- 02 4月, 2011 1 次提交
-
-
由 Peter Maydell 提交于
Fix several bugs in VLD of single element to all lanes: The "single element to all lanes" form of VLD1 differs from those for VLD2, VLD3 and VLD4 in that bit 5 indicates whether the loaded element should be written to one or two Dregs (rather than being a register stride). Handle this by special-casing VLD1 rather than trying to have one loop which deals with both VLD1 and 2/3/4. Handle VLD4.32 with 16 byte alignment specified, rather than UNDEFfing. UNDEF for the invalid size and alignment combinations. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 22 3月, 2011 3 次提交
-
-
由 Peter Maydell 提交于
Fix a TCG temporary leak when translating 32-bit scalar VMULL. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
SMUAD and SMLAD are supposed to set the Q bit if the addition of the two 16x16 multiply products and optional accumulator overflows considered as a signed value. However we were only doing this check for the addition of the accumulator, not when adding the products, with the effect that we were mishandling the edge case where both inputs are 0x80008000. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Decode of Thumb load/store was merging together the cases of 'bit 11==0' (reg+reg LSL imm) and 'bit 11==1' (reg+imm). This happens to work for valid instruction patterns but meant that we would not UNDEF for the cases the architecture mandates that we must. Make the decode actually look at bit 11 as well as [10..8] so that we UNDEF in the right places. This change also removes what was a spurious unreachable 'case 8', and correctly frees TCG temporaries on the illegal-insn codepaths. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 07 3月, 2011 6 次提交
-
-
由 Peter Maydell 提交于
Newer ARM kernels try to probe for whether the CPU has hardware breakpoint support. For this to work QEMU has to implement a minimal set of the cp14 debug registers. The architecture requires v7 cores to implement debug and so there is no defined way to report its absence; however in practice returning a zero DBGDIDR (ie with a reserved value for "debug architecture version") should cause well-written hw debug users to do the right thing. We also implement DBGDRAR and DBGDSAR as RAZ, indicating no memory mapped debug components. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Use the new TCG temporary leak debugging facilities to check that each ARM instruction does not leak temporaries. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
This commit removes the ad-hoc resource leak checking code from target-arm. This includes replacing all uses of new_tmp() with tcg_temp_new_i32() and all uses of dead_tmp() with tcg_temp_free_i32(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
The code for Thumb2 ORNS (or negated and set flags) was trashing a TCG input register which was needed later for use in calculating flags, with the effect that the carry flag was always set with the wrong sense. Fix this by using the TCG orc op instead of separate not and or ops. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Fix two bugs in the translation of the instructions VMOV sa,sb,rx,ry and VMOV rx,ry,sa,sb (which copy between a pair of ARM core registers and a pair of VFP single precision registers): * An incorrect condition meant these instruction patterns were being treated as load/store multiple, which resulted in the generation of bad code and a runtime segfault * The order of the core register pair was reversed so the values would go to the wrong registers Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
In v7 of the ARM architecture, WFI (wait for interrupt) is a first-class instruction, but in previous versions this functionality was provided via a cp15 coprocessor register. Add correct feature checks to the decoding of the cp15 WFI instructions so that they behave correctly for newer cores. In particular, the old 0,c7,c8,2 encoding used on ARM940 has been reused for VA-to-PA translation in v6 and v7. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 21 2月, 2011 10 次提交
-
-
由 Peter Maydell 提交于
For Neon shifts by immediate and narrow, correctly handle the case where the source registers and the destination registers overlap (the second pass should use the original register contents, not the results of the first pass). This includes a refactoring to pull the size check outside the loop rather than inside, since there is now very little common code between the size == 3 and size != 3 case. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Pull the code which decodes narrowing operations as being either signed/unsigned saturate or plain out into its own function. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Fix decoding of 64 bits variants of VSHRN, VRSHRN, VQSHRN, VQSHRUN, VQRSHRN, VQRSHRUN, taking into account whether inputs are unsigned or not. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Call the normal shift helpers instead of the rounding ones. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Move the implementation of the Neon VUZP unzip instruction from inline code to helper functions. (At 50+ TCG ops it was well over the recommended limit for coding inline.) The helper implementations also give the correct answers where the inline implementation did not. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Move the implementation of the Neon VUZP unzip instruction from inline code to helper functions. (At 50+ TCG ops it was well over the recommended limit for coding inline.) The helper implementations also fix the handling of the quadword version of the instruction. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juha Riihimäki 提交于
