- 28 1月, 2010 4 次提交
-
-
由 Igor V. Kovalenko 提交于
sparc64 timer has tick counter which can be set and read, and tick compare value used as deadline to fire timer interrupt. The timer is not used as periodic timer, instead deadline is set each time new timer interrupt is needed. v3 -> v4: - coding style v2 -> v3: - added missing timer debug output macro - CPUTimer struct and typedef moved to cpu.h - change CPU_SAVE_VERSION to 6, older save formats not supported v1 -> v2: - new conversion helpers cpu_to_timer_ticks and timer_to_cpu_ticks - save offset from clock source to implement cpu_tick_set_count - renamed struct sun4u_timer to CPUTimer - load and save cpu timers v0 -> v1: - coding style Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
- correctly fit to cwp if provided window number is out of range Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
<sys/wait.h> must be included in order to use WIF* macros. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Anthony Liguori 提交于
Commit ec229bbe7 broke invocation without a specific -hda. IOW, qemu foo.img. The lack of an optind update caused an infinite loop. Reported-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 1月, 2010 36 次提交
-
-
由 Edgar E. Iglesias 提交于
Buffer block writes to avoid flushing every word access onto backing storage device. This significantly speeds up flash emulation for flashes connected through an 8 or 16-bit bus combined with backing storage (-pflash). Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>
-
由 Adam Litke 提交于
When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Adam Litke 提交于
Qemu has a number of commands that can operate asynchronously (savevm, migrate, etc) and it will be getting more. For these commands, the user monitor needs to be suspended, but QMP monitors could continue to to accept other commands. This patch introduces a new command API that isolates the details of handling different monitor types from the actual command execution. A monitor command can use this API by implementing the mhandler.cmd_async handler (or info_async if appropriate). This function is responsible for submitting the command and does not return any data although it may raise errors. When the command completes, the QMPCompletion callback should be invoked with its opaque data and the command result. The process for submitting and completing an asynchronous command is different for QMP and user monitors. A user monitor must be suspended at submit time and resumed at completion time. The user_print() function must be passed to the QMPCompletion callback so the result can be displayed properly. QMP monitors are simpler. No submit time setup is required. When the command completes, monitor_protocol_emitter() writes the result in JSON format. This API can also be used to implement synchronous commands. In this case, the cmd_async handler should immediately call the QMPCompletion callback. It is my hope that this new interface will work for all commands, leading to a drastically simplified monitor.c once all commands are ported. Signed-off-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
If we go over the maximum number of iovecs support by syscall we get back EINVAL from the kernel which translate to I/O errors for the guest. Add a MAX_IOV defintion for platforms that don't have it. For now we use the same 1024 define that's used on Linux and various other platforms, but until the windows block backend implements some kind of vectored I/O it doesn't matter. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefano Stabellini 提交于
Hi all, this patch fixes another bug in vnc_refresh: calling vnc_update_client might cause vs to be free()ed, in this case we cannot access vs->next right after to examine the next item on the list. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
This shouldn't happen under any normal circumstances. However, it looks like it's possible to achieve this with corrupted images. Without this patch raw_pread is hanging in an endless loop in such cases. The patch is not affecting growable files, for which such reads happen in normal use cases. raw_pread_aligned already handles these cases and won't return zero in the first place. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Herve Poussineau 提交于
Win32 suffers from a very big memory leak when dealing with SCSI devices. Each read/write request allocates memory with qemu_memalign (ie VirtualAlloc) but frees it with qemu_free (ie free). Pair all qemu_memalign() calls with qemu_vfree() to prevent such leaks. Signed-off-by: NHerve Poussineau <hpoussin@reactos.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Herve Poussineau 提交于
Toggle full screen on Win32/SDL 1.2.13 was broken by commit c18a2c36. Re-add the call to do_sdl_resize() which was removed in this revision Signed-off-by: NHerve Poussineau <hpoussin@reactos.org> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
Aborting without an error message when memory is short is not helpful, so print the reason for the abort. Try qemu -m 1000000 or qemu -m 2000 (win32) to force an out-of-memory error. v2: * Fix error message for win32. * Fix error message for posix_memalign. Thanks to malc for the hints. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
PCI bridges' qdev info structures must indicate bridge header type, otherwise critical bridge registers (esp. PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Marcelo Tosatti 提交于
savevm without id or tag segfaults in: (gdb) bt #0 0x00007f600a83bf8a in __strcmp_sse42 () from /lib64/libc.so.6 #1 0x00000000004745b6 in bdrv_snapshot_find (bs=<value optimized out>, sn_info=0x7fff996be280, name=0x0) at savevm.c:1631 #2 0x0000000000475c80 in del_existing_snapshots (name=<value optimized out>, mon=<value optimized out>) at savevm.c:1654 #3 do_savevm (name=<value optimized out>, mon=<value optimized out>) Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
The n member is not very descriptive and very hard to grep, rename it to cur_nr_sectors to better indicate what it is used for. Also rename nb_sectors to remaining_sectors as that is what it is used for. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
