Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7027 c046a42c-6fe2-441c-8c8c-71466251a162

The vga screen dump function updates last_width and last_height,
but does not change the DisplaySurface that these variables describe.
A consequent vga_draw_graphic() will therefore fail to resize the
surface and crash.

Fix by invalidating the display state after a screen dump, forcing
vga_draw_graphic() to reallocate the DisplaySurface.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7026 c046a42c-6fe2-441c-8c8c-71466251a162

There is a much more elegant fix that will follow up after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7025 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7024 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7023 c046a42c-6fe2-441c-8c8c-71466251a162

In vnc.c in pixel_format_message, the code tries to clear the
QEMU_ALLOCATED_FLAG from the client display surface, however
it uses the wrong operator and ends up enabling all other
flags. Most notably this enables the big endian flag and
causes some chaos.
Signed-off-by: NBrian Kress <kressb@moose.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7022 c046a42c-6fe2-441c-8c8c-71466251a162

This ties up the preadv/pwritev syscalls to qemu if they are declared in
unistd.h.  This is the case currently on at least NetBSD and OpenBSD and
will hopefully soon be the case on Linux.

Thanks to Blue Swirl and Gerd Hoffmann for the configure autodetection
of preadv/pwritev.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7021 c046a42c-6fe2-441c-8c8c-71466251a162

Make all AIO requests vectored and defer linearization until the actual
I/O thread.  This prepares for using native preadv/pwritev.

Also enables asynchronous direct I/O by handling that case in the I/O thread.

Qcow and qcow2 propably want to be adopted to directly deal with multi-segment
requests, but that can be implemented later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7020 c046a42c-6fe2-441c-8c8c-71466251a162

Always use the vectored APIs to reduce code churn once we switch the BlockDriver
API to be vectored.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7019 c046a42c-6fe2-441c-8c8c-71466251a162

Looks like the two bdrv_raw instances were missed last time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7018 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7017 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7016 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7015 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7014 c046a42c-6fe2-441c-8c8c-71466251a162

they are reported as DRIVE_REMOVABLE by win32.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7010 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7009 c046a42c-6fe2-441c-8c8c-71466251a162

A const function only reads its arguments and does not use TCG
globals variables. Hence a call to such a function does not
save TCG globals variabes back to their canonical location.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7008 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7007 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7006 c046a42c-6fe2-441c-8c8c-71466251a162

This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.

Add monitor command to enable or disable single step mode.

Modify monitor command "info status" to display single step mode.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162

The beginning of the register allocation order list on the TCG x86_64
target matches the list of clobbered registers. This means that when an
helper is called, there is almost always clobbered registers that have
to be spilled.

The same way register %rsi and %rdi are at the top of the register
allocation order list, while they can't be used for load/store
operations. This means the data and/or address registers are very often
%rsi and %rdi, and their values have to be spilled, and then moved back
to another register.

This patches changes to the allocation order to avoid those effects.
It results in a 8% gain speed in qemu-x86_64 to compress a bzip2 file,
and a 6% gain in qemu-system-mips64 to compile a small application.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7003 c046a42c-6fe2-441c-8c8c-71466251a162

If there is still work to do, it is not safe to assume we
can end the dirty tracking. Specifically, kvm can update the dirty
tracking log inside ram_save_block(), leaving pages still out of sync
if we go with the current code.

Based on a patch by Yaniv Kamay
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6999 c046a42c-6fe2-441c-8c8c-71466251a162

This is mainly for consistency, since we don't want
anything outside of savevm setting it explicitly. There
are current no users of that in qemu tree, but there
are potential candidates on kvm-userspace. And avi
is a nice guy, let's be nice with him.

Based on a patch by Yaniv Kamay
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6998 c046a42c-6fe2-441c-8c8c-71466251a162

migrate_fd_put_ready() calls qemu_savevm_state_complete(),
but the later can fail.

If it happens, re-start the vm and propagate the error up

Based on a patch by Yaniv Kamay
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6997 c046a42c-6fe2-441c-8c8c-71466251a162

It breaks the build.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6996 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6995 c046a42c-6fe2-441c-8c8c-71466251a162

We now enforce that you cannot write beyond the end of a non-growable file.
qcow2 files are not growable but we rely on them being growable to do
savevm/loadvm.  Temporarily allow them to be growable by introducing a new
API specifically for savevm read/write operations.

