Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 Advanced SIMD VRINTX instruction.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 floating-point VRINTX instruction.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 floating-point VRINTZ instruction.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the AArch32 floating-point VRINTR instruction.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for AArch32 ARMv8 FP VRINTA, VRINTN, VRINTP and VRINTM
instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.

The changes in semantics for the variables are:
 exclusive_addr  -> extended to 64 bits; -1ULL for "monitor lost",
   otherwise always < 2^32 for AArch32
 exclusive_val   -> extended to 64 bits. 64 bit exclusives in AArch32 now
   use the high half of exclusive_val instead of a separate exclusive_high
 exclusive_high  -> is no longer used in AArch32; extended to 64 bits as
   it will be needed for AArch64's pair-of-64-bit-values exclusives.
 exclusive_test  -> extended to 64 bits, as it is an address. Since this is
   a linux-user-only field, in arm-linux-user it will always have the top
   32 bits zero.
 exclusive_info  -> stays 32 bits, as it is neither data nor address, but
   simply holds register indexes etc. AArch64 will be able to fit all its
   information into 32 bits as well.

Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The VFP conversion helpers for A32 round to zero as this is the only
rounding mode supported. Rename these helpers to make it clear that
they round to zero and are not suitable for use in the AArch64 code.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Use the VFP_BINOP macro to provide helpers for min, max, minnum
and maxnum, rather than hand-rolling them. (The float64 max
version is not used by A32 but will be needed for A64.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.

The changes in semantics for the variables are:
 exclusive_addr  -> extended to 64 bits; -1ULL for "monitor lost",
   otherwise always < 2^32 for AArch32
 exclusive_val   -> extended to 64 bits. 64 bit exclusives in AArch32 now
   use the high half of exclusive_val instead of a separate exclusive_high
 exclusive_high  -> is no longer used in AArch32; extended to 64 bits as
   it will be needed for AArch64's pair-of-64-bit-values exclusives.
 exclusive_test  -> extended to 64 bits, as it is an address. Since this is
   a linux-user-only field, in arm-linux-user it will always have the top
   32 bits zero.
 exclusive_info  -> stays 32 bits, as it is neither data nor address, but
   simply holds register indexes etc. AArch64 will be able to fit all its
   information into 32 bits as well.

Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The cpregs APIs used by the decoder (get_arm_cp_reginfo() and
cp_access_ok()) currently take either a CPUARMState* or an ARMCPU*.
This is problematic for the A64 decoder, which doesn't pass the
environment pointer around everywhere the way the 32 bit decoder
does. Adjust the parameters these functions take so that we can
copy only the relevant info from the CPUARMState into the
DisasContext and then use that.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
          reused arm infrastructure for checking the flags]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
 * conditionally executed instructions
 * Thumb IT blocks
 * kernel helper page
 * M profile exception-exit special casing

None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.

Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds support for the AESE/AESD/AESMC/AESIMC instructions that
are available on some v8 implementations of Aarch32.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1386266078-6976-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Retain the existing gen_aa32_* inlines, to aid compilation for A64.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1386628626-21627-1-git-send-email-rth@twiddle.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds support for the ARMv8 Advanced SIMD VMAXNM and VMINNM
instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Message-id: 1386158099-9239-7-git-send-email-will.newton@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds support for the ARMv8 floating point VMAXNM and VMINNM
instructions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-6-git-send-email-will.newton@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds support for the VSEL floating point selection instruction
which was added in ARMv8.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-3-git-send-email-will.newton@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Floating point is an extension to the instruction set rather than
a coprocessor, so call it directly from the ARM and Thumb decode
functions.
Signed-off-by: NWill Newton <will.newton@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1386158099-9239-2-git-send-email-will.newton@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

No longer needs to be done on a per-target basis.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode,
registers look vastly different, instruction encoding is completely different,
basically the system turns into a different machine.

So let's do a simple if() in translate.c to decide whether we can handle the
current code in the legacy AArch32 code or in the new AArch64 code.

So far, the translation always complains about unallocated instructions. There
is no emulator functionality in this patch!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org
[PMM:
 * provide no-op versions of a64 functions ifndef TARGET_AARCH64;
   this lets us avoid #ifdefs in translate.c
 * insert the missing call to disas_a64_insn()
 * stash the insn in the DisasContext rather than reloading it in
   real_unallocated_encoding()
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds all the prerequisites for AArch64 support that didn't
fit into split up patches. It extends important bits in the core cpu
headers to also take AArch64 mode into account.

Add new ARM_TBFLAG_AARCH64_STATE translation buffer flag
indicate an ARMv8 cpu running in aarch64 mode vs aarch32 mode.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-10-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-4-git-send-email-john.rigby@linaro.org
[PMM:
 * rearranged tbflags so AArch64? is bit 31 and if it is set then
  30..0 are freely available for whatever makes most sense for that mode
 * added version bump since we change VFP migration state
 * added a comment about how VFP/Neon register state works
 * physical address space is 48 bits, not 64
 * added ARM_FEATURE_AARCH64 flag to identify 64-bit capable CPUs
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We want gen_set_pc_im() to work for both AArch64 and AArch32, but
to do this we'll need the DisasContext* so we can tell which mode
we're in, so pass it in as a parameter.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-7-git-send-email-peter.maydell@linaro.org

Correct a few places that were using uint32_t or a 32 bit
only format string to handle something that should be a target_ulong.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-6-git-send-email-peter.maydell@linaro.org
[PMM: split out to separate patch; added gen_goto_tb() and
gen_set_pc_im() dest params to list of things to change.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The cpu_env tcg variable will be used by both the AArch32 and AArch64
handling code. Unstaticify it, so that both sides can make use of it.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-5-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-3-git-send-email-john.rigby@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We will need to share the disassembly status struct between AArch32 and
AArch64 modes. So put it into a header file that both sides can use.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-4-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-2-git-send-email-john.rigby@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

AArch32 code (ie traditional 32 bit world) expects to be
able to pass a vaddr in a TCGv_i32. However when QEMU is
compiled with TARGET_LONG_BITS=32 the TCG load/store
functions take a TCGv_i64. Abstract out load/store with
a 32 bit vaddr so we have a place to put the zero extension
of the vaddr and the extension/truncation of the data value.

Apart from the function definitions most of this patch is
a simple s/tcg_gen_qemu_/gen_aa32_/.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-3-git-send-email-peter.maydell@linaro.org

In the decode of ARM B and BL insns, swap the order of the
"append 2 implicit zeros to imm24" and the sign extend, and
use the new sextract32() utility function to do the latter.
This avoids a direct dependency on the undefined C behaviour
of shifting into the sign bit of an integer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-id: 1378391908-22137-2-git-send-email-peter.maydell@linaro.org

And update all users.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

These unimplemented opcodes are handled like illegal opcodes, but
they are used in existing code. We should at least report when they
are executed.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org

Prepares for changing cpu_single_step() argument to CPUState.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The ARMv8 SEVL instruction is in the architectural hint space already
emulated as nop.  This makes the decoding of SEVL explicit for clarity.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Message-id: 1370606786-5650-3-git-send-email-mans@mansr.com
[PMM: added 'SEVL' to the TODO comment]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds support for the ARMv8 load acquire/store release instructions.
Since qemu does nothing special for memory barriers, these can be
emulated like their non-acquire/release counterparts.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMans Rullgard <mans@mansr.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>