally code declares 'VncDisplay *vd' or 'VncState *vs'
but there are a bunch of places which misleadingly declare
'VncDisplay *vs'.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-5-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The 'ws_tls' field in VncState is only ever representing
the result of 'tlscreds != NULL' and is thus pointless.
Replace use of 'ws_tls' with a direct check against
'tlscreds'
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-4-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The 'ws_enabled' field is never used outside of the
vnc_display_open method, so can be a local variable.

The 'enabled' field is easily replaced by a check
for whether 'lsock' is non-NULL.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-3-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The last line in vnc_init_state() says

     /* vs might be free()ed here */

This was added in

  commit 198a0039
  Author: Gerd Hoffmann <kraxel@redhat.com>
  Date:   Tue Jun 16 14:19:48 2009 +0200

    vnc: rework VncState release workflow.

because the preceeding 'vnc_update_client()' could indeed
release the VncState instance.

The call to vnc_update_client() was removed not long after
though in

  commit 1fc62412
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Mon Aug 3 10:54:32 2009 +0100

    single vnc server surface

and so the comment has been wrong ever since
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475163940-26094-2-git-send-email-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

various usb bugfixes
some xhci cleanups

# gpg: Signature made Wed 12 Oct 2016 13:38:27 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-usb-20161012-1:
  usb-redir: allocate buffers before waking up the host adapter
  usb: Fix incorrect default DMA offset.
  usb: fix serial generator
  xhci: make xhci_epid_to_usbep accept XHCIEPContext
  xhci: drop XHCITransfer->{slotid,epid}
  xhci: add & use xhci_kick_epctx()
  xhci: drop XHCITransfer->xhci
  xhci: use linked list for transfers
  xhci: drop unused comp_xfer field
  xhci: decouple EV_QUEUE from TD_QUEUE
  xhci: limit the number of link trbs we are willing to process
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Needed to make sure usb redirection is prepared to actually handle the
callback from the usb host adapter.  Without this interrupt endpoints
don't work on xhci.

Note: On ehci the usb_wakeup() call only schedules a BH for the actual
work, which hides this bug because the allocation happens before ehci
calls back even without this patch.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: NVijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: NDeepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

snprintf return value is *not* the number of chars written into the
buffer, but the number of chars needed.  So in case the buffer is too
small you can go alloc a bigger one and try again.  But that also means
you can't simply use the return value for the next snprintf call
without checking beforehand that things did actually fit.

Problem is that usb_desc_create_serial didn't perform that check, so a
loooong path string (can happen with deep pci-bridge nesting) results in
the third snprintf call smashing the stack.

Fix this by throwing out all the snpintf calls and use g_strdup_printf
instead.

https://bugzilla.redhat.com/show_bug.cgi?id=1381630Reported-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com

All callsites have a XHCIEPContext pointer anyway, so we can just pass
it directly instead of fiddeling with slotid and epid.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-9-git-send-email-kraxel@redhat.com

We can use XHCITransfer->epctx->{slotid,epid} instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-8-git-send-email-kraxel@redhat.com

xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid.  So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com

Use XHCITransfer->epctx->xhci instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-6-git-send-email-kraxel@redhat.com

xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams.  xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work.  But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.

So remove static XHCITransfer array from XHCIEPContext.  Use a linked
list instead, and allocate/free XHCITransfer as needed.  Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs.  That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.

New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-4-git-send-email-kraxel@redhat.com

EV_QUEUE must not change because an array of that size is part of live
migration data.  Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com

Needed to avoid we run in circles forever in case the guest builds
an endless loop with link trbs.
Reported-by: NLi Qiang <liqiang6-s@360.cn>
Tested-by: NP J P <ppandit@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com

# gpg: Signature made Wed 12 Oct 2016 09:43:03 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: Add missing execution mode of guest events
  trace: introduce a formal group name for trace events
  trace: pass trace-events to tracetool as a positional param
  trace: push reading of events up a level to tracetool main
  trace: rename _read_events to read_events
  trace: get rid of generated-events.h/generated-events.c
  trace: dynamically allocate event IDs at runtime
  trace: dynamically allocate trace_dstate in CPUState
  trace: provide mechanism for registering trace events
  trace: don't abort qemu if ftrace can't be initialized
  trace: emit name <-> ID mapping in simpletrace header
  trace: remove the TraceEventID and TraceEventVCPUID enums
  trace: give each trace event a named TraceEvent struct
  trace: break circular dependency in event-internal.h
  trace: remove duplicate control.h includes in generated-tracers.h
  trace: remove global 'uint16 dstate[]' array
  trace: remove some now unused functions
  trace: convert code to use event iterators
  trace: add trace event iterator APIs
  trace: move colo trace events to net/ sub-directory
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add missing execution mode documentation for the 'guest_cpu_enter' and
'guest_cpu_reset' events.
Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147566900921.7708.656450813307396468.stgit@fimbulvetr.bsc.es
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The declarations in the generated-tracers.h file are
assuming there's only ever going to be one instance
of this header, as they are not namespaced. When we
have one header per event group, if a single source
file needs to include multiple sets of trace events,
the symbols will all clash.

This change thus introduces a '--group NAME' arg to the
'tracetool' program. This will cause all the symbols in
the generated header files to be given a unique namespace.

If no group is given, the group name 'common' is used,
which is suitable for the current usage where there is
only one global trace-events file used for code generation.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-21-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of reading the contents of 'trace-events' from stdin,
accept the filename as a positional parameter. This also
allows for reading from multiple files, though this facility
is not used at this time.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-20-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Move the reading of events out of the 'tracetool.generate'
method and into tracetool.main, so that the latter is not
tied to generating from a single source of events.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-19-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The _read_events method is used by callers outside of
its module, so should be a public method, not private.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-18-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.

