- 05 2月, 2014 2 次提交
-
-
由 Igor Mammedov 提交于
enable_device() and disable_device() functions aren't reused anywere, so replace them with respective oneliners at call sites. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
PIIX created a made-up value for the UP register since it was read by guest 32 times for each interrupt. There's no reason to do this for the new PCIHP: register is only read once for each interrupt, so clean up code by making read act as an interrupt acknowledgement: the new UP register clear on read. In this way we cut down the number of bus rescans by a factor of 32, and drop a bunch of code that's now unused. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 26 1月, 2014 5 次提交
-
-
由 Igor Mammedov 提交于
use C headers defines as source of IO base/len for respective values in ASL code. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
.. use IO port 0cd8-0xcf7 range for CPU present bitmap Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
.. so it could be used for adding CPU hotplug to Q35 machine Add an additional header with that will be shared between C and ASL code: include/hw/acpi/cpu_hotplug_defs.h Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
Add support for acpi pci hotplug using the new infrastructure. PIIX4 legacy interface is maintained as is for machine types 1.7 and older. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
Add ACPI based PCI hotplug library with bridge hotplug support. Design - each bus gets assigned "bsel" property. - ACPI code writes this number to a new BNUM register, then uses existing UP/DOWN registers to probe slot status; to eject, write number to BNUM register, then slot into existing EJ. The interface is actually backwards-compatible with existing PIIX4 ACPI (though not migration compatible). This is split out from PIIX4 codebase so we can reuse it for Q35 as well. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 12月, 2013 5 次提交
-
-
由 Igor Mammedov 提交于
it fixes IRQ storm since guest isn't able to lower SCI IRQ after it has been handled when it clears GPE event. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
... and rename it into acpi_update_sci() since it changes SCI on only on PM registers status. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Igor Mammedov 提交于
Hardcoded GPE0 mask isn't really needed. Since GPE0_STS initialized with all bits cleared and only QEMU itself can set bits there (i.e. guest can only clear bits in it). So guest can't triger SCI by setting _STS & _EN bits and there is not reason to mask out not supported _STS bits since they shouldn't be set by QEMU in the first place. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Markus Armbruster 提交于
A PIIX3/PIIX4 southbridge has multiple functions. We model each function as a separate qdev. Two of them need some special wiring set up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0, and the SMBus controller at 01.3. The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has always had cannot_instantiate_with_device_add_yet set, but there is no obvious reason why device_add could not work for them. Drop it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Markus Armbruster 提交于
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dade. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 06 11月, 2013 3 次提交
-
-
由 Peter Maydell 提交于
Replace the legacy le16_to_cpupu() with lduw_le_p(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Message-id: 1383669517-25598-4-git-send-email-peter.maydell@linaro.org Signed-off-by: NAnthony Liguori <aliguori@amazon.com>
-
由 Peter Maydell 提交于
Replace the legacy cpu_to_le16wu() with stw_le_p(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Message-id: 1383669517-25598-2-git-send-email-peter.maydell@linaro.org Signed-off-by: NAnthony Liguori <aliguori@amazon.com>
-
由 Stefan Hajnoczi 提交于
The qdev_free() function name is misleading since all the function does is unlink the device from its parent. The device is not necessarily freed. The device will be freed when its QObject refcount reaches zero. It is usual for the parent (bus) to hold the final reference but there are cases where something else holds a reference so "free" is a misleading name. Call object_unparent(obj) directly instead of having a qdev wrapper function. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 14 10月, 2013 4 次提交
-
-
由 Michael S. Tsirkin 提交于
Also add a new API to install builtin tables, so that we can distinguish between the two. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
This adds APIs that will be used to fill in acpi tables, implemented using QOM, to various ich9 components. Some information is still missing in QOM, so we fall back on lookups by type instead. Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Tested-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Tested-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
This adds APIs that will be used to fill in guest acpi tables. Some required information is still lacking in QOM, so we fall back on lookups by type and returning explicit types. Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Tested-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Tested-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Tested-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Tested-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 26 9月, 2013 1 次提交
-
-
由 Liu, Jinsong 提交于
Currently Xen hvm s3 has a bug coming from the difference between qemu-traditioanl and qemu-xen. For qemu-traditional, the way to resume from hvm s3 is via 'xl trigger' command. However, for qemu-xen, the way to resume from hvm s3 inherited from standard qemu, i.e. via QMP, and it doesn't work under Xen. The root cause is, for qemu-xen, 'xl trigger' command didn't reset devices, while QMP didn't unpause hvm domain though they did qemu system reset. We have two qemu patches and one xl patch to fix Xen hvm s3 bug. This patch is the qemu patch 1. It adjusts qemu wakeup so that Xen s3 resume logic (which will be implemented at qemu patch 2) will be notified after qemu system reset. Signed-off-by: NLiu Jinsong <jinsong.liu@intel.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NAnthony PERARD <anthony.perard@citrix.com>
-
- 15 9月, 2013 1 次提交
-
-
由 Michael S. Tsirkin 提交于
io base register at 0x40 is cleared on reset, but io is not disabled until some other event happens to call pm_io_space_update. Invoke pm_io_space_update directly to make this consistent. Cc: qemu-stable@nongnu.org Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 03 9月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
It was introduced to loop over CPUs from target-independent code, but since commit 182735ef target-independent CPUState is used. A loop can be considered more efficient than function calls in a loop, and CPU_FOREACH() hides implementation details just as well, so use that instead. Suggested-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 23 8月, 2013 2 次提交
-
-
由 Alex Bligh 提交于
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: NAlex Bligh <alex@alex.org.uk> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Alex Bligh 提交于
Rearrange timer.h so it is in order by function type. Make legacy functions call non-legacy functions rather than vice-versa. Convert cpus.c to use new API. Signed-off-by: NAlex Bligh <alex@alex.org.uk> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 23 7月, 2013 2 次提交
-
-
由 Andreas Färber 提交于
Replace direct uses of PIIX4PMState::dev with QOM casts and rename it to parent_obj. Acked-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Crosthwaite 提交于
Define and use standard QOM cast macro. Remove usages of DO_UPCAST() and direct -> style upcasting. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 04 7月, 2013 4 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This new API will avoid having too many memory_region_ref/unref in paths that currently use memory_region_find. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jan Kiszka 提交于
Open-code isa_is_ioport_assigned via a memory region lookup. As all IO ports are now directly or indirectly registered via the memory API, this becomes possible and will finally allow us to drop the ioport tables. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 14 6月, 2013 1 次提交
-
-
由 Hu Tao 提交于
And use PRIxxx macros if possible. Signed-off-by: NHu Tao <hutao@cn.fujitsu.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 02 6月, 2013 1 次提交
-
-
由 Laszlo Ersek 提交于
Currently some places use pointer-to-void even though they mean pointer-to-FWCfgState. Clean them up. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 14 5月, 2013 1 次提交
-
-
由 Gerd Hoffmann 提交于
Otherwise the guest can crash qemu (NULL pointer dereference). https://bugzilla.redhat.com/show_bug.cgi?id=947691Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1368534544-11826-1-git-send-email-kraxel@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 5月, 2013 1 次提交
-
-
由 Igor Mammedov 提交于
* introduce processor status bitmask visible to guest at 0xaf00 addr, where ACPI asl code expects it * set bit corresponding to APIC ID in processor status bitmask on receiving CPU hot-plug notification * trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 25 4月, 2013 1 次提交
-
-
由 Hu Tao 提交于
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1366799842-18550-1-git-send-email-hutao@cn.fujitsu.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 4月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Prepare the new directory structure. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-