Add a bool variable is_write as a parameter to the translate function of
MemoryRegionIOMMUOps to indicate the operation of the access. It can be
used for correct fault reporting from within the callback.
Change the interface of related functions.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Rename helper functions to make a clearer distinction between
the PCIe capability/control register feature ARI forwarding and a
device that supports the ARI feature via an ARI extended PCIe capability.
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

PCI_ARI_CAP_NFN, a macro for reading next function was used instead of
the intended write.
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Needed for systems without IASL.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add an SSDT ACPI table for the TPM device.
Add a TCPA table for BIOS logging area when a TPM is being used.

The latter follows this spec here:

http://www.trustedcomputinggroup.org/files/static_page_files/DCD4188E-1A4B-B294-D050A155FB6F7385/TCG_ACPIGeneralSpecification_PublicReview.pdf

This patch has Michael Tsirkin's patches folded in.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

commit 868270f2
    acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.

As a result, issues on boot and halt are observed.

Fix this up by doubling reserved memory for new machine types.

Cc: qemu-stable@nongnu.org
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Prevent out-of-bounds array access on
acpi_pcihp_pci_status.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

The regions are destroyed and recreated on configuration space accesses.
We need to destroy them before the containing PCIBridgeWindows object
is freed.
Reported-by: NGonglei <arei.gonglei@huawei.com>
Reported-by: NKnut Omang <knut.omang@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.

The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

target-arm:
 * fix preferred return address for A64 BRK insn
 * implement AArch64 single-stepping
 * support loading gzip compressed AArch64 kernels
 * use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
 * minor cleanups

# gpg: Signature made Tue 19 Aug 2014 19:04:09 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140819:
  arm: stellaris: Remove misleading address_space_mem var
  arm: armv7m: Rename address_space_mem -> system_memory
  aarch64: Allow -kernel option to take a gzip-compressed kernel.
  loader: Add load_image_gzipped function.
  arm: cortex-a9: Fix cache-line size and associativity
  arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
  target-arm: Rename QEMU PSCI v0.1 definitions
  target-arm: Implement MDSCR_EL1 as having state
  target-arm: Implement ARMv8 single-stepping for AArch32 code
  target-arm: Implement ARMv8 single-step handling for A64 code
  target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tb
  target-arm: Set PSTATE.SS correctly on exception return from AArch64
  target-arm: Correctly handle PSTATE.SS when taking exception to AArch32
  target-arm: Don't allow AArch32 to access RES0 CPSR bits
  target-arm: Adjust debug ID registers per-CPU
  target-arm: Provide both 32 and 64 bit versions of debug registers
  target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14
  target-arm: Collect up the debug cp register definitions
  target-arm: Fix return address for A64 BRK instructions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This reverts commit b0225c2c
(which breaks building with Xen enabled and also leaks memory).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This argument is a MemoryRegion and not an AddressSpace.

"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On aarch64 it is the bootloader's job to uncompress the kernel.  UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.

However the qemu -kernel option does not do this.  The following
command does not work:

  qemu-system-aarch64 [...] -kernel /boot/vmlinuz

because it tries to execute the gzip-compressed data.

This commit lets gzip-compressed kernels be uncompressed
transparently.

Currently this is only done when emulating aarch64.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As the name suggests this lets you load a ROM/disk image that is
gzipped.  It is uncompressed before storing it in guest memory.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For A9, The cache associativity is 4 and the lines size is 32B.
Self identify in CCSIDR accordingly. Cache size remains at 16k.

QEMU doesn't emulate caches, but we should still report the correct
cache-line size to the guest. Some guests (like u-boot) complain if
the cache-line size mismatches a requested flush or invalidate
operation.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.

This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT.  Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.

Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts.  After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.

Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only).  Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels.  Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>.  To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.

However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that all the new code to support single-stepping is in
place, wire up the guest-visible MDSCR_EL1, so the guest
can enable single-stepping.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Implement ARMv8 software single-step handling for A64 code:
correctly update the single-step state machine and generate
debug exceptions when stepping A64 code.

