This patch adds a test for record/replay an execution of x86_64 machine.
Execution scenario includes simple kernel boot, which allows testing
basic hardware interaction in RR mode.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: NPhilippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073589656.20809.14010247947948822435.stgit@pasha-ThinkPad-X280>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Skip test_x86_64_pc on Travis-CI]
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

This patch adds a base for testing kernel boot recording and replaying.
Each test has the phase of recording and phase of replaying.
Virtual machines just boot the kernel and do not interact with
the network.
Structure and image links for the tests are borrowed from boot_linux_console.py
Testing controls the message pattern at the end of the kernel
boot for both record and replay modes. In replay mode QEMU is also
intended to finish the execution automatically.
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Tested-by: NPhilippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <159073589099.20809.14078431743098373301.stgit@pasha-ThinkPad-X280>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Keep imports sorted alphabetically]
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

    Acceptance tests can test any piece of the QEMU codebase.
    As such, the directory holding them does not belong to a specific
    subsystem with designated maintainers.

    Each subsystem covered by a test is welcomed to add the test path
    to its section.
    See for example commits 71b290e7, b11785ca or 5d480ddd.

Add an entry for to allow reviewers to be notified when acceptance /
integration tests are added or modified.
The designated reviewers are not maintainers, subsystem maintainers
are expected to merge their tests.
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NCleber Rosa <crosa@redhat.com>
Message-Id: <20200129212345.20547-30-philmd@redhat.com>
Message-Id: <20200605165656.17578-1-philmd@redhat.com>

tests/qht-bench.c:287:29: error: implicit conversion from 'unsigned long'
  to 'double' changes value from 18446744073709551615
  to 18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
        *threshold = rate * UINT64_MAX;
                          ~ ^~~~~~~~~~

Fix this by splitting the 64-bit constant into two halves,
each of which is individually perfectly representable, the
sum of which produces the correct arithmetic result.

This is very likely just a sticking plaster over some underlying
incorrect code, but it will suppress the warning for the moment.

Cc: Emilio G. Cota <cota@braap.org>
Reported-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s390x update:
- update Linux headers to 5.8-rc1 (for vfio-ccw path handling)
- vfio-ccw: add support for path handling
- documentation fix

# gpg: Signature made Thu 18 Jun 2020 16:36:04 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200618:
  docs/s390x: fix vfio-ap device_del description
  vfio-ccw: Add support for the CRW region and IRQ
  s390x/css: Refactor the css_queue_crw() routine
  vfio-ccw: Refactor ccw irq handler
  vfio-ccw: Add support for the schib region
  vfio-ccw: Refactor cleanup of regions
  Linux headers: update
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Thu 18 Jun 2020 14:16:22 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request: (33 commits)
  net: Drop the NetLegacy structure, always use Netdev instead
  net: Drop the legacy "name" parameter from the -net option
  hw/net/e1000e: Do not abort() on invalid PSRCTL register value
  colo-compare: Fix memory leak in packet_enqueue()
  net/colo-compare.c: Correct ordering in complete and finalize
  net/colo-compare.c: Check that colo-compare is active
  net/colo-compare.c: Only hexdump packets if tracing is enabled
  net/colo-compare.c: Fix deadlock in compare_chr_send
  chardev/char.c: Use qemu_co_sleep_ns if in coroutine
  net/colo-compare.c: Create event_bh with the right AioContext
  net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
  net: cadence_gem: Fix RX address filtering
  net: cadence_gem: TX_LAST bit should be set by guest
  net: cadence_gem: Update the reset value for interrupt mask register
  net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
  net: cadence_gem: Add support for jumbo frames
  net: cadence_gem: Fix up code style
  net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
  net: cadence_gem: Set ISR according to queue in use
  net: cadence_gem: Define access permission for interrupt registers
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Migration (and HMP and virtiofs) pull 2020-06-17

Migration:
   HMP/migration and test changes from Mao Zhongyi
   multifd fix from Laurent Vivier
HMP
   qom-set partial reversion/change from David Hildenbrand
      now you need -j to pass json format, but it's regained the
      old 100M type format.
  Memory leak fix from Pan Nengyuan

Virtiofs
  fchmod seccomp fix from Max Reitz
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Wed 17 Jun 2020 19:34:58 BST
# gpg:                using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20200617a:
  migration: fix multifd_send_pages() next channel
  docs/xbzrle: update 'cache miss rate' and 'encoding rate' to docs
  monitor/hmp-cmds: improvements for the 'info migrate'
  monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
  monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
  monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
  monitor/hmp-cmds: add units for migrate_parameters
  tests/migration: fix unreachable path in stress test
  tests/migration: mem leak fix
  hmp: Make json format optional for qom-set
  qom-hmp-cmds: fix a memleak in hmp_qom_get
  virtiofsd: Whitelist fchmod
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that the "name" parameter is gone, there is hardly any difference
between NetLegacy and Netdev anymore, so we can drop NetLegacy and always
use Netdev to simplify the code quite a bit.

