- 25 9月, 2018 1 次提交
-
-
由 Hervé Poussineau 提交于
OpenBIOS gained 40p support in 5b20e4ca Use it, instead of relying on an unmaintained and very limited firmware. Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 23 8月, 2018 1 次提交
-
-
由 Thomas Huth 提交于
There is currently a funny problem with the "mc146818rtc" device: 1) Start QEMU like this: qemu-system-ppc64 -M pseries -S 2) At the HMP monitor, enter "info qom-tree". Note that there is an entry for "/rtc (spapr-rtc)". 3) Introspect the mc146818rtc device like this: device_add mc146818rtc,help 4) Run "info qom-tree" again. The "/rtc" entry is gone now! The rtc_finalize() function of the mc146818rtc device has two bugs: First, it tries to remove a "rtc" property, while the rtc_realizefn() added a "rtc-time" property instead. And second, it should have been done in an unrealize function, not in a finalize function, to avoid that this causes problems during introspection. But since adding aliases to the global machine state should not be done from a device's realize function anyway, let's rather fix this issue by moving the creation of the alias to the code that creates the device (and thus is run from the machine init functions instead), i.e. the mc146818_rtc_init() function for most machines. The prep machines are special, since the mc146818rtc device is created here in the realize function of the i82378 device. Since we certainly don't want to add the alias there, we add it to some code that is called from the ibm_40p_init() machine init function instead. Since the alias is now only created during the machine init, we can remove the object_property_del() completely. Fixes: 654a36d8Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1534419358-10932-5-git-send-email-thuth@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 8月, 2018 3 次提交
-
-
由 Mark Cave-Ayland 提交于
Instead initialise the device via qdev to allow us to set device properties directly as required. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Hervé Poussineau 提交于
- prep machine is a fictional machine, so has no specifications. Which devices can be changed/added/removed without impact? Are interrupts correctly mapped? - prep firmware (OHW) has support only for IDE drives (no SCSI). Booting from IDE has been broken approximatively 3 years ago, and nobody complained. - OHW is limited on IDE boot to a specific set of OS loaders. These operating systems are of the 2004 time frame. - OHW can use -kernel. Linux kernel freezes a long time after PS/2 mouse detection, and then screen becomes garbage. This was already broken in QEMU v2.7, 2 years ago, and nobody complained. On the other side: - 40p is a real machine, so emulation can be checked against hardware specifications - OpenBIOS has support for SCSI block devices, including 40p LSI adapter - OpenBIOS can start mostly all Linux kernels (including recent ones) and recent operating system (like NetBSD 7.1.2) Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> [dwg: Drop prep from boot-serial test to avoid deprecation warnings] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Peter Maydell 提交于
The prep machine has some code which is stubs of accessors for XCSR registers. This has been disabled via #if 0 since commit b6b8bd18 in 2004, and doesn't have any actual interesting content. It also uses the deprecated old_mmio accessor functions. Remove it entirely. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 07 7月, 2018 1 次提交
-
-
由 Mark Cave-Ayland 提交于
Commit 29f9cef3 "ppc: Include vga cirrus card into the compiling process" changed the default display adapter for all PPC machines to cirrus. Unfortunately it missed setting the default display type to stdvga for both PReP machines causing the display to fail to initialise under OpenHackWare. Update the MachineClass for both prep and 40p machines so that the default std(vga) display adapter is the default if no options are specified which fixes the display for the PReP machines. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 02 7月, 2018 2 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Code change produced with: $ git ls-files | egrep '\.[ch]$' | \ xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g' Suggested-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Message-Id: <20180625124238.25339-6-f4bug@amsat.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 12 6月, 2018 2 次提交
-
-
由 Mark Cave-Ayland 提交于
Commit 72d3d8f0 "hw/isa/superio: Add a keyboard/mouse controller (8042)" added an 8042 keyboard device to the PC87312 superio device to replace that being used by the prep machine. Unfortunately this commit didn't do the same for the 40p machine which broke the keyboard by registering two 8042 keyboard devices at the same address. Resolve this by similarly removing the 8042 keyboard from the 40p machine as done for the prep machine in commit 72d3d8f0. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Mark Cave-Ayland 提交于
