All operations in this group are no-ops, because cache ought to be
transparent to applications. However cache may be abused, then we'll
need to actually implement these opcodes.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

All operations in this group are no-ops, because there are no delayed
side effects.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Reserved opcodes must generate illegal instruction exception. Usually
they signal emulation quality problems.
Not implemented opcodes are good to see.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- base + offset load/store operations for 1/2/4 byte values;
- cache operations (not implemented);
- multiprocessor synchronization operations.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- ST1: SAR (shift amount special register) manipulation, NSA(U);
- RST1: shifts, 16-bit multiplication.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- access to Special Registers (wsr, rsr);
- access to User Registers (wur, rur);
- misc. operations option (value clamp, sign extension, min, max);
- conditional moves.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Special Registers hold the majority of the state added to the processor
by the options. See ISA, 5.3 for details.

User Registers hold state added in support of designer's TIE and in some
cases of options that Tensilica provides. See ISA, 5.4 for details.

Only registers mapped in sregnames or uregnames are considered valid.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Group SNM0 (indirect jumps and calls).
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- BZ (comparison to zero);
- BI0 (comparison to signed immediate);
- BI1 (comparison to unsigned immediate);
- B (two registers comparison, bit sets comparison);
- BEQZ.N/BNEZ.N (narrow comparison to zero).
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Sample board and sample CPU core are used for debug and may be used for
development of custom SoC emulators.

This board has two fixed size memory regions for DTCM and ITCM and
variable length SRAM region.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

NEG and ABS are the only members of RT0 group.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Instructions with op0 >= 8 are 2 bytes long, others are 3 bytes long.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Set up disas_xtensa_insn switch structure, mark required options on high
level groups. Implement arithmetic/bit logic/jump/call0.

Implement code generation loop with single step/breakpoint checking.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move mipsnet_init() function to mipssim machine
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove a useless variable, spotted by clang analyzer:
/src/qemu/target-sparc/op_helper.c:3904:18: warning: unused variable 'tmp' [-Wunused-variable]
    target_ulong tmp = val;
The error message is actually incorrect since the variable is used.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid this warning from clang analyzer by deleting the variable:
/src/qemu/hw/lsi53c895a.c:895:5: warning: Value stored to 'id' is never read
    id = (current_tag >> 8) & 0xf;
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid this warning from clang analyzer:
/src/qemu/cpu-exec.c:97:5: warning: Value stored to 'phys_page2' is never read
    phys_page2 = -1;

Adjust the scope of the variable while at it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Avoid these warnings from clang analyzer:
/src/qemu/target-i386/kvm.c:772:5: warning: Value stored to 'cwd' is never read
    cwd = swd = twd = 0;
/src/qemu/target-i386/kvm.c:772:11: warning: Although the value stored to 'swd' is used in the enclosing expression, the value is never actually read from 'swd'
    cwd = swd = twd = 0;
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The code does not have any effect as is, fix it.

Spotted by clang analyzer:
/src/qemu/hw/hid.c:99:13: warning: Value stored to 'x1' is never read
            x1 = 1;
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove duplicate entries from SCSI command table, spotted by
clang analyzer:
/src/qemu/hw/scsi-bus.c:979:40: warning: initializer overrides prior initialization of this subobject
        [ ERASE_16                 ] = "ERASE_16",
/src/qemu/hw/scsi-bus.c:978:40: note: previous initialization is here
        [ WRITE_SAME_16            ] = "WRITE_SAME_16",
/src/qemu/hw/scsi-bus.c:984:40: warning: initializer overrides prior initialization of this subobject
        [ MAINTENANCE_IN           ] = "MAINTENANCE_IN",
/src/qemu/hw/scsi-bus.c:917:40: note: previous initialization is here
        [ MAINTENANCE_IN           ] = "MAINTENANCE_IN",
/src/qemu/hw/scsi-bus.c:985:40: warning: initializer overrides prior initialization of this subobject
        [ MAINTENANCE_OUT          ] = "MAINTENANCE_OUT",
/src/qemu/hw/scsi-bus.c:918:40: note: previous initialization is here
        [ MAINTENANCE_OUT          ] = "MAINTENANCE_OUT",
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove an unnecessary assignment, spotted by clang analyzer:
/src/qemu/qemu-io.c:995:9: warning: Value stored to 'offset' is never read
        offset += reqs[i].qiov->size;
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Actually, version.rc doesn't need config-host.mak but config-host.h, fix it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compile g364fb in hwlib. Two compilations less for the full build.
Acked-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

