Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace the usage of DDK headers with the SDK counterpart "winioctl.h".
Signed-off-by: NFilip Navara <filip.navara@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While fixing migration with -S, commit
89befdd1 broke the rest of us. Poor
glommer, with a poor family, spare him his life from this monstruosity.

Since the unconditional vm_start, not autostart was the villain, I'm putting
back autostart. Let me know if you prefer other solutions, it doesn't really matter,
doesn't really matter to me.

Any way the wind blows...
Signed-off-by: NGlauber Costa <glommer@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The only caller of on_vcpu() is protected by ifdef
KVM_CAP_SET_GUEST_DEBUG, so protect on_vcpu() too otherwise QEMU
may not to build.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Calling gettimeofday() to compute a time interval can cause problems if
the system clock jumps forwards or backwards; replace updtime() with
qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if
it is available.

Also remove some useless macros.
Signed-off-by: NEd Swierk <eswierk@aristanetworks.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The UDP emulation code for talk has been commented out since the
beginning of time, and unless someone who runs CU-SeeMe on qemu with
user-mode networking can vouch that the special magic (a) is necessary
and (b) works, let's get rid of the code.
Signed-off-by: NEd Swierk <eswierk@aristanetworks.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I don't think it's critical to do this, but it's
best to keep uninit and error recovery consistent.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Follow on patch will use it to determine the size of the MADT and
other BIOS tables.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We currently use host endian long types to store information
in the dirty bitmap.

This works reasonably well on Little Endian targets, because the
u32 after the first contains the next 32 bits. On Big Endian this
breaks completely though, forcing us to be inventive here.

So Ben suggested to always use Little Endian, which looks reasonable.

We only have dirty bitmap implemented in Little Endian targets so far
and since PowerPC would be the first Big Endian platform, we can just
as well switch to Little Endian always with little effort without
breaking existing targets.

This is the userspace part of the patch. It shouldn't change anything
for existing targets, but help PowerPC.

It replaces my older patch called "Use 64bit pointer for dirty log".
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Dirty logs currently get written with native "long" size. On little endian
it doesn't matter if we use uint64_t instead though, because we'd still end
up using the right bytes.

On big endian, this does become a bigger problem, so we need to ensure that
kernel and userspace talk the same language, which means getting rid of "long"
and using a defined size instead.

So I decided to use 64 bit types at all times. This doesn't break existing
targets but will in conjunction with a patch I'll send to the KVM ML make
dirty logs work with 32 bit userspace on 64 kernel with big endian.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch addresses the problems found by Andriy Gapon:

- The code was incorrectly overwriting the high order 32
  bits of the timer and hpet config registers. This didn't show up
  in testing because linux and windows use hpet in legacy mode,
  where the high order 32 bits (advertising available interrupts)
  of the timer config register are ignored, and the high order 32
  bits of the hpet config register are reserved and unused.

- The mask for level-triggered interrupts was off by a bit. (hpet
  doesn't currently support level-triggered interrupts).

In addition, I removed some unused #defines, and corrected the ioapic
interrupt values advertised. I'd set this up early in hpet development
and never went back to correct it, and no bugs resulted since linux and
windows use hpet in legacy mode where available interrupts are ignored.
Signed-off-by: NBeth Kon <eak@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Demo QemuOpts in action ;)

Implementing a alternative way to specify the filename should be
just a few lines of code now once we decided how the cmd line syntax
should look like.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This stores device parameters in a better way than unparsed strings.

New types:
  QemuOpt       -  one key-value pair.
  QemuOpts      -  group of key-value pairs, belonging to one
                   device, i.e. one drive.
  QemuOptsList  -  list of some kind of devices, i.e. all drives.

Functions are provided to work with these types.  The plan is that some
day we will pass around QemuOpts pointers instead of strings filled with
"key1=value1,key2=value2".

Check out the next patch to see all this in action ;)
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

cleanup pretty simliar to the drives_table removal patch:
 - drop the table and make a linked list out of it.
 - pass around struct pointers instead of table indices.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

-drive accepts the new id= now, allowing to explicitely name your
drives.  They will show up with that name in "info block" if specified,
otherwise the existing namimg scheme is used to autogenerate one.

There is also a new function to lookup drives by name.  Not used yet.
The plan is to link disk drivers and drives using the drive id instead
of passing around pointers to BlockDriveState.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

First step cleaning up the drives handling.  This one does nothing but
removing drives_table[], still it became seriously big.

drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index.  This needs adaption in
*tons* of places all over.

The drives are now maintained as linked list.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hook i44fx pcihost into sysbus.
Convert Host bridge and ISA bridge pci devices to qdev.
Tag as no-user.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The -device switch is the users frontend to the qdev_device_add function
added by the previous patch.