The Linux sandalfoot zImage has an initialisation process which resets the VGA controller by setting all the BAR addresses to zero to access the VGA ioports at their legacy addresses. Unfortunately setting the framebuffer BAR to address 0 makes the framebuffer memory overlap the internal VGA memory causing accesses to fail, and so prevents the kernel from switching successfully to text mode. Since OpenHackWare configures the framebuffer BAR address outside of the legacy VGA internal memory space, remove pci_allow_0_address from the 40p machine class which causes the BAR reprogramming to zero to fail and so the VGA internal memory can be accessed correctly again. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 18 3月, 2018 1 次提交
-
-
由 Thomas Huth 提交于
The global hack for creating SCSI devices has recently been removed, but this apparently broke SCSI devices on some boards that were not ready for this change yet. For the 40p machine you now get: $ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2 Fix it by providing a lsi53c810_create() function that takes care of calling scsi_bus_legacy_handle_cmdline() after creating the corresponding SCSI controller. Fixes: 14545097Signed-off-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 12 3月, 2018 4 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
Since the PC87312 inherits this abstract model, we remove the I8042 instance in the PREP machine. Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Message-Id: <20180308223946.26784-14-f4bug@amsat.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-6-f4bug@amsat.org> Reviewed-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-4-f4bug@amsat.org> Reviewed-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Thomas Huth 提交于
After reviewing a patch from Philippe that removes block-backend.h from hw/lm32/milkymist.c, I noticed that this header is included unnecessarily in a lot of other files, too. Remove those unneeded includes to speed up the compilation process a little bit. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 2月, 2018 1 次提交
-
-
由 Alistair Francis 提交于
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines were then manually tweaked to pass checkpatch and some curly braces were added to match QEMU style. Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com> Cc: qemu-ppc@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-10-armbru@redhat.com>
-
- 18 12月, 2017 1 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
- add "hw/net/ne2000-isa.h" - remove the old i386 dependency Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> [PPC] Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 17 10月, 2017 1 次提交
-
-
由 Igor Mammedov 提交于
Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 19 9月, 2017 1 次提交
-
-
由 Igor Mammedov 提交于
Almost every user of cpu_generic_init() checks for returned NULL and then reports failure in a custom way and aborts process. Some users assume that call can't fail and don't check for failure, though they should have checked for it. In either cases cpu_generic_init() failure is fatal, so instead of checking for failure and reporting it various ways, make cpu_generic_init() report errors in consistent way and terminate QEMU on failure. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 01 9月, 2017 1 次提交
-
-
由 Igor Mammedov 提交于
it's just a wrapper, drop it and use cpu_generic_init() directly Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <1503592308-93913-26-git-send-email-imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 30 6月, 2017 1 次提交
-
-
由 Thomas Huth 提交于
When using the 40p machine, soundhw_init() is currently called twice, one time from vl.c and one time from ibm_40p_init(). The call in ibm_40p_init() was likely just a copy-and-paste from a old version of the prep machine - but there the call to audio_init() (which was the previous name of this function) has been removed many years ago already, with commit b3e6d591 ("audio: enable PCI audio cards for all PCI-enabled targets"), so we certainly also do not need the soundhw_init() in the 40p function anymore nowadays. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NSahid Ferdjaoui <sferdjao@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 19 5月, 2017 3 次提交
-
-
由 Eduardo Habkost 提交于
All the functions in hw/audio/audio.h are called "soundhw_*()" and live in hw/audio/audiohw.c. Rename the header file for consistency. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> Message-id: 20170508205735.23444-4-ehabkost@redhat.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Eduardo Habkost 提交于
To make it consistent with the remaining soundhw.c functions and avoid confusion with the audio_init() function in audio/audio.c, rename audio_init() to soundhw_init(). Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Message-id: 20170508205735.23444-3-ehabkost@redhat.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Eduardo Habkost 提交于
There's no reason to keep the soundhw table in arch_init.c. Move that code to a new hw/audio/soundhw.c file. While moving the code, trivial coding style issues were fixed. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170508205735.23444-2-ehabkost@redhat.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 21 2月, 2017 1 次提交