fc764105 added an include for qemu-common.h to trace/control.h, which
made all users of this header file dependent on GENERATED_HEADERS. Since
it's used by pretty much all the trace backends now, make trace-obj-y
dependent on GENERATED_HEADERS.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid using deprecated gnutls functions with recent gnutls versions.
Fixes build failure on Fedora 16.  Keep the old way for compatibility
with old installations such as RHEL-5 (gnutls 1.4.x).

Based on a patch from Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Older gcc versions don't understand 0b<bits>,
use hex representation instead.

Fixes build failure on RHEL-5.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Initialize glib threads unconditionally in main() instead
of using g_thread_get_initialized in the 9p code.

Fixes a build failure on RHEL-5, which ships glib 2.12.
g_thread_get_initialized was added in 2.20.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To make good use of transparent hugepages, KVM requires that guest-physical
and host-virtual addresses share the low 21 bits (as opposed to just the low
12 bits normally required).

Adjust qemu_vmalloc() to honor that requirement.  Ignore it for small regions
to avoid fragmentation.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Qemu currently assumes that chtype is typedef'd to unsigned long, but
this is not necessarily the case (ncurses, for instance, can configure
this at build-time).  This patch uses the predefined chtype if qemu is
configured for curses support and falls back to unsigned long otherwise.

Fixes bug 568614.
Signed-off-by: NDevin J. Pohly <djpohly+launchpad@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adding a 2nd balloon device after unplugging the first one doesn't work.
Also, the 'info balloon' command should indicate an error mentioning no
balloon device is registered after unplug.

Reproduction steps given by Shaolong Hu:

(qemu) info balloon
Device 'balloon' has not been activated by the guest
(qemu) device_add virtio-balloon-pci,id=balloon1
(qemu) info balloon
balloon: actual=4096
(qemu) balloon 2048
(qemu) info balloon
balloon: actual=2048
(qemu) device_del balloon1
(qemu) info balloon
balloon: actual=4096
(qemu) balloon 2048
(qemu) info balloon
balloon: actual=4096
(qemu) device_del balloon1
Device 'balloon1' not found
(qemu) device_add virtio-balloon-pci,id=balloon1
Another balloon device already registered
Device 'virtio-balloon-pci' could not be initialized
(qemu) device_add virtio-balloon-pci,id=balloon2
Another balloon device already registered
Device 'virtio-balloon-pci' could not be initialized
Reported-by: NShaolong Hu <shu@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a balloon device gets unplugged, allow the balloon handlers to be
freed.
Reported-by: NShaolong Hu <shu@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The ppc64 code generation backend uses an rldicr (Rotate Left Double
Immediate and Clear Right) instruction to implement zero extension of
a 32 bit quantity to a 64 bit quantity (INDEX_op_ext32u_i64).  However
this is wrong - this instruction clears specified low bits of the
value, instead of high bits as we require for a zero extension.  It
should instead use an rldicl (Rotate Left Double Immediate and Clear
Left) instruction.

Presumably amongst other things, this causes the SLOF firmware image
used with -M pseries to not boot on a ppc64 host.

It appears this bug was exposed by commit
0bf1dbdc (tcg/ppc64: fix 16/32 mixup)
which enabled the use of the op_ext32u_i64 operation on the ppc64
backend.
Signed-off-by: NThomas Huth <thuth@de.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nmalc <av1474@comtv.ru>

Previously, the address space soft limit was set mcache_max_size. So,
before the mcache_max_size was reached by the mapcache, QEMU was killed
for overuse of the virtual address space.

This patch fix that by setting the soft limit the maximum than can have
QEMU. So the soft and hard limit are always set to RLIM_INFINITY if QEMU
is privileged.

In case QEMU is not run as root and the limit is too low, the maximum
mapcache size will be set the rlim_max - 80MB because observed that QEMU
use 75MB more than the maximum mapcache size after several empirical
tests.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

cpu_ioreq_move might move 8 bytes at a time so we must make sure that
the temporary variable can hold 8 bytes.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>