Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The property is used from board level to set APIC ID for CPUs it
creates. Do so in a new pc_new_cpu() helper, to be reused for hot-plug.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This helper replaces '_' with '-' in a uniform way.
As a side effect, even custom mappings must use '-' now.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
[AF: Split off; operate on NUL-terminated string rather than '=' delimiter]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

* introduce processor status bitmask visible to guest at 0xaf00 addr,
  where ACPI asl code expects it
* set bit corresponding to APIC ID in processor status bitmask on
  receiving CPU hot-plug notification
* trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Replaces an open-coded loop and hides unused CPUArchState.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Wrapper to avoid open-coded loops and to make CPUState iteration
independent of CPUArchState.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

get_arch_id() adds possibility for generic code to get a guest-visible
CPU ID without accessing CPUArchState.
If derived classes don't override it, it will return cpu_index.

Override it on target-i386 in X86CPU to return the APIC ID.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Nliguang <lig.fnst@cn.fujitsu.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It provides updated currently available CPUs count to BIOS on reboot.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Hot-add CPU event will be distributed to acpi_piix4 and rtc_cmos.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Also add a stub for it, to make possible to use it in qom/cpu.c,
which is shared with user emulators.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

If hotplugged, synchronize CPU state to KVM.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It will provide stubs for *-user targets once softmmu-specific calls
are attempted from common CPU code.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Commit 14f9b664 (hw/virtio-net.c: set config size using host features) tries to
calculate config size based on the host features. But it forgets the
VIRTIO_NET_F_MAC were always set for qemu later. This will lead a zero config
len for virtio-net device when both VIRTIO_NET_F_STATUS and VIRTIO_NET_F_MQ were
disabled form command line. Then qemu will crash when user tries to read the
config of virtio-net.

Fix this by counting VIRTIO_NET_F_MAC and make sure the config at least contains
the mac address.

Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1366874814-2658-1-git-send-email-jasowang@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

No user in sight.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Message-id: 20130430094149.GA29094@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

libqtest.c can segfault when calling fclose() if the pidfile wasn't
opened successfully. This patch fixes the issue.
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1367250772-17928-1-git-send-email-jlarrew@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

On s390 the disabled wait state indicates a state of attention.
For example Linux uses that state after a panic. Lets
put the system into panicked state.

An alternative implementation would be to state
disabled-wait <address> instead of pause in the action field.
(e.g. z/OS, z/VM and other classic OSes use the address of the
disabled wait to indicate an error code).
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-id: 6cf41156322e27e81a727b69f03728dbc225d5bb.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: f840042f0e1205041f8feaf0d39ca639884f3a00.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: a5db4ce406647e8f4663b639eae62d880531df8b.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This lets seabios patch the corresponding SSDT entry.

Also add fw_cfg object to /machine/fw_cfg so we can reference
it elsewhere.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 60c65d95fe2b23b12bea67099126566010a11a1a.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If fw_cfg.h is included alone, gcc gives error messages like these:

  error: unknown type name ‘uint32_t’
  error: unknown type name ‘size_t’
  error: unknown type name ‘hwaddr’
  ...
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: d63f8bcdbfbec8135b1b57f9247c513a3e25762c.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pvpanic device is used to send guest panic event from guest to qemu.

When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This event will be emited when qemu detects guest panic.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: cf0bc45ecf9ecd3699bc72dc39f8cbab8ed79d8c.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The guest will be in this state when it is panicked.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 0255f263ffdc2a3716f73e89098b96fd79a235b3.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Better than just releasing the error object silently.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 517E68FC.6030400@siemens.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The following error occurs when building dtc module:

        CHK version_gen.h
         CC libfdt/fdt.o
cc1: error: dtc: No such file or directory [-Werror]
cc1: all warnings being treated as errors
make[1]: *** [libfdt/fdt.o] Error 1
make: *** [subdir-dtc] Error 2

In rules.mak, "-I$(<D) -I$(@D)" was expanded to "-Idtc -I." when
building submodule dct. Due to the using of "-Wmissing-include-dirs,
a warning would be rarsed. To avoid it, add "-I$(<D) -I$(@D)" to
QEMU_INCLUDES instead of QEMU_CFLAGS so that QEMU_CFLAGS does not
contain the "-Idtc".

Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDunrong Huang <riegamaths@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1367247132-19622-1-git-send-email-riegamaths@gmail.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When we try to cast an object to an unknown type, fail the cast. Today
we would simply run into an assert().

This fixes a bug on qemu-system-s390x for me that gets triggered by the
audio code looking for PCI and ISA buses.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1367326936-28539-1-git-send-email-agraf@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduced when applying commit f81222bc (audio: look for the ISA and
PCI buses, 2013-04-18).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1367330432-14417-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-8-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

An empty path will return the sole object of that type in the
QOM tree.  This is different from "/", which returns the root.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-7-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-5-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Several targets can have wavcapture/-soundhw support via PCI cards.
HAS_AUDIO is a useless limitation, remove it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-4-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-3-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-2-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1366867752-11578-5-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1366867752-11578-4-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1366867752-11578-3-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>