-
-
由 Markus Armbruster 提交于
Block backends defined with -drive if=ide are meant to be picked up by machine initialization code: a suitable frontend gets created and wired up automatically. if=ide drives not picked up that way can still be used with -device as if they had if=none, but that's unclean and best avoided. Unused ones produce an "Orphaned drive without device" warning. -drive parameter "if" is optional, and the default depends on the machine type. If a machine type doesn't specify a default, the default is "ide". Many machine types default to if=ide, even though they don't actually have an IDE controller. A future patch will change these defaults to something more sensible. To prepare for it, this patch makes default "ide" explicit for the machines that actually pick up if=ide drives: * alpha: clipper * arm/aarch64: spitz borzoi terrier tosa * i386/x86_64: generic-pc-machine (with concrete subtypes pc-q35-* pc-i440fx-* pc-* isapc xenfv) * mips64el: fulong2e * mips/mipsel/mips64el: malta mips * ppc/ppc64: mac99 g3beige prep * sh4/sh4eb: r2d * sparc64: sun4u sun4v Note that ppc64 machine powernv already sets an "ide" default explicitly. Its IDE controller isn't implemented, yet. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Message-Id: <1487153147-11530-2-git-send-email-armbru@redhat.com>
-
- 31 1月, 2017 2 次提交
-
-
由 Hervé Poussineau 提交于
Machine supports both Open Hack'Ware and OpenBIOS. Open Hack'Ware is the default because OpenBIOS is currently unable to boot PReP boot partitions or PReP kernels. Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> [dwg: Correct compile failure with KVM located by Thomas Huth] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Hervé Poussineau 提交于
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 13 6月, 2016 1 次提交
-
-
由 Eduardo Habkost 提交于
This wrapper for machine_usb(current_machine) is not necessary, replace all usages of usb_enabled() with machine_usb(). Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 19 5月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 3月, 2016 1 次提交
-
-
由 Veronia Bahaa 提交于
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: NVeronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 29 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
-
- 13 1月, 2016 1 次提交
-
-
由 Markus Armbruster 提交于
Printing CPU registers is not helpful during machine initialization. Moreover, these are straightforward configuration or "can get resources" errors, so dumping core isn't appropriate either. Replace hw_error() by error_report(); exit(1). Matches how we report these errors in other machine initializations. Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NMarkus Armbruster <armbru@pond.sub.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NThomas Huth <thuth@redhat.com> Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
- 23 10月, 2015 1 次提交
-
-
由 Paolo Bonzini 提交于
These messages are disabled by default; a perfect usecase for tracepoints. Convert them over. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 25 9月, 2015 1 次提交
-
-
由 Peter Crosthwaite 提交于
Rename ELF_MACHINE to be PPC specific. This is used as-is by the various PPC bootloaders and is locally defined to ELF_MACHINE in linux user in PPC specific ifdeffery. This removes another architecture specific definition from the global namespace (as desired by multi-arch). Cc: Alexander Graf <agraf@suse.de> Cc: qemu-ppc@nongnu.org Reviewed-by: NRichard Henderson <rth@twiddle.net> Acked-By: NRiku Voipio <riku.voipio@linaro.org> Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 19 9月, 2015 1 次提交
-
-
由 Eduardo Habkost 提交于
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine automatically using a script. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> [AF: Style cleanups, convert imx25_pdk machine] Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 09 9月, 2015 1 次提交
-
-
由 Paolo Bonzini 提交于
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: NRichard henderson <rth@twiddle.net> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 7月, 2015 1 次提交
-
-
由 Bharata B Rao 提交于
Keep cpu_model field in MachineState uptodate so that it can be used from the CPU hotplug path. Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 03 6月, 2015 1 次提交
-
-
由 Shannon Zhao 提交于
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 10 3月, 2015 2 次提交
-
-
由 Mark Cave-Ayland 提交于
Currently the m48t59 device uses the hardware model in order to determine whether the year value is offset from the hardware value. As this will soon be required by the x59 model, create a qdev base-year property to represent the base year and update the callers appropriately. Reviewed-by: NHervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-
由 Hervé Poussineau 提交于
Remove left-overs from header file. Move some functions only used by PReP to hw/ppc/prep.c Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> CC: Andreas Färber <afaerber@suse.de> Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-