Also adds a linked list where command line options can be saved.
Use it for the new -device and for the -usbdevice and -bt switches.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch implements a parser and qdev tree walker for bus paths and
adds qdev_device_add on top of this.

A bus path can be:
  (1) full path, i.e. /i440FX-pcihost/pci.0/lsi/scsi.0
  (2) bus name, i.e. "scsi.0".  Best used together with id= to make
      sure this is unique.
  (3) relative path starting with a bus name, i.e. "pci.0/lsi/scsi.0"

For the (common) case of a single child bus being attached to a device
it is enougth to specify the device only, i.e. "pci.0/lsi" will be
accepted too.

qdev_device_add() adds devices and accepts bus= parameters to find the
bus the device should be attached to.  Without bus= being specified it
takes the first bus it finds where the device can be attached to (i.e.
first pci bus for pci devices, ...).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create a default bus name if none is passed to qbus_create().

If the parent device has DeviceState->id set it will be used to create
the bus name,. i.e. -device lsi,id=foo will give you a scsi bus named
"foo.0".

If there is no id BusInfo->name (lowercased) will be used instead, i.e.
-device lsi will give you a scsi bus named "scsi.0".

A scsi adapter with two scsi busses would have "scsi.0" and "scsi.1" or
"$id.0" and "$id.1" busses.  The numbers of the child busses are per
device, i.e. when adding two lsi adapters both will have a "*.0" child
bus.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Put the new property into use.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So we can parse "$slot.$fn" strings into devfn numbers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The pc-0.11 type allows users of qemu-0.11 to use a machine type which
they know will remain compatible when the upgrade to qemu-0.12.

Management tools may choose to canonicalize the 'pc' machine type to
'pc-0.11' so that if the 'pc' alias changes target in future versions
of qemu, the machine type used will remain compatible.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add an 'alias' field to QEMUMachine and display it in the output of
'qemu -M ?' with an '(aliased to foo)' suffix.

Aliases can change targets in newer versions of qemu, so management tools
may choose canonicalize machine types to ensure that if a user chooses an
alias, that the actual machine type used will remain compatible in
future.

This is intended to mimic a symlink to a machine description file.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows a program to initialize a host networking device using a
file descriptor passed over a unix monitor socket.

The program must first pass the file descriptor using SCM_RIGHTS
ancillary data with the getfd monitor command. It then may do
"host_net_add tap fd=name" to use the named file descriptor.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add monitor commands to support passing file descriptors via
SCM_RIGHTS.

getfd assigns the passed file descriptor a name for use with other
monitor commands.

closefd allows passed file descriptors to be closed. If a monitor
command actually uses a named file descriptor, closefd will not be
required.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If a file descriptor is passed via a message with SCM_RIGHTS ancillary
data on a unix socket, store the file descriptor for use in the
chr_read() handler. Close the file descriptor if it was not used.

The qemu_chr_get_msgfd() API provides access to the passed descriptor.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Split out tcp_chr_recv() out of tcp_chr_read() and implement it on
non-win32 using recvmsg(). This is needed for a subsequent patch
which implements SCM_RIGHTS support.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- implement "used" bit in tlb translation entry
- mark tlb entry used if qemu code/data translation succeeds
- fold i/d mmu replacement writes code into replace_tlb_1bit_lru which
adds 1bit lru replacement algorithm; previously code tried to replace
first unlocked entry only

- extract more bitmasks to named macros
- add "immu" or "dmmu" type name to debugging output where appropriate

Signed-off-by: igor.v.kovalenko@gmail.com

--
Kind regards,
Igor V. Kovalenko

- add names to mmu registers, this helps understanding the code which
uses/modifies them.
- fold i/d mmu tlb entries tag and tte arrays into arrays of tlb entries
- extract demap_tlb routine (code duplication)
- extract replace_tlb routine (code duplication)

- flush qemu tlb translations when replacing sparc64 mmu tlb entries

I have no test case which demands flushing qemu translations,
and this patch should have no other visible changes to runtime.

Signed-off-by: igor.v.kovalenko@gmail.com

--
Kind regards,
Igor V. Kovalenko

My self-built PPC kernel doesn't fit in the region reserved for
the kernel, so I can't use -kernel with it.

Let's just extend the region.
Signed-off-by: NAlexander Graf <agraf@suse.de>

When giving KVM a slot of a size not on page boundary, it chokes. So let's
just round up the VGA BIOS size so nobody complains anymore and we don't need
to implement sub-page slots.

Required for booting a PPC guest in KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: Nmalc <av1474@comtv.ru>

KVM can have an in-kernel pit or irqchip. While we don't implement it
yet, having a way for test for it (that always returns zero) will allow us
to reuse code in qemu-kvm that tests for it.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>