The BDRV_O_CREAT option is unused inside qemu and partially duplicates the bdrv_create method. Remove it, and the -C option to qemu-io which isn't used in qemu-iotests anyway. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christoph Hellwig 提交于
Check the whitelist as early as possible instead of continuing the setup, and move all the error handling code to the end of the function. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
These hunks got dropped off mysteriously during the rebasing of my virtio-serial series. Thanks go to Markus for noticing it. Without these fixes, -virtioconsole doesn't actually have any effect. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Reported-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
This file was renamed to ease the reviews of the recent changes that went in. Now that the changes are done, rename the file back to its original name. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
This patch improves Anthony patch a6a853c8 Once there, it improves handling of object files for qemu tools cc: Andreas Färber <andreas.faerber@web.de> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Marcelo Tosatti 提交于
If migration takes place between write of the bmdma address register and write of the command register (to initiate DMA), the destination will not properly start the DMA op, hanging the guest: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:16:41:00:00/00:00:00:00:00/e0 tag 0 dma 11264 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } Fix by sending current transfer information in the migration data. We need to update ide version to 4 for this to work. As we don't have subsectios, we need to chain the update increase until vmstate_ide_pci (quintela) Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
This commit completes the do_pci_info() conversion to QObject by adding support to PCI bridge devices. This is done by recursively adding devices in the "pci_bridge" key. IMPORTANT: This code is being added separately because I could NOT test it properly. According to Michael Tsirkin, it depends on ultrasparc and it would take time to do the proper setup. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
The returned QObject is a QList of all buses. Each bus is represented by a QDict, which has a key with a QList of all PCI devices attached to it. Each device is represented by a QDict. As has happended to other complex conversions, it's hard to split this commit as part of it are new functions which are called by each other. IMPORTANT: support for printing PCI bridge attached devices is NOT part of this commit, it's going to be added by the next commit, as it's untested. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
A helper to retrieve a QDict from a QDict. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Iterate over QList entries, it's needed to call qlist_entry_obj() to retrieve the stored QObject. I'm not sure if it's ok to have this, because it's not as easy as qlist_iter() and the QListEntry data type is now exposed to the users, which means we have one more struct to be maintained when we have libqmp. Adding anyway, as it's more compact and people are asking for it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Found some places that seems needs this explicitly, now that read-write is not the default. Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
Some more command line options had entries for command line help, but documentation for texi and derived formats (man, html, info) was missing. For conditional options, the texi documentation was added unconditionally. This seems reasonable because typically man pages are shared, and html users expect to see one documentation (not several nearly identical documents for the different systems). Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
* Fix column for help text. * Give some more help, especially for the new '?' parameters. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
When called with property value "?", a help text will be printed (instead of an error message). This is useful for command lines like qemu -device e1000,mac=? and is already standard for other command line options. A better help text could be provided by extending the Property structure with a desc field. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
When called with property "?", a list of supported properties will be printed (instead of an error message). This is useful for command lines like qemu -device e1000,? and was already standard for other options like model=? Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kirill A. Shutemov 提交于
_FORTIFY_SOURCE is a Glibc feature which adds memory and string function protection. Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kirill A. Shutemov 提交于
CC i386-linux-user/mmap.o cc1: warnings being treated as errors /usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'mmap_frag': /usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:253: error: ignoring return value of 'pread', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c: In function 'target_mmap': /usr/src/RPM/BUILD/qemu-0.11.92/linux-user/mmap.c:477: error: ignoring return value of 'pread', declared with attribute warn_unused_result make[1]: *** [mmap.o] Error 1 Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kirill A. Shutemov 提交于
CC i386-softmmu/monitor.o cc1: warnings being treated as errors /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save': /usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result make[1]: *** [monitor.o] Error 1 Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kirill A. Shutemov 提交于
CC i386-softmmu/vl.o cc1: warnings being treated as errors /usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'qemu_event_increment': /usr/src/RPM/BUILD/qemu-0.11.92/vl.c:3404: error: ignoring return value of 'write', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/vl.c: In function 'main': /usr/src/RPM/BUILD/qemu-0.11.92/vl.c:5774: error: ignoring return value of 'write', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6064: error: ignoring return value of 'chdir', declared with attribute warn_unused_result /usr/src/RPM/BUILD/qemu-0.11.92/vl.c:6083: error: ignoring return value of 'chdir', declared with attribute warn_unused_result make[1]: *** [vl.o] Error 1 Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-