Reported-by: malc
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6994 c046a42c-6fe2-441c-8c8c-71466251a162

This was reported by malc.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6993 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce a more canonical gdbstub configuration (system emulation only)
via the new switch '-gdb dev'. Keep '-s' as shorthand for
'-gdb tcp::1234'. Use the same syntax also for the corresponding monitor
command 'gdbserver'. Its default remains to listen on TCP port 1234.

Changes in v4:
 - Rebased over new command line switches meta file

Changes in v3:
 - Fix documentation

Changes in v2:
 - Support for pipe-based like to gdb (target remote | qemu -gdb stdio)
 - Properly update the qemu-doc
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162

On Windows default screen width for the command prompt (A.K.A. "DOS
window") is 80 chars. `-icount' help is 87 chars wide. So make it fit.
Signed-off-by: NRobert Riebisch <rr@bttr-software.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6991 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds a new qemu-io tool that links against the block layer and
image formats and allow to exercise them without needing a guest image.
It is inspired by the xfs_io tool which does the same for plain file I/O.
In fact the libxcmd library which is the backend of xfs_io is reused by this
tool in a limited fashing (cmd.[ch] files).

This version tests out most of the plain block I/O commands with the
most notable absent commands beeing snapshot handling and real aio.

This tool is the basis of the I/O path test suite I'm working on right now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6990 c046a42c-6fe2-441c-8c8c-71466251a162

When the vga resolution changes, a new display surface is not allocated
immediately; instead that is deferred until the next update.  However,
if we're running without a display client attached, that won't happen
and the next bitblt is likely to cause a segfault by overflowing the
display surface.

Fix by reallocating the display immediately when the resolution changes.

Tested with (Windows|Linux) x (cirrus|std) x (curses|sdl).

Changes from v1:
 - fix segfault when switching virtual consoles with curses
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6989 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6984 c046a42c-6fe2-441c-8c8c-71466251a162

Currently qemu unconditionally strips binaries on install. This
is a problem for packagers who may want to store/ship debug symbols
of compiled packages for debugging purposes.

Keep stripping as default for the oldtimers and add a
 --disable-strip flag to override.
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6983 c046a42c-6fe2-441c-8c8c-71466251a162

When creating large disk images w/ qcow2 format, qcow2_create is hard
coded to creating a single refcount block.  This is insufficient for
large images, and will cause qemu-img to segfault as it walks off the
end of the refcount block.  Keep track of the space needed during image
create and create proper number of refcount blocks accordingly.

https://bugzilla.redhat.com/show_bug.cgi?id=491943Signed-off-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6982 c046a42c-6fe2-441c-8c8c-71466251a162

This fixes:

 - The error message to show the actual if= argument value. It was showing
   the filename instead, because 'buf' is reaused on the filename parsing.
 - A bug that makes a block device to be created even when an unsupported if= arg
   is passed to pci_add.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6981 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6980 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6979 c046a42c-6fe2-441c-8c8c-71466251a162

This patch allows the use a host_device as the destination for "qemu-img
convert".

I added a ->bdrv_create function host_device.  It merely verifies that
the device exists and is large enough.

A check is needed in the qemu-img convert loop to ensure that we write
out all 0 sectors to the host_device.  Otherwise they end up with stale
garbage where all zero sectors were expected.

I also made the check against bdrv_is_allocated enabled for everything
_except_ host devices, since there is no point in making the block
backend write a bunch of zeros just so that we can memcmp them
immediately afterwards.  Host devices can't benefit from this because
there is no way to differentiate between a sector being unallocated
because it was never written, or because it was written with all zeros
and then made a trip through qemu-img convert.

Finally, there is an unrelated fix for a typo in the error message
printed if the destination device does not support ->bdrv_create.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6978 c046a42c-6fe2-441c-8c8c-71466251a162

qcow2's get_cluster_offset() scans forward in the l2 table to find other
clusters that have the same allocation status as the first cluster.
This is used by (among others) qcow_is_allocated().

Unfortunately, it was not checking to be sure that it didn't fall off
the end of the l2 table.  This patch adds that check.

The symptom that motivated me to look into this was that
bdrv_is_allocated() was returning false when there was in fact data
there.  This is one of many ways this bug could lead to data corruption.

I checked the other place that scans for consecutive unallocated blocks
(alloc_cluster_offset()) and it appears to be OK:
    nb_clusters = MIN(nb_clusters, s->l2_size - l2_index);
appears to prevent the same problem from occurring.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6977 c046a42c-6fe2-441c-8c8c-71466251a162