The xscmpodp and xscmpudp instructions only have the AX, BX bits in
there encoding, the lowest bit (usually TX) is marked as an invalid
bit. We therefore can't decode them with GEN_XX2FORM, which decodes
the two lowest bit.

Introduce a new form GEN_XX2FORM, which decodes AX and BX and mark
the lowest bit as invalid.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

For vector instructions, the helpers get pointers to the vector register
in arguments. Some operands might point to the same register, including
the operand holding the result.

When emulating instructions which access the vector elements in a
non-linear way, we need to store the result in an temporary variable.

This fixes openssl when emulating a POWER8 CPU.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The current U-Boot binary in QEMU has a bug where it fails to support
dynamic CCSR addressing. Without this support, u-boot can not boot the
ppce500 machine anymore. This has been fixed upstream in u-boot commit
e834975b.

Update the u-boot blob we carry in QEMU to the latest u-boot upstream,
so that we can successfully run u-boot with the ppce500 machine again.

CC: qemu-stable@nongnu.org
Signed-off-by: NAlexander Graf <agraf@suse.de>
Tested-by: NThomas Huth <thuth@redhat.com>

We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:

. = 0x100
.globl _start
_start:
	/* Cause a 0x600 */
	li	3,0x1
	stwcx.	3,0,3
1:	b	1b

. = 0x600
1:	b	1b

Built into something we can load as a BIOS image:

gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin

Run with:

qemu-system-ppc64 -nographic -bios test.bin

Shows an incorrect SRR0 (points at the li):

SRR0 0000000000000100

With the patch we get the correct SRR0:

SRR0 0000000000000104
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

There is a bug in the register mask when reading
the ATMUs registers. As the result some registers
cannot be read, and read is aliased to the other
registers. Fix it.
Signed-off-by: NRudolf Marek <rudolf.marek@sysgo.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The code to flush the DBDMA channel was effectively duplicated in
dbdma_control_write(), except for the fact that the copy executed outside of a
RUN bit transition was broken by not clearing the FLUSH bit once the flush was
complete.

Newer PPC Linux kernels would timeout waiting for the FLUSH bit to clear again
after submitting a FLUSH command. Fix this by always clearing the FLUSH bit
once the channel flush is complete and removing the repeated code.
Reported-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

QEMU does have an I/O thread now, that can be interrupted at any time
because the VCPU thread runs outside the iothread mutex.

Therefore, the kvmppc_timer_hack is obsolete.  Remove it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

QOM infrastructure fixes and device conversions

* QOM API error handling fixes
* Performance improvements for device GPIO property creation
* Remaining conversion of QEMUMachine to QOM

# gpg: Signature made Sat 19 Sep 2015 15:40:44 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (21 commits)
  machine: Eliminate QEMUMachine and qemu_register_machine()
  Revert use of DEFINE_MACHINE() for registrations of multiple machines
  Use DEFINE_MACHINE() to register all machines
  mac_world: Break long line
  machine: DEFINE_MACHINE() macro
  exynos4: Declare each QEMUMachine as a separate variable
  exynos4: Use MachineClass instead of exynos4_machines array
  exynos4: Use EXYNOS4210_NCPUS instead of max_cpus on error message
  machine: Set MachineClass::name automatically
  machine: Ensure all TYPE_MACHINE subclasses have the right suffix
  mac99: Use MACHINE_TYPE_NAME to encode class name
  s390: Rename s390-ccw-virtio-2.4 class name to use MACHINE_TYPE_NAME
  s390-virtio: Rename machine class name to use MACHINE_TYPE_NAME
  pseries: Rename machine class names to use MACHINE_TYPE_NAME
  arm: Rename virt machine class to use MACHINE_TYPE_NAME
  vexpress: Rename machine classes to use MACHINE_TYPE_NAME
  vexpress: Don't set name on abstract class
  machine: MACHINE_TYPE_NAME macro
  qdev: Do not use slow [*] expansion for GPIO creation
  qom: Fix invalid error check in property_get_str()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The struct is not used anymore and can be eliminated.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The script used for converting from QEMUMachine had used one
DEFINE_MACHINE() per machine registered. In cases where multiple
machines are registered from one source file, avoid the excessive
generation of module init functions by reverting this unrolling.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Coding style change only.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The macro will allow easy registration of a TYPE_MACHINE subclass, using
only the machine name and a MachineClass initialization function as
parameter.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This will make the code follow the same pattern used for other machines,
and will make it easier to automatically convert the code to be
QOM-based.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

