Split s390_sclp_configure() into separate functions for sclp
configuring and deconfiguring in order to make the code more readable.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

In reg_irqs(), present code assumes that map_indicator() always issues
successfully. Let's check it and return the error to caller in order to
inform guest.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Drop the DO_UPCAST macro
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1459237645-17227-7-git-send-email-zxq_yx_007@163.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Drop the DO_UPCAST macro
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1459237645-17227-6-git-send-email-zxq_yx_007@163.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We don't need to pass device address for pc-bios using gr7 anymore as
the pcbios completely relies on diag308 now, so we can remove it from
qemu. devno, ssid and cssid are migrated but the value was never reused,
so we can safely ignore these fields and migrate 0.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Contains the following change:

pc-bios/s390-ccw: Get device address via diag 308/6
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

To IPL from a device, pc-bios receives from qemu a device address via
general register 7. The better way to do it is to use diag308/6
instruction which returns so called
"IplParameterBlock". IplParameterBlock contains the device address for
IPL and additional parameters that can be used by pc-bios.

This patch allows pc-bios to get device address via diag308/6 and
doesn't use gr7 passed boot information anymore.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Add the ssid field to the ipl parameter block struct and fill it when
necessary so the guest can use it.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Right now we return the ipl parameter block only if the guest
specified one. Let's fill in the parameter block when bootindex
parameter is available and not booting from an external kernel.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We can check for valid type and lengths of the IplParameterBlock fields
when receiving the struct from the guest.

Length of the IplParameterBlock can be less than 4K. To play safe we can
read and write only required amount of data.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenband <dahi@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The IplParameterBlock struct currently has only 200 bytes filled, but it
can be up to 4K.

This patch converts the struct to union with a fully populated struct
inside it and second struct with old values.

For compatibility reasons we disable migration of the extended iplb
field for pre-2.7 machines. Also a guest still can read/write only the
first 200 bytes of IPLB for now.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Introduce run-time-instrumentation support when running under kvm for
virtio-ccw 2.7 machine and make sure older machines can not enable it.

The new ri_allowed field in the s390MachineClass serves as an indicator
whether the feature can be used by the machine and should therefore be
activated if available.

riccb_needed() is used to check whether riccb is needed or not in live
migration.
Signed-off-by: NFan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Also add some of the option cascading we were missing.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

# gpg: Signature made Tue 17 May 2016 01:19:39 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  rfifolock: no need to get thread identifier when nesting
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

slirp updates

# gpg: Signature made Mon 16 May 2016 20:22:36 BST using RSA key ID FB6B2F1D
# gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: F632 74CD C630 0873 CB3D  29D9 E3E5 1CE8 FB6B 2F1D

* remotes/thibault/tags/samuel-thibault:
  slirp: Clean up osdep.h related header inclusions
  slirp: Remove some unused code from slirp.h
  slirp: Remove obsolete backward-compatibility cruft
  slirp: Clean up slirp_config.h
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NChanglong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Message-id: 1462874348-32396-1-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qemu/osdep.h is included in some headers twice - one time
should be sufficient.
Also remove the inclusion of time.h since that is already
done by osdep.h, too (this makes scripts/clean-includes
happy again).
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

These hunks are apparently not used anymore, so let's delete them.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

The slirp code does not use index() and gethostid() anymore,
so these parts can be removed without problems.
memmove() and strerror() should be available on each of the
supported platforms nowadays, too, so these wrappers are also
not needed anymore.
And we certainly also do not support Ultrix anymore, so no
need to keep the code for this platform anymore.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

There are a lot of unused #defines / #undefs in slirp_config.h,
which are apparently left-overs from the very early slirp code.
Since there is no more code that uses them, let's simply remove
them from our version of slirp.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

gtk/sdl build tweaks
fix gtk 3.20 warnings
gtk clipboard support
spice-gl monitor config support
fix coverity warnings

# gpg: Signature made Fri 13 May 2016 13:30:39 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ui-20160513-1:
  gtk: don't leak the GtkBorder with VTE 0.36
  gtk: update grab code for gtk 3.20
  spice: fix coverity complains
  egl-helpers: fix possible resource leak
  Changed malloc to g_malloc, free to g_free in ui/shader.c
  spice/gl: add & use qemu_spice_gl_monitor_config
  ui/gtk: copy to clipboard support
  ui: gtk: Fix some deprecation warnings
  ui: gtk: Fix a runtime warning on vte >= 0.37
  configure: support vte-2.91
  configure: report SDL version
  configure: report GTK version
  configure: add echo_version helper
  configure: error on unknown --with-sdlabi value
  configure: build SDL if only SDL2 available
  ui: sdl2: Release grab before opening console window
  ui: gtk: fix crash when terminal inner-border is NULL
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS patches 2016-05-13

Changes:
* fix zeroing CP0.WatchLo registers in soft reset
* QOMify Jazz led

# gpg: Signature made Fri 13 May 2016 11:04:04 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20160513:
  hw/display: QOM'ify jazz_led.c
  target-mips: fix call to memset in soft reset code
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When gtk_widget_style_get() is used to get the "inner-border" style
property, it returns a copy of the GtkBorder which must be freed by
the caller.

