- 23 10月, 2012 22 次提交
-
-
由 Paolo Bonzini 提交于
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Before: $ qemu-system-x86_64 nbd:localhost:12345 inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused After: $ x86_64-softmmu/qemu-system-x86_64 nbd:localhost:12345 qemu-system-x86_64: Failed to connect to socket: Connection refused qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Before: $ qemu-system-x86_64 -monitor tcp:localhost:6000 (starts despite error) $ qemu-system-x86_64 -monitor tcp:foo.bar:12345 getaddrinfo(foo.bar,12345): Name or service not known chardev: opening backend "socket" failed $ qemu-system-x86_64 -monitor tcp:localhost:443,server=on inet_listen_opts: bind(ipv4,127.0.0.1,443): Permission denied inet_listen_opts: FAILED chardev: opening backend "socket" failed After: $ x86_64-softmmu/qemu-system-x86_64 -monitor tcp:localhost:6000 x86_64-softmmu/qemu-system-x86_64: -monitor tcp:localhost:6000: Failed to connect to socket: Connection refused chardev: opening backend "socket" failed $ x86_64-softmmu/qemu-system-x86_64 -monitor tcp:foo.bar:12345 qemu-system-x86_64: -monitor tcp:foo.bar:12345: address resolution failed for foo.bar:12345: Name or service not known chardev: opening backend "socket" failed $ x86_64-softmmu/qemu-system-x86_64 -monitor tcp:localhost:443,server=on qemu-system-x86_64: -monitor tcp:localhost:443,server=on: Failed to bind socket: Permission denied chardev: opening backend "socket" failed Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
And remove the superfluous integer return value. Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Error propagation is already there for socket backends. Add it to other protocols, simplifying code that tests for errors that will never happen. With all protocols understanding Error, the code can be simplified further by removing the return value. Unfortunately, the quality of error messages varies depending on where the error is detected, because no Error is passed to the NonBlockingConnectHandler. Thus, the exact error message still cannot be sent to the user if the OS reports it asynchronously via SO_ERROR. If NonBlockingConnectHandler received an Error**, we could for example report the error class and/or message via a new field of the query-migration command even if it is reported asynchronously. Before: (qemu) migrate fd:ffff migrate: An undefined error has occurred (qemu) info migrate (qemu) After: (qemu) migrate fd:ffff migrate: File descriptor named 'ffff' has not been found (qemu) info migrate capabilities: xbzrle: off Migration status: failed total time: 0 milliseconds Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This makes migration-unix.c again a cut-and-paste job from migration-tcp.c, exactly as it was in the beginning. :) Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The call to migrate_fd_error() was missing for non-socket backends, so centralize it in qmp_migrate(). Before: (qemu) migrate fd:ffff migrate: An undefined error has occurred (qemu) info migrate (qemu) After: (qemu) migrate fd:ffff migrate: An undefined error has occurred (qemu) info migrate capabilities: xbzrle: off Migration status: failed total time: 0 milliseconds (The awful error message will be fixed later in the series). Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The migration code is using errp to detect "internal" errors, this means that it relies on errp being non-NULL. No impact so far because our only QMP clients (the QMP marshaller and HMP) never pass a NULL Error **. But if we had others, this patch would make sure that migration can work with a NULL Error **. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This patch mostly mimics what was done to TCP sockets, but simpler because there is only one address to try. It also includes a free EINTR bug fix. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
They are just wrappers and do not need a Win32-specific version. Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This lets me adjust the clients to do proper error propagation first, thus avoiding temporary regressions in the quality of the error messages. Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
These functions help maintaining homogeneous formatting of error messages that include strerror values. Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add multiport serial card implementation, with two variants, one featuring two and one featuring four ports. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
So we get a hot-pluggable 16550 uart. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Split serial.c into serial.c, serial.h and serial-isa.c. While being at creating a serial.h header file move the serial prototypes from pc.h to the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of boards which just want the serial bits from pc.h Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This makes it possible for QEMU to use transparent huge pages (THP) when transparent_hugepage/enabled=madvise. Otherwise THP is only used when it's enabled system wide. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* quintela/migration-next-20121017: (41 commits) cpus: create qemu_in_vcpu_thread() savevm: make qemu_file_put_notify() return errors savevm: un-export qemu_file_set_error() block-migration: handle errors with the return codes correctly block-migration: Switch meaning of return value block-migration: make flush_blks() return errors buffered_file: buffered_put_buffer() don't need to set last_error savevm: Only qemu_fflush() can generate errors savevm: make qemu_fill_buffer() be consistent savevm: unexport qemu_ftell() savevm: unfold qemu_fclose_internal() savevm: make qemu_fflush() return an error code savevm: Remove qemu_fseek() virtio-net: use qemu_get_buffer() in a temp buffer savevm: unexport qemu_fflush migration: make migrate_fd_wait_for_unfreeze() return errors buffered_file: make buffered_flush return the error code buffered_file: callers of buffered_flush() already check for errors buffered_file: We can access directly to bandwidth_limit buffered_file: unfold migrate_fd_close ...
