Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So we get a hot-pluggable 16550 uart.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Split serial.c into serial.c, serial.h and serial-isa.c.  While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h.  The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* quintela/migration-next-20121017: (41 commits)
  cpus: create qemu_in_vcpu_thread()
  savevm: make qemu_file_put_notify() return errors
  savevm: un-export qemu_file_set_error()
  block-migration: handle errors with the return codes correctly
  block-migration:  Switch meaning of return value
  block-migration: make flush_blks() return errors
  buffered_file: buffered_put_buffer() don't need to set last_error
  savevm: Only qemu_fflush() can generate errors
  savevm: make qemu_fill_buffer() be consistent
  savevm: unexport qemu_ftell()
  savevm: unfold qemu_fclose_internal()
  savevm: make qemu_fflush() return an error code
  savevm: Remove qemu_fseek()
  virtio-net: use qemu_get_buffer() in a temp buffer
  savevm: unexport qemu_fflush
  migration: make migrate_fd_wait_for_unfreeze() return errors
  buffered_file: make buffered_flush return the error code
  buffered_file: callers of buffered_flush() already check for errors
  buffered_file: We can access directly to bandwidth_limit
  buffered_file: unfold migrate_fd_close
  ...

* qemu-kvm/memory/dma: (23 commits)
  pci: honor PCI_COMMAND_MASTER
  pci: give each device its own address space
  memory: add address_space_destroy()
  dma: make dma access its own address space
  memory: per-AddressSpace dispatch
  s390: avoid reaching into memory core internals
  memory: use AddressSpace for MemoryListener filtering
  memory: move tcg flush into a tcg memory listener
  memory: move address_space_memory and address_space_io out of memory core
  memory: manage coalesced mmio via a MemoryListener
  xen: drop no-op MemoryListener callbacks
  kvm: drop no-op MemoryListener callbacks
  xen_pt: drop no-op MemoryListener callbacks
  vfio: drop no-op MemoryListener callbacks
  memory: drop no-op MemoryListener callbacks
  memory: provide defaults for MemoryListener operations
  memory: maintain a list of address spaces
  memory: export AddressSpace
  memory: prepare AddressSpace for exporting
  xen_pt: use separate MemoryListeners for memory and I/O
  ...

Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.

Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.

Tested using

  setpci -s 03 COMMAND=3

while a ping was running on a NIC in slot 3.  The kernel (Linux) detected
the stall and recovered after the command

  setpci -s 03 COMMAND=7

was issued.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.

Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since address spaces can be created dynamically by device hotplug, they
can also be destroyed dynamically.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of accessing the cpu address space, use an address space
configured by the caller.

Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we use a global radix tree to dispatch memory access.  This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).

A side effect is that address_space_io also gains a dispatch table.  When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: NAvi Kivity <avi@redhat.com>

use cpu_physical_memory_is_io() instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary.  Prepare for that by
moving the flush into a tcg-specific listener.

Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: NAvi Kivity <avi@redhat.com>

With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.

The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: NAvi Kivity <avi@redhat.com>

commit 38f419f3 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa.  But while techinically
that fix has been correct, all other similar variables are handled
differently.  Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather
than hw_error().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If the guest attempts an offset to a nonexistent register, just
log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use the new LOG_UNIMP tracing to report unimplemented
features.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rather than a mix of direct printing to stderr and aborting
via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an include of qemu-log.h to hw.h, so that device model
code has access to these logging functions without the need
to directly include qemu-log.h.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add a new category for device models to log guest behaviour
which is likely to be a guest bug of some kind (accessing
nonexistent registers, reading 32 bit wide registers with
a byte access, etc). Making this its own log category allows
those who care (mostly guest OS authors) to see the complaints
without bothering most users.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Subroutines do their own local temporary management.
Within disas_sparc_insn we limit the existance of the variable
to OP=2 insns, and delay initialization as late as is reasonable
for the specific XOP.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

And initialize it such that it (may) write directly to rd.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use cpu_tmp0 for other stuff, like Write Priv Register.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The use of "tl" functions and a tmp64 is logically incompatible.
Use cpu_tmp0 instead.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

In all cases we don't have write-before-read problems.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use a locally allocated temporary instead.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove the last uses of cpu_tmp32.  Unify the code between sparc64
and sparc32 by using the proper "tl" functions.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

No need to copy to a temporary to store 32 bits.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We don't need another temporary here.  Load directly into the
register we want to set.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>