This patch also fixes a warning about the unused 'padding' structure
with VTE 0.36.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Message-id: 1463127654-5171-1-git-send-email-berto@igalia.com
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>

[ kraxel: adapted to changes in ui patch queue ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

queued 2.7 patches

# gpg: Signature made Fri 13 May 2016 01:08:20 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20160512: (39 commits)
  cpu-exec: Clean up 'interrupt_request' reloading in cpu_handle_interrupt()
  cpu-exec: Remove unused 'x86_cpu' and 'env' from cpu_exec()
  cpu-exec: Move TB execution stuff out of cpu_exec()
  cpu-exec: Move interrupt handling out of cpu_exec()
  cpu-exec: Move exception handling out of cpu_exec()
  cpu-exec: Move halt handling out of cpu_exec()
  cpu-exec: Remove relic orphaned comment
  tcg: Remove needless CPUState::current_tb
  cpu-exec: Move TB chaining into tb_find_fast()
  tcg: Rework tb_invalidated_flag
  tcg: Clean up from 'next_tb'
  cpu-exec: elide more icount code if CONFIG_USER_ONLY
  tcg: reorganize tb_find_physical loop
  tcg: code_bitmap and code_write_count are not used by user-mode emulation
  tcg: Allow goto_tb to any target PC in user mode
  tcg: Clean up direct block chaining safety checks
  tcg: Clean up tb_jmp_unlink()
  tcg: Extract removing of jumps to TB from tb_phys_invalidate()
  tcg: Rename tb_jmp_remove() to tb_remove_from_jmp_list()
  tcg: Clarify thread safety check in tb_add_jump()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Drop the old SysBus init function and use instance_init
* Move graphic_console_init into realize stage
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Suggested-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1463071937-26607-1-git-send-email-sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1462962111-32237-6-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Simplify cpu_exec() by extracting TB execution code outside of
cpu_exec() into a new static inline function cpu_loop_exec_tb().
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1462962111-32237-5-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Simplify cpu_exec() by extracting interrupt handling code outside of
cpu_exec() into a new static inline function cpu_handle_interrupt().
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Message-Id: <1462962111-32237-4-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Simplify cpu_exec() by extracting exception handling code out of
cpu_exec() into a new static inline function cpu_handle_exception().
Also make cpu_handle_debug_exception() inline as it is used only once.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1462962111-32237-3-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Simplify cpu_exec() by extracting CPU halt state handling code out of
cpu_exec() into a new static inline function cpu_handle_halt().
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1462962111-32237-2-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This comment should have been deleted by commit 0ac087f1 ("removed
unused code") but somehow it is still here. There's no point to keep it.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1462286050-21778-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This field was used for telling cpu_interrupt() to unlink a chain of TBs
being executed when it worked that way. Now, cpu_interrupt() don't do
this anymore. So we don't need this field anymore.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1462273462-14036-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Move tb_add_jump() call and surrounding code from cpu_exec() into
tb_find_fast(). That simplifies cpu_exec() a little by hiding the direct
chaining optimization details into tb_find_fast(). It also allows to
move tb_lock()/tb_unlock() pair into tb_find_fast(), putting it closer
to tb_find_slow() which also manipulates the lock.
Suggested-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
[rth: Fixed rebase typo in nochain test.]

'tb_invalidated_flag' was meant to catch two events:
 * some TB has been invalidated by tb_phys_invalidate();
 * the whole translation buffer has been flushed by tb_flush().

Then it was checked:
 * in cpu_exec() to ensure that the last executed TB can be safely
   linked to directly call the next one;
 * in cpu_exec_nocache() to decide if the original TB should be provided
   for further possible invalidation along with the temporarily
   generated TB.

It is always safe to patch an invalidated TB since it is not going to be
used anyway. It is also safe to call tb_phys_invalidate() for an already
invalidated TB. Thus, setting this flag in tb_phys_invalidate() is
simply unnecessary. Moreover, it can prevent from pretty proper linking
of TBs, if any arbitrary TB has been invalidated. So just don't touch it
in tb_phys_invalidate().

If this flag is only used to catch whether tb_flush() has been called
then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using
only 'true' and 'false' to set its value. Also, instead of setting it in
tb_gen_code(), just after tb_flush() has been called, do it right inside
of tb_flush().

In cpu_exec(), this flag is used to track if tb_flush() has been called
and have made 'next_tb' (a reference to the last executed TB) invalid
for linking it to directly call the next TB. tb_flush() can be called
during the CPU execution loop from tb_gen_code(), during TB execution or
by another thread while 'tb_lock' is released. Catch for translation
buffer flush reliably by resetting this flag once before first TB lookup
and each time we find it set before trying to add a direct jump. Don't
touch in in tb_find_physical().

Each vCPU has its own execution loop in multithreaded mode and thus
should have its own copy of the flag to be able to reset it with its own
'next_tb' and don't affect any other vCPU execution thread. So make this
flag per-vCPU and move it to CPUState.

In cpu_exec_nocache(), we only need to check if tb_flush() has been
called from tb_gen_code() called by cpu_exec_nocache() itself. To do
this reliably, preserve the old value of the flag, reset it before
calling tb_gen_code(), check afterwards, and combine the saved value
back to the flag.

This patch is based on the patch "tcg: move tb_invalidated_flag to
CPUState" from Paolo Bonzini <pbonzini@redhat.com>.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The value returned from tcg_qemu_tb_exec() is the value passed to the
corresponding tcg_gen_exit_tb() at translation time of the last TB
attempted to execute. It is a little confusing to store it in a variable
named 'next_tb'. In fact, it is a combination of 4-byte aligned pointer
and additional information in its two least significant bits. Break it
down right away into two variables named 'last_tb' and 'tb_exit' which
are a pointer to the last TB attempted to execute and the TB exit
reason, correspondingly. This simplifies the code and improves its
readability.

Correct a misleading documentation comment for tcg_qemu_tb_exec() and
fix logging in cpu_tb_exec(). Also rename a misleading 'next_tb' in
another couple of places.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[Alex Bennée: #ifndef replay code to match elided functions]
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Put some comments and improve code structure. This should help reading
the code.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov: provide commit message; bring back resetting of
tb_invalidated_flag]
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[Sergey Fedorov: eliminate the field entirely in user-mode]
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
[rth: merged followup fixup]
Message-Id: <1462982777-4513-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>