We handle Thumb Neon data processing instructions by converting them into the equivalent ARM encoding, as the two are very close. However the ARM encoding should have bit 28 set, not clear. This wasn't causing any problems because we don't actually look at that bit during decode; however it is better to do the conversion correctly to avoid problems later if we add checks to UNDEF on SBZ/SBO bits. Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
For VQDMLSL, negation has to occur after saturation, not before. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Refactor the handling of VQDMULL so that it is dealt with in its own if() case rather than together with the accumulating instructions. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Implement VMULL.P8 (the 32x32->64 version of the polynomial multiply instruction). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 2月, 2011 1 次提交
-
-
由 Peter Maydell 提交于
The Neon half-precision conversion operations (VCVT.F16.F32 and VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike the VFP versions (VCVTB and VCVTT). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 10 2月, 2011 3 次提交
-
-
由 Christophe Lyon 提交于
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Fix bit mask used when widening the result of shift on narrow input. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juha Riihimäki 提交于
VQMOVUN does a signed-to-unsigned saturating conversion. This is different from both the signed-to-signed and unsigned-to-unsigned conversions already implemented, so we need a new set of helper functions (neon_unarrow_sat*). Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 05 2月, 2011 4 次提交
-
-
由 Peter Maydell 提交于
Refine the decoding of the Thumb preload and hint space, so we UNDEF on the patterns that are supposed to UNDEF rather than NOP. We also move the tests for this space earlier, so we don't emit harmless but unnecessary address generation code for preload hints (which by their nature are likely to be in hot code paths). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Correct the decoding of the ARM preload and memory hint space, by adding decoding of PLI, PLDW and the v7MP unallocated hint space. This commit also corrects a slightly overexuberant decoding of PLD(register) which was not checking that bit 4 was one. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
This patch fixes the errors reported by my tests in VSRA. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 26 1月, 2011 3 次提交
-
-
由 Peter Maydell 提交于
Fix the register and part of register we get the scalar from in the various "multiply vector by scalar" ops (VMUL by scalar and friends). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
Fix garbage collection of temporaries in Neon emulation. Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Christophe Lyon 提交于
This patch fixes corner-case saturations, when the target range is zero. It merely removes the guard against (sh == 0), and makes: __ssat(0x87654321, 1) return 0xffffffff and set the saturation flag __usat(0x87654321, 0) return 0 and set the saturation flag Signed-off-by: NChristophe Lyon <christophe.lyon@st.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 18 1月, 2011 1 次提交
-
-
由 Peter Maydell 提交于
Add support for logging the start of instructions in TCG code debug dumps for ARM targets. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
- 15 1月, 2011 8 次提交
-
-
由 Peter Maydell 提交于
We were not correctly restoring the IT bits when resuming execution after taking an unexpected exception in the middle of an IT block. Fix this by tracking them along with PC changes and restoring in gen_pc_load(). This fixes bug https://bugs.launchpad.net/qemu/+bug/581335Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Create a new function which does the common sequence of gen_set_condexec, gen_set_pc_im, gen_exception, set is_jmp to DISAS_JUMP. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Remove a redundant call to gen_set_condexec() in the translation of Thumb mode SWI. (SWI and WFI generate "exceptions" which happen after the execution of the instruction, ie when PC and IT bits have updated. So the condexec bits at this point are not correct. However, the code that handles finishing the translation of the TB will write the correct value of the condexec bits later, so the only effect was that a conditional Thumb SWI would generate slightly worse code than necessary.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
When translating, get the user/priv state from the TB flags, not the CPUState. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
When translating, the condexec bits for the TB are in the TB flags; the CPUState condexec bits may be different. This patch fixes https://bugs.launchpad.net/bugs/604872 where we might segfault if we took an exception in the middle of a TB with an IT block, because when we came to retranslate in cpu_restore_state() the CPUState condexec bits would have advanced compared to the start of the TB and we would generate different (wrong) code. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
The Thumb/ARM state for the TB being translated should come from the TB flags, not the CPUState. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
When translating, the VFP vector length and stride for this TB are encoded in the TB flags; the CPUState copies may be different and must not be used. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
When translating code, whether the VFP unit is enabled for this TB is stored in a bit in the TB flags. Use this rather than incorrectly reading the FPEXC from the CPUState passed to translation. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-