The only two differences that were really left between Netdev and NetLegacy:

1) NetLegacy does not allow a "hubport" type. We can continue to block
   this with a simple check in net_client_init1() for this type.

2) The "id" parameter was optional in NetLegacy (and an internal id
   was chosen via assign_name() during initialization), but it is mandatory
   for Netdev. To avoid that the visitor code bails out here, we have to
   add an internal id to the QemuOpts already earlier now.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

It's been deprecated since QEMU v3.1, so it's time to finally
remove it. The "id" parameter can simply be used instead.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

libFuzzer found using 'qemu-system-i386 -M q35':

qemu: hardware error: e1000e: PSRCTL.BSIZE0 cannot be zero
CPU #0:
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000663
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 0000ffff
IDT=     00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
==1988== ERROR: libFuzzer: deadly signal
    #6 0x7fae4d3ea894 in __GI_abort (/lib64/libc.so.6+0x22894)
    #7 0x563f4cc59a1d in hw_error (qemu-fuzz-i386+0xe8ca1d)
    #8 0x563f4d7c93f2 in e1000e_set_psrctl (qemu-fuzz-i386+0x19fc3f2)
    #9 0x563f4d7b798f in e1000e_core_write (qemu-fuzz-i386+0x19ea98f)
    #10 0x563f4d7afc46 in e1000e_mmio_write (qemu-fuzz-i386+0x19e2c46)
    #11 0x563f4cc9a0a7 in memory_region_write_accessor (qemu-fuzz-i386+0xecd0a7)
    #12 0x563f4cc99c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
    #13 0x563f4cc987b4 in memory_region_dispatch_write (qemu-fuzz-i386+0xecb7b4)

It simply sent the following 2 I/O command to the e1000e
PCI BAR #2 I/O region:

  writew 0x0100 0x0c00 # RCTL =   E1000_RCTL_DTYP_MASK
  writeb 0x2170 0x00   # PSRCTL = 0

2813 static void
2814 e1000e_set_psrctl(E1000ECore *core, int index, uint32_t val)
2815 {
2816     if (core->mac[RCTL] & E1000_RCTL_DTYP_MASK) {
2817
2818         if ((val & E1000_PSRCTL_BSIZE0_MASK) == 0) {
2819             hw_error("e1000e: PSRCTL.BSIZE0 cannot be zero");
2820         }

Instead of calling hw_error() which abort the process (it is
meant for CPU fatal error condition, not for device logging),
log the invalid request with qemu_log_mask(LOG_GUEST_ERROR)
and return, ignoring the request.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

The patch is to fix the "pkt" memory leak in packet_enqueue().
The allocated "pkt" needs to be freed if the colo compare
primary or secondary queue is too big.

Replace the error_report of full queue with a trace event.
Signed-off-by: NDerek Su <dereksu@qnap.com>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

In colo_compare_complete, insert CompareState into net_compares
only after everything has been initialized.
In colo_compare_finalize, remove CompareState from net_compares
before anything is deinitialized.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

If the colo-compare object is removed before failover and a
checkpoint happens, qemu crashes because it tries to lock
the destroyed event_mtx in colo_notify_compares_event.

Fix this by checking if everything is initialized by
introducing a new variable colo_compare_active which
is protected by a new mutex colo_compare_mutex. The new mutex
also protects against concurrent access of the net_compares
list and makes sure that colo_notify_compares_event isn't
active while we destroy event_mtx and event_complete_cond.

With this it also is again possible to use colo without
colo-compare (periodic mode) and to use multiple colo-compare
for multiple network interfaces.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Tested-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Else the log will be flooded if there is a lot of network
traffic.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

The chr_out chardev is connected to a filter-redirector
running in the main loop. qemu_chr_fe_write_all might block
here in compare_chr_send if the (socket-)buffer is full.
If another filter-redirector in the main loop want's to
send data to chr_pri_in it might also block if the buffer
is full. This leads to a deadlock because both event loops
get blocked.