The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of having the code generator assign event IDs and
event VCPU IDs, assign them when the events are registered
at runtime. This will allow code to be generated from
individual trace-events without having to figure out
globally unique numbering at build time.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-16-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The CPUState struct has a bitmap tracking which VCPU
events are currently active. This is indexed based on
the event ID values, and sized according the maximum
TraceEventVCPUID enum value.

When we start dynamically assigning IDs at runtime,
we can't statically declare a bitmap without making
an assumption about the max event count. This problem
can be solved by dynamically allocating the per-CPU
dstate bitmap.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.

The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.

[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:

linux-user/bsd-user: initialize trace events subsystem

The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.

--Stefan]
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the ftrace backend is compiled into QEMU, any attempt
to start QEMU while non-root will fail due to the
inability to open /sys/kernel/debug/tracing/tracing_on.

Add a fallback into the code so that it connects up the
trace_marker_fd variable to /dev/null when getting
EACCES on the 'trace_on' file. This allows QEMU to
run, with ftrace turned into a no-op.

[Fixed s/setting/getting/ and s/EACCESS/EACCES/ errors pointed out by
Eric Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-13-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently simpletrace assumes that events are given IDs
starting from 0, based on the order in which they appear
in the trace-events file, with no gaps. When the
trace-events file is split up, this assumption becomes
problematic.

To deal with this, extend the simpletrace format so that
it outputs a table of event name <-> ID mappings. That
will allow QEMU to assign arbitrary IDs to events without
breaking simpletrace parsing.

The v3 simple trace format was

  FILE HEADER
  EVENT TRACE RECORD 0
  EVENT TRACE RECORD 1
  ...
  EVENT TRACE RECORD N

The v4 simple trace format is now

  FILE HEADER
  EVENT MAPPING RECORD 0
  EVENT MAPPING RECORD 1
  ...
  EVENT MAPPING RECORD M
  EVENT TRACE RECORD RECORD 0
  EVENT TRACE RECORD RECORD 1
  ...
  EVENT TRACE RECORD N

Although this shows all the mapping records being emitted
upfront, this is not required by the format. While the main
simpletrace backend will emit all mappings at startup,
the systemtap simpletrace.stp script will emit the mappings
at first use. eg

  FILE HEADER
  ...
  EVENT MAPPING RECORD 0
  EVENT TRACE RECORD RECORD 0
  EVENT TRACE RECORD RECORD 1
  EVENT MAPPING RECORD 1
  EVENT TRACE RECORD RECORD 2
  ...
  EVENT TRACE RECORD N

This is more space efficient given that most trace records
only include a subset of events.

In modifying the systemtap simpletrace code, a 'begin' probe
was added to emit the trace event header, so you no longer
need to add '--no-header' when running simpletrace.py for
systemtap generated trace files.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-12-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The TraceEventID and TraceEventVCPUID enums constants are
no longer actually used for anything critical.

The TRACE_EVENT_COUNT limit is used to determine the size
of the TraceEvents array, and can be removed if we just
NULL terminate the array instead.

The TRACE_VCPU_EVENT_COUNT limit is used as a magic value
for marking non-vCPU events, and also for declaring the
size of the trace dstate mask in the CPUState struct.
The former usage can be replaced by a dedicated constant
TRACE_EVENT_VCPU_NONE, defined as (uint32_t)-1. For the
latter usage, we can simply define a constant for the
number of VCPUs, avoiding the need for the full enum.

The only other usages of the enum values can be replaced
by accesing the id/vcpu_id fields via the named TraceEvent
structs.
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-11-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently we only expose a TraceEvent array, which must
be indexed via the TraceEventID enum constants. This
changes the generator to expose a named TraceEvent
instance for each event, with an _EVENT suffix.
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-10-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently event-internal.h includes generated-events.h,
while generated-events.h includes event-internal.h
causing a circular dependency.

event-internal.h requires that the content of
generated-events.h comes first, so that it can see
the typedefs for TraceEventID and TraceEventVCPUID.

Switching the TraceEvent struct to use uint32_t
for the two ID fields removes the dependency on
the typedef, allowing events-internal.h to be a
self-contained header. This will then let the patch
following this move event-internal.h to the top of
generated-events.h, so we can expose TraceEvent
struct variables in generated-events.h
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-9-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The format/h.py file adds an include for control.h to
generated-tracers.h. ftrace, log and syslog, then
add more duplicate includes for control.h.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-8-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of having a global dstate array, declare a single
'uint16 TRACE_${EVENT_NAME}_DSTATE' variable for each
trace event. Record a pointer to this variable in the
TraceEvent struct too.

By turning trace_event_get_state_dynamic_by_id into a
macro, this still hits the fast path, and cache affinity
is ensured by declaring all the uint16 vars adjacent to
each other.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-7-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The trace_event_count, trace_event_id and
trace_event_pattern methods are no longer required
now that everything is using the iterator APIs

The trace_event_set_state and trace_event_set_vcpu_state
macros were also unused.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-6-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This converts the HMP/QMP monitor API implementations
and some internal trace control methods to use the new
trace event iterator APIs.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-5-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Currently methods which want to iterate over trace events,
do so using the trace_event_count() and trace_event_id()
methods. This leaks the concept of a single ID enum to
the callers. There is an alternative trace_event_pattern()
method which can be used in an iteration context, but its
design is stateless, so is not easy to expand it in the
future.

This defines a formal iterator API will provide a future-
proof way of iterating over events.

The iterator is also able to apply a pattern match filter
to events, further removing the need for the pattern
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-4-git-send-email-berrange@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>