We don't need a QEMUMachine array to query max_cpus, if we can get the
corresponding MachineClass.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The code is checking smp_cpus against EXYNOS4210_NCPUS, not against
max_cpus, so use EXYNOS4210_NCPUS in the error message for consistency.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now that all non-abstract TYPE_MACHINE subclasses have the -machine
suffix, add an assert to ensure this will be always true.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It will result in exactly the same class name, but it will make the code
consistent with the other classes.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the
s390-ccw-virtio-2.4 machine class using the MACHINE_TYPE_NAME macro.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
[AF/ehabkost: Updated for 2.5 machine]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the s390-virtio
machine class using the MACHINE_TYPE_NAME macro.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the the pseries
machine classes using the MACHINE_TYPE_NAME macro.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the arm virt
machine class using the MACHINE_TYPE_NAME macro.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Machine class names should use the "-machine" suffix to allow
class-name-based machine class lookup to work. Rename the vexpress
machine classes using the MACHINE_TYPE_NAME macro.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
[AF: Introduce VEXPRESS_*_MACHINE_NAME]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The MachineClass::name field won't be ever be used on TYPE_VEXPRESS, as
it is an abstract class and the machine class lookup code explicitly
skips abstract classes. We can remove it to make the code simpler.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The macro will be useful to ensure the machine class names follow the
right format to make machine class lookup by class name work correctly.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Expansion of [*] suffix is very slow because index expansion is done using
trial and error strategy, starting every time from zero and retrying with
the next index until insertion succeeds. With large number of already added
properties this process takes huge amount of time (O(n^2) complexity).

Some architectures (like ARM) use very large amount of IRQ pins in interrupt
controller models. This flaw makes machine startup extremely slow
(~20 seconds for ARM64 with 32 CPUs). This patch decreases this time down to
~10 seconds.

Also in qdev_init_gpio_out_named() memset() is now called only once for the
whole array instead of per-cell cleaning
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

When a function returns a null pointer on error and only on error, you
can do

    if (!foo(foos, errp)) {
        ... handle error ...
    }

instead of the more cumbersome

    Error *err = NULL;

    if (!foo(foos, &err)) {
        error_propagate(errp, err);
        ... handle error ...
    }

A StringProperty's getter, however, may return null on success!  We
then fail to call visit_type_str().

Screwed up in 6a146eba, v1.1.

Fails tests/qom-test in my current, heavily hacked QAPI branch.  No
reproducer for master known (but I didn't look hard).

Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The argument for an Error **errp parameter must point to a null
pointer.  If it doesn't, and an error happens, error_set() fails its
assertion.

Instead of

    foo(foos, errp);
    bar(bars, errp);

you need to do something like

    Error *err = NULL;

    foo(foos, &err);
    if (err) {
        error_propagate(errp, err);
        goto out;
    }

    bar(bars, errp);
out:

Screwed up in commit 0e558843 (v1.3.0): property_get_bool().

Screwed up in commit 1f21772d (v2.1.0): object_property_get_enum() and
object_property_get_uint16List().

Screwed up in commit a8e3fbed (v2.4.0): property_get_enum(),
property_set_enum().

Found by inspection, no actual crashes observed.

Fix them up.

Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Do not open a Cocoa window when another display is selected that will be
initialized later. The Cocoa display cannot be selected with -display,
so there is no need to check its argument.
Signed-off-by: NRainer Müller <raimue@codingfarm.de>
Reviewed-by: NAndreas Färber <andreas.faerber@web.de>
Message-id: 1441807710-25431-1-git-send-email-raimue@codingfarm.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Fri 18 Sep 2015 15:59:02 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  ahci: clean up initial d2h semantics
  ahci: remove cmd_fis argument from write_fis_d2h
  ahci: fix signature generation
  ahci: remove dead reset code
  atapi: abort transfers with 0 byte limits
  ide: fix ATAPI command permissions
  ide-test: add cdrom dma test
  ide-test: add cdrom pio test
  qtest/ahci: export generate_pattern
  qtest/ahci: use generate_pattern everywhere
  ide: unify io_buffer_offset increments
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

with write_fis_d2h and signature generation tidied up,
let's adjust the initial d2h semantics to make more sense.

The initial d2h is considered delivered if there is guest
memory to save it to.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1441140641-17631-5-git-send-email-jsnow@redhat.com

It's no longer used. We used to generate a D2H FIS based
upon the command FIS that prompted the update, but in reality,
the D2H FIS is generated purely from register state.

cmd_fis is vestigial, so get rid of it.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1441140641-17631-4-git-send-email-jsnow@redhat.com

The initial register device-to-host FIS no longer needs to specially
set certain fields, as these can be handled generically by setting those
fields explicitly with the signatures we want at port reset time.