This patch has no behavioural change since MDSCR_EL1.SS can't
be set by the guest yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

If gen_goto_tb() decides not to link the two TBs, then the
fallback path generates unnecessary code:
 * if singlestep is enabled then we generate unreachable code
   after the gen_exception_internal(EXCP_DEBUG)
 * if singlestep is disabled then we will generate exit_tb(0)
   twice, once in gen_goto_tb() and once coming out of the
   main loop with is_jmp set to DISAS_JUMP

Correct these deficiencies by only emitting exit_tb() in the
non-singlestep case, in which case we can use DISAS_TB_JUMP
to suppress the main-loop exit_tb().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Set the PSTATE.SS bit correctly on exception returns from AArch64,
as required by the debug single-step functionality.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

When an exception is taken to AArch32, we must clear the PSTATE.SS
bit for the exception handler, and must also ensure that the SS bit
is not set in the value saved to SPSR_<mode>. Achieve both of these
aims by clearing the bit in uncached_cpsr before saving it to the SPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.

Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Allow each CPU type to specify the value for the debug ID
registers, by putting them in the ARMCPU struct, and use
the resulting information to only expose the correct number
of watchpoint and breakpoint registers for the CPU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Bring the 32 bit and 64 bit views of the debug registers into
line by providing the same set of registers in both cases.
(This still isn't a complete set, but it is consistent.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Currently the STATE_BOTH shorthand for allowing a single reginfo struct
to define handling for both AArch32 and AArch64 views of a register
only permits this where the AArch32 view is in cp15. It turns out that
the debug registers in cp14 also have neatly lined up encodings;
allow these also to share reginfo structs by permitting a STATE_BOTH
reginfo to specify the .cp field (and continue to default to 15 if
it is not specified).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

At the moment we have a mixed set of mostly dummy register
definitions for various debug related registers which have
been added piecemeal in order to get Linux kernels to boot.
In preparation for actually implementing debug support,
bring them all together into one place.

This commit doesn't change behaviour: we still expose
exactly the same registers and behaviour to the guest
in all configurations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

When we take an exception resulting from a BRK instruction,
the architecture requires that the "preferred return address"
reported to the exception handler is the address of the BRK
itself, not the following instruction (like undefined
insns, and in contrast with SVC, HVC and SMC). Follow this,
rather than incorrectly reporting the address of the following
insn.

(We do get this correct for the A32/T32 BKPT insns.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org

SCSI changes that enable sending vendor-specific commands via virtio-scsi.

Memory changes for QOMification and automatic tracking of MR lifetime.

# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  mtree: remove write-only field
  memory: Use canonical path component as the name
  memory: Use memory_region_name for name access
  memory: constify memory_region_name
  exec: Abstract away ref to memory region names
  loader: Abstract away ref to memory region names
  tpm_tis: remove instance_finalize callback
  memory: remove memory_region_destroy
  memory: convert memory_region_destroy to object_unparent
  ioport: split deletion and destruction
  nic: do not destroy memory regions in cleanup functions
  vga: do not dynamically allocate chain4_alias
  sysbus: remove unused function sysbus_del_io
  qom: object: move unparenting to the child property's release callback
  qom: object: delete properties before calling instance_finalize
  virtio-scsi: implement parse_cdb
  scsi-block, scsi-generic: implement parse_cdb
  scsi-block: extract scsi_block_is_passthrough
  scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
  scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/qmp-unstable/queue/qmp:
  monitor: fix use after free
  dump.c: Fix memory leak issue in cleanup processing for dump_init()
  monitor: Remove hardcoded watchdog event names
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.
Reported-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

In dump_init(), when failure occurs, need notice about 'fd' and memory
mapping. So call dump_cleanup() for it (need let all initializations at
front).

Also simplify dump_cleanup(): remove redundant 'ret' and redundant 'fd'
checking.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NHani Benhabiles <hani@linux.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

* remotes/amit/for-2.2:
  virtio-serial: search for duplicate port names before adding new ports
  virtio-serial: create a linked list of all active devices
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Before adding new ports to VirtIOSerial devices, check if there's a
conflict in the 'name' parameter.  This ensures two virtserialports with
identical names are not initialized.

Reported-by: <mazhang@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>