Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When removing unseen queue-heads from the async queue list, we should not
set the seen flag to 0, as this may cause them to be removed by
ehci_queues_rip_unused() during the next call to ehci_advance_async_state()
if the timer is late or running at a low frequency.

Note:
1) This *may* have caused the instant unlink / relinks described in commit
   9bc3a3a2

2) Rather then putting more if-s inside ehci_queues_rip_unused, this patch
   instead introduces a new ehci_queues_rip_unseen function.

3) This patch also makes it save to call ehci_queues_rip_unseen() multiple
   times, which gets used in the folluw up patch titled:
   "ehci: Walk async schedule before and after migration"
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The Linux ehci isoc scheduling code fills the entire schedule ahead of
time minus 80 frames. If we make a large jump in where we are in the
schedule, ie 40 frames, then the scheduler all of a sudden will only have
40 frames left to work in, causing it to fail packet submissions
with error -27 (-EFBIG).

Changes in v2:
-Don't hardcode a maximum number of frames to process in one tick, instead:
 -Process a minimum number of frames to ensure we do eventually catch up
 -Stop (after the minimum number) when the guest has requested an irq
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If Interrupt Threshold Control is 8 or a multiple of 8, then
s->usbsts_frindex can become exactly 0x4000, at which point
(s->usbsts_frindex > s->frindex) will never become true, as
s->usbsts_frindex will not be lowered / reset in this case.

This patch fixes this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Also register different memory regions for capabilities,
operational registers and port status registers.  Create
separate tracepoints for operational regs and port status
regs.  Ditch a bunch of sanity checks because the memory
core will do this for us now.

Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

xhci needs this for USB_REQ_SET_ADDRESS due to the way
usb addressing is handled by the xhci hardware.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Some guests need this according to
Alejandro Martinez Ruiz <alex@securiforest.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

... and register subregions instead, so we offload the dispatching
to the the memory subsystem which is designed to handle it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Everything is in place, flip the big switch now
and enable support for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Pick the correct interrupter when queuing an event.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Prepare xhci runtime register access function for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move all state belonging to the (single) interrupter into a separate
struct.  First step in adding support for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Now that we have a separate function to raise an IRQ we can move
some comon code into the function.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Split xhci_irq_update into a function which handles intx updates
(including lowering the irq line once the guests acks the interrupt)
and one which is used for raising an irq only.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Drop custom write_config function which isn't needed any more.
Make the msi property a bit property so it accepts 'on' & 'off'.
Enable MSI by default.

TODO: add compat property to disable on old machine types.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add usb3 descriptors to usb-storage, so it shows up as superspeed
device when connected to xhci.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for creating BOS descriptor and
device cappability descriptors.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for building superspeed endpoint companion descriptors,
create them for superspeed usb devices.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add superspeed descriptor entry to USBDesc,
advertise superspeed support when present.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch changes the way xhci ports are linked to USBPorts.  The fixed
1:1 relationship between xhci ports and USBPorts is gone.  Now each
USBPort represents a physical plug which has usually two xhci ports
assigned: one usb2 and ond usb3 port.  usb devices show up at one or the
other, depending on whenever they support superspeed or not.

This patch also makes the number of usb2 and usb3 ports runtime
configurable by adding 'p2' and 'p3' properties.  It is allowed to
have different numbers of usb2 and usb3 ports.  Specifying p2=4,p3=2
will give you an xhci adapter which supports all speeds on physical
ports 1+2 and usb2 only on ports 3+4.

Change the register layout to be a bit more sparse and also not depend
on the number of ports.  Useful when for making the number of ports
runtime-configurable.

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for iso transfers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Implement mfindex register and mfindex wrap event.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch splits the xhci_xfer_data function into three.
The xhci_xfer_data function used to do does two things:

  (1) copy transfer data between guest memory and a temporary buffer.
  (2) report transfer results to the guest using events.

Now we three functions to handle this:

  (1) xhci_xfer_map creates a scatter list for the transfer and
      uses that (instead of the temporary buffer) to build a
      USBPacket.
  (2) xhci_xfer_unmap undoes the mapping.
  (3) xhci_xfer_report sends out events.

The patch also fixes reporting of transaction errors which must be
reported unconditinally, not only in case the guest asks for it
using the ISP flag.

[ v2: fix warning ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

original xhci code (the one which used libusb directly) used to use
'background transfers' for iso streams.  In upstream qemu the iso
stream buffering is handled by usb-host & usb-redir, so we will
never ever need this.  It has been left in as reference, but is dead
code anyway.  Rip it out.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

usb-audio is a full speed (1.1) device,
but bcdUSB claims it is usb 2.0.  Fix it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Windows users need to know that they have to use the Baum driver to make
the qemu braille device work.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In order for redirection to work properly when redirecting to an emulated
XHCI controller, the usb-redir-host must support both
usb_redir_cap_ep_info_max_packet_size and usb_redir_cap_64bits_ids,
reject any devices redirected to an XHCI controller when these are not
supported.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This is needed for usb-redir to work properly with the xhci emulation.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This gives us support for 64 bit ids which is needed for using XHCI with
the new hcd generated ids.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Babble is the appropriate error in this case (rather then signalling a stall).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>