- 14 2月, 2011 5 次提交
-
-
由 Jan Kiszka 提交于
If there is any pending request that requires us to leave the inner loop if main_loop, makes sure we do this as soon as possible by enforcing non-blocking IO processing. At this change, move variable definitions out of the inner loop to improve readability. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Except for timer events, we currently do not leave the loop over all VCPUs if an IO event was filed. That may cause unexpected IO latencies under !CONFIG_IOTHREAD in SMP scenarios. Fix it by setting the global exit_request which breaks the loop. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
A pending vmstop request is also a reason to leave the inner main loop. So far we ignored it, and pending stop requests issued over VCPU threads were simply ignored. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
If some I/O operation ends up calling qemu_system_reset_request in VCPU context, we record this and inform the io-thread, but we do not terminate the VCPU loop. This can lead to fairly unexpected behavior if the triggering reset operation is supposed to work synchronously. Fix this for TCG (when run in deterministic I/O mode) by setting the VCPU on stop and issuing a cpu_exit. KVM requires some more work on its VCPU loop. [ ported from qemu-kvm ] Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
If we call qemu_cpu_kick more than once before the target was able to process the signal, pthread_kill will fail, and qemu will abort. Prevent this by avoiding the redundant signal. This logic can be found in qemu-kvm as well. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 13 2月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Initialize the field queue_size, dropped by 91c9e091. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 2月, 2011 17 次提交
-
-
由 Blue Swirl 提交于
Ignore failure with hpet device creation. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be created. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Convert to qdev, also add a proper reset function. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Allow failure with vmware_vga device creation and use standard VGA instead. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Turn vmsvga_init into an inline function. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Andrzej Zaborowski 提交于
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
1) Move GPIO-related functionality to qdev. Now one can use directly qdev_get_gpio_in()/qdev_connect_gpio_out() on max7310 devices. 2) Make reset to be called through qdev.reset callback. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Seceral files contained onnecessary dependencies on hw/pxa.h header. Drop unused references. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 11 2月, 2011 14 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Dmitry Eremin-Solenikov 提交于
These two fields were added as a part of ARMv7 support patch (back in 2007), were never used by any code, so can be dropped. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
由 Peter Maydell 提交于
Remove a stray #include <stdio.h> from the middle of neon_helper.c: it was harmless but pointless since we include stdio.h at the top of the file anyway. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Add uses of the float32/float64 boxing and unboxing macros so that the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES enabled. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by adding and using new macros const_float16(), const_float32() and const_float64() so you can use array initializers in an array of float16/float32/float64 whether the types are bare or wrapped in the structs. [aurelien@aurel32.net: do the same for float16] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
The Neon half-precision conversion operations (VCVT.F16.F32 and VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike the VFP versions (VCVTB and VCVTT). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Silence the NaNs that may result from half-precision conversion, as we do for the other conversions. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Correctly handle NaNs in float16_to_float32(), by defining and using a float16ToCommonNaN() function, as we do with the other formats. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Fix various bugs in the single-to-half-precision conversion code: * input NaNs not correctly converted in IEEE mode (fixed by defining and using a commonNaNToFloat16()) * wrong values returned when converting NaN/Inf into non-IEEE half precision value * wrong values returned for conversion of values which are on the boundary between denormal and zero for the half precision format * zeroes not correctly identified * excessively large results in non-IEEE mode should generate InvalidOp, not Overflow Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Honour the default_nan_mode flag when doing conversions between different floating point formats, as well as when returning a NaN from a two-operand floating point function. This corrects the behaviour of float<->double conversions on both ARM and SH4. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Add a float16 type to softfloat, rather than using bits16 directly. Also add the missing functions float16_is_quiet_nan(), float16_is_signaling_nan() and float16_maybe_silence_nan(), which are needed for the float16 conversion routines. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Tristan Gingold 提交于
This function is only used within exec.c, so no need to make it public. Signed-off-by: NTristan Gingold <gingold@adacore.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 10 2月, 2011 3 次提交
-
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>
-
git://gitorious.org/qemu-maemo/qemu由 Aurelien Jarno 提交于
* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu: linux-user: fix for loopmount ioctl linux-user: fix build errors for mmap2-only ports user: speed up init_paths a bit linux-user: implement sched_{g,s}etaffinity linux-user/FLAT: allow targets to override FLAT processing linux-user/FLAT: fix auto-stack sizing linux-user: decode MAP_{UNINITIALIZED,EXECUTABLE} in strace linux-user: add ppoll syscall support linux-user/elfload: add FDPIC support linux-user: fix sizeof handling for getsockopt linux-user: Fix possible realloc memory leak linux-user: Add support for -version option
-
由 Christophe Lyon 提交于
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-