-
由 Anthony Liguori 提交于
* qemu-kvm/memory/dma: (23 commits) pci: honor PCI_COMMAND_MASTER pci: give each device its own address space memory: add address_space_destroy() dma: make dma access its own address space memory: per-AddressSpace dispatch s390: avoid reaching into memory core internals memory: use AddressSpace for MemoryListener filtering memory: move tcg flush into a tcg memory listener memory: move address_space_memory and address_space_io out of memory core memory: manage coalesced mmio via a MemoryListener xen: drop no-op MemoryListener callbacks kvm: drop no-op MemoryListener callbacks xen_pt: drop no-op MemoryListener callbacks vfio: drop no-op MemoryListener callbacks memory: drop no-op MemoryListener callbacks memory: provide defaults for MemoryListener operations memory: maintain a list of address spaces memory: export AddressSpace memory: prepare AddressSpace for exporting xen_pt: use separate MemoryListeners for memory and I/O ...
-
- 22 10月, 2012 11 次提交
-
-
由 Avi Kivity 提交于
Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when the bit is clear. Honor PCI_COMMAND_MASTER by inserting a memory region into the device's bus master address space, and tying its enable status to PCI_COMMAND_MASTER. Tested using setpci -s 03 COMMAND=3 while a ping was running on a NIC in slot 3. The kernel (Linux) detected the stall and recovered after the command setpci -s 03 COMMAND=7 was issued. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Accesses from different devices can resolve differently (depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so set up an address space for each device. Currently iommus are expressed outside the memory API, so this doesn't work if an iommu is present. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Since address spaces can be created dynamically by device hotplug, they can also be destroyed dynamically. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of accessing the cpu address space, use an address space configured by the caller. Eventually all dma functionality will be folded into AddressSpace, but we have to start from something. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Currently we use a global radix tree to dispatch memory access. This only works with a single address space; to support multiple address spaces we make the radix tree a member of AddressSpace (via an intermediate structure AddressSpaceDispatch to avoid exposing too many internals). A side effect is that address_space_io also gains a dispatch table. When we remove all the pre-memory-API I/O registrations, we can use that for dispatching I/O and get rid of the original I/O dispatch. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
use cpu_physical_memory_is_io() instead. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Using the AddressSpace type reduces confusion, as you can't accidentally supply the MemoryRegion you're interested in. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
We plan to make the core listener listen to all address spaces; this will cause many more flushes than necessary. Prepare for that by moving the flush into a tcg-specific listener. Later we can avoid registering the listener if tcg is disabled. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
With this change, memory.c no longer knows anything about special address spaces, so it is prepared for AddressSpace based DMA. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of calling a global function on coalesced mmio changes, which routes the call to kvm if enabled, add coalesced mmio hooks to MemoryListener and make kvm use that instead. The motivation is support for multiple address spaces (which means we we need to filter the call on the right address space) but the result is cleaner as well. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Michael Tokarev 提交于
commit 38f419f3 fixed a breakage with CONFIG_QEMU_HELPERDIR which has been introduced by 8bf188aa. But while techinically that fix has been correct, all other similar variables are handled differently. Make it consistent, and let scripts/create_config expand and capitalize the variable properly like for all other qemu_*dir variables. Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 20 10月, 2012 7 次提交
-
-
由 Aurelien Jarno 提交于
Like the MOVr instruction, the FMOVr instruction has the condition encoded between bits 10 and 12. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Use LOG_GUEST_ERROR rather than hw_error or direct fprintf. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather than hw_error(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather than hw_error(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
If the guest attempts an offset to a nonexistent register, just log this via LOG_GUEST_ERROR rather than killing QEMU with a hw_error. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Use the new LOG_UNIMP tracing to report unimplemented features. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Peter Maydell 提交于
Rather than a mix of direct printing to stderr and aborting via hw_error(), use LOG_UNIMP and LOG_GUEST_ERROR. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-