(1) Signatures are decomposed into their four component registers and
    set upon (AHCI) port reset.
(2) the signature cache register is no longer set manually per-each
    device type, but instead just once during ahci_init_d2h.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1441140641-17631-3-git-send-email-jsnow@redhat.com

This check is dead due to an earlier conditional.
AHCI does not currently support hotplugging, so
checks to see if devices are present or not are useless.

Remove it.
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1441140641-17631-2-git-send-email-jsnow@redhat.com

We're supposed to abort on transfers like this, unless we fill
Word 125 of our IDENTIFY data with a default transfer size, which
we don't currently do.

This is an ATA error, not a SCSI/ATAPI one.
See ATA8-ACS3 sections 7.17.6.49 or 7.21.5.

If we don't do this, QEMU will loop forever trying to transfer
zero bytes, which isn't particularly useful.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1442253685-23349-2-git-send-email-jsnow@redhat.com

We're a little too lenient with what we'll let an ATAPI drive handle.
Clamp down on the IDE command execution table to remove CD_OK permissions
from commands that are not and have never been ATAPI commands.

For ATAPI command validity, please see:
- ATA4 Section 6.5 ("PACKET Command feature set")
- ATA8/ACS Section 4.3 ("The PACKET feature set")
- ACS3 Section 4.3 ("The PACKET feature set")

ACS3 has a historical command validity table in Table B.4
("Historical Command Assignments") that can be referenced to find when
a command was introduced, deprecated, obsoleted, etc.

The only reference for ATAPI command validity is by checking that
version's PACKET feature set section.

ATAPI was introduced by T13 into ATA4, all commands retired prior to ATA4
therefore are assumed to have never been ATAPI commands.

Mandatory commands, as listed in ATA8-ACS3, are:

- DEVICE RESET
- EXECUTE DEVICE DIAGNOSTIC
- IDENTIFY DEVICE
- IDENTIFY PACKET DEVICE
- NOP
- PACKET
- READ SECTOR(S)
- SET FEATURES

Optional commands as listed in ATA8-ACS3, are:

- FLUSH CACHE
- READ LOG DMA EXT
- READ LOG EXT
- WRITE LOG DMA EXT
- WRITE LOG EXT

All other commands are illegal to send to an ATAPI device and should
be rejected by the device.

CD_OK removal justifications:

0x06 WIN_DSM              Defined in ACS2. Not valid for ATAPI.
0x21 WIN_READ_ONCE        Retired in ATA5. Not ATAPI in ATA4.
0x94 WIN_STANDBYNOW2      Retired in ATA4. Did not coexist with ATAPI.
0x95 WIN_IDLEIMMEDIATE2   Retired in ATA4. Did not coexist with ATAPI.
0x96 WIN_STANDBY2         Retired in ATA4. Did not coexist with ATAPI.
0x97 WIN_SETIDLE2         Retired in ATA4. Did not coexist with ATAPI.
0x98 WIN_CHECKPOWERMODE2  Retired in ATA4. Did not coexist with ATAPI.
0x99 WIN_SLEEPNOW2        Retired in ATA4. Did not coexist with ATAPI.
0xE0 WIN_STANDBYNOW1      Not part of ATAPI in ATA4, ACS or ACS3.
0xE1 WIN_IDLEIMMDIATE     Not part of ATAPI in ATA4, ACS or ACS3.
0xE2 WIN_STANDBY          Not part of ATAPI in ATA4, ACS or ACS3.
0xE3 WIN_SETIDLE1         Not part of ATAPI in ATA4, ACS or ACS3.
0xE4 WIN_CHECKPOWERMODE1  Not part of ATAPI in ATA4, ACS or ACS3.
0xE5 WIN_SLEEPNOW1        Not part of ATAPI in ATA4, ACS or ACS3.
0xF8 WIN_READ_NATIVE_MAX  Obsoleted in ACS3. Not ATAPI in ATA4 or ACS.

This patch fixes a divide by zero fault that can be caused by sending
the WIN_READ_NATIVE_MAX command to an ATAPI drive, which causes it to
attempt to use zeroed CHS values to perform sector arithmetic.
Reported-by: NQinghao Tang <luodalongde@gmail.com>
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1441816082-21031-1-git-send-email-jsnow@redhat.com
CC: qemu-stable@nongnu.org

Now, test the DMA functionality of the ATAPI drive.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1441926555-19471-5-git-send-email-jsnow@redhat.com

Add a simple read test for ATAPI devices,
using the PIO mechanism.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1441926555-19471-4-git-send-email-jsnow@redhat.com

Share the pattern function for ide and ahci test.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1441926555-19471-3-git-send-email-jsnow@redhat.com