Fix this by converting compare_chr_send to a coroutine and
putting the packets in a send queue.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Tested-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

To be able to convert compare_chr_send to a coroutine in the
next commit, use qemu_co_sleep_ns if in coroutine.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

qemu_bh_new will set the bh to be executed in the main
loop. This causes crashes as colo_compare_handle_event assumes
that it has exclusive access the queues, which are also
concurrently accessed in the iothread.

Create the bh with the AioContext of the iothread to fulfill
these assumptions and fix the crashes. This is safe, because
the bh already takes the appropriate locks.
Signed-off-by: NLukas Straub <lukasstraub2@web.de>
Reviewed-by: NZhang Chen <chen.zhang@intel.com>
Reviewed-by: NDerek Su <dereksu@qnap.com>
Tested-by: NDerek Su <dereksu@qnap.com>
Signed-off-by: NZhang Chen <chen.zhang@intel.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:

hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16

Reproducer:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg701914.html

Fix by using the peer.
Reported-by: N"Alexander Bulekov" <alxndr@bu.edu>
Acked-by: NAlexander Bulekov <alxndr@bu.edu>
Fixes: ca77d85e ("net: complete all queued packets on VM stop")
Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>

Two defects are fixed:

1/ Detection of multicast frames
2/ Treating drop of mis-addressed frames as non-error
Signed-off-by: NTong Ho <tong.ho@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

TX_LAST bit should not be set by hardware, its set by guest to inform
the last bd of the frame.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Mask all interrupt on reset.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Advertise support of clear-on-read for ISR registers.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Add a property "jumbo-max-len", which sets default value of jumbo frames
up to 16,383 bytes. Add Frame length checks for standard and jumbo
frames.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Fix the code style for register definitions.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Moving this buffers to CadenceGEMState, as their size will be increased
more when JUMBO frames support is added.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Set ISR according to queue in use, added interrupt support for
all queues.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Q1 to Q7 ISR's are clear-on-read, IER/IDR registers
are write-only, mask reg are read-only.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Set irq's specific to a queue, present implementation is setting q1 irq
based on q0 status.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

During wrap around and reset, queues are pointing to initial base
address of queue 0, irrespective of what queue we are dealing with.
Fix it by assigning proper base address every time.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Enabling debug breaks the build, Fix them and make debug statements
always compilable. Fix few statements to use sized integer casting.
Signed-off-by: NSai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Log with GUEST_ERROR what the guest is doing wrong.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Bit #14 is "DE" for 'Descriptor Error':

  When set, indicates a frame truncation caused by a frame
  that does not fit within the current descriptor buffers,
  and that the 21143 does not own the next descriptor.

  [Table 4-1. RDES0 Bit Fields Description]
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NJason Wang <jasowang@redhat.com>

The tulip network driver in a qemu-system-hppa emulation is broken in
the sense that bigger network packages aren't received any longer and
thus even running e.g. "apt update" inside the VM fails.

The breakage was introduced by commit 8ffb7265 ("check frame size and
r/w data length") which added checks to prevent accesses outside of the
rx/tx buffers.

But the new checks were implemented wrong. The variable rx_frame_len
counts backwards, from rx_frame_size down to zero, and the variable len
is never bigger than rx_frame_len, so accesses just can't happen and the
checks are unnecessary.
On the contrary the checks now prevented bigger packages to be moved
into the rx buffers.

This patch reverts the wrong checks and were sucessfully tested with a
qemu-system-hppa emulation.

Fixes: 8ffb7265 ("check frame size and r/w data length")
Buglink: https://bugs.launchpad.net/bugs/1874539Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Removal of duplicated RSC definitions. Changing names of the
fields to ones defined in the Linux header.
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Save and restore RSS/hash report configuration.
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Similar to VMSTATE_VARRAY_UINT32_ALLOC, but the size is
16-bit field.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Suggest VIRTIO_NET_F_HASH_REPORT if specified in device
parameters.
If the VIRTIO_NET_F_HASH_REPORT is set,
the device extends configuration space. If the feature
is negotiated, the packet layout is extended to
accomodate the hash information. In this case deliver
packet's hash value and report type in virtio header
extension.
Use for configuration the same procedure as already
used for RSS. We add two fields in rss_data that
controls what the device does with the calculated hash
if rss_data.enabled is set. If field 'populate' is set
the hash is set in the packet, if field 'redirect' is
set the hash is used to decide the queue to place the
packet to.
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process
incoming packets, calculate packet's hash and place the
packet into respective RX virtqueue.
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Optionally report RSS feature.
Handle RSS configuration command and keep RSS parameters
in virtio-net device context.
Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>