Default to false.

Tidy variable naming and inline cast uses while at it.

Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

If enabled, set the thread name at creation (on GNU systems with
  pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Stop/cont commands are broken with -icount due to a deadlock.  The
real problem is that the computation of timers_state.cpu_ticks_offset
makes no sense with -icount enabled: we set it to an icount clock value
in cpu_disable_ticks, and subtract a TSC (or similar, whatever
cpu_get_real_ticks happens to return) value in cpu_enable_ticks.

The fix is simple.  timers_state.cpu_ticks_offset is only used
together with cpu_get_real_ticks, so we can use cpu_get_real_ticks
in cpu_disable_ticks.  There is no need to update cpu_ticks_prev
at the time cpu_disable_ticks is called; instead, we can do it
the next time cpu_get_ticks is called.

The change to cpu_disable_ticks is the important part of the patch.
The rest modifies the code to always check timers_state.cpu_ticks_prev,
even when the ticks are not advancing (i.e. the VM is stopped).  It also
makes a similar change to cpu_get_clock_locked, so that the code remains
similar for cpu_get_ticks and cpu_get_clock_locked.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1382977938-13844-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

When we translate the virtual address to physical check for error.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This lets threads other than the I/O thread use vm_clock even in -icount mode.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Computing the deadline of all vm_clocks is somewhat expensive and calls
out to qemu-timer.c; two reasons not to do it in the seqlock's write-side
critical section.  This however opens the door for races in setting and
reading vm_clock_warp_start.

To plug them, we need to cover the case where a new deadline slips in
between the call to qemu_clock_deadline_ns_all and the actual modification
of the icount_warp_timer.  Restrict changes to vm_clock_warp_start and
the icount_warp_timer's expiration time, to only move them back (which
would simply cause an early wakeup).

If a vm_clock timer is cancelled while CPUs are idle, this might cause the
icount_warp_timer to fire unnecessarily.  This is not a problem, after it
fires the timer becomes inactive and the next call to timer_mod_anticipate
will be precise.

In addition to this, we must deactivate the icount_warp_timer _before_
checking whether CPUs are idle.  This way, if the "last" CPU becomes idle
during the call to timer_del we will still set up the icount_warp_timer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To prepare for future code changes, move the increment of qemu_icount_bias
outside the "if" statement.

Also, hoist outside the if the check for timers that expired due to the
"warping".  The check is redundant when !runstate_is_running(), but
doing it this way helps because the code that increments qemu_icount_bias
will be a critical section.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will help later when we will have to place these calls in
a critical section, and thus call a version of cpu_get_icount()
that does not take the lock.
Reviewed-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

QEMU_CLOCK_VIRTUAL may be read outside BQL. This will make its
foundation, i.e. cpu_clock_offset exposed to race condition.
Using private lock to protect it.

After this patch, reading QEMU_CLOCK_VIRTUAL is thread safe
unless use_icount is true, in which case the existing callers
still rely on the BQL.

Lock rule: private lock innermost, ie BQL->"this lock"
Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It was introduced to loop over CPUs from target-independent code, but
since commit 182735ef target-independent
CPUState is used.

A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.

The CPU to receive the RESTART interrupt is the "default" one.

There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".

In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
   "default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NAlexander Graf <agraf@suse.de>

Rearrange timer.h so it is in order by function type.

Make legacy functions call non-legacy functions rather than vice-versa.

Convert cpus.c to use new API.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Notify all timerlists derived from vm_clock in icount warp
calculations.

When calculating timer delay based on vm_clock deadline, use
all timerlists.

For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.

NB: thread safety - when different timerlists sit on different
threads, this will need some locking.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

It makes more sense and will make things simpler later.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Propagate X86CPU in kvmvapic for simplicity.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for changing cpu_single_step() argument to CPUState.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Even if the VM is already stopped, we cannot assume that all data has
already been successfully flushed to disk. The flush during the previous
vm_stop() could have failed.

Run bdrv_flush_all() unconditionally so that we get an error each time
if the block device isn't really flushed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If flushing the block devices fails, return an error. The VM is stopped
anyway.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Introduce an asynchronous version of run_on_cpu() i.e. the caller
doesn't have to block till the call back routine finishes execution
on the target vcpu.
Signed-off-by: NChegu Vinod <chegu_vinod@hp.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move it to qom/cpu.h.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.

However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.

Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>

This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Pass it to qemu_dummy_cpu_thread_fn().
Use CPUState::env_ptr for cpu_single_env.

Prepares for changing qemu_init_vcpu() argument to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Pass it on to qemu_kvm_cpu_thread_fn().

Prepares for changing qemu_init_vcpu() argument to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed.

Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use CPUState::env_ptr for now.

Prepares for changing cpu_handle_guest_debug() argument to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It no longer uses CPUArchState.

Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpustats monitor command available unconditionally.

Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed.

Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer needed.

Prepares for changing qemu_kvm_init_cpu_signals() argument to CPUState.
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It no longer uses CPUArchState.

Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It no longer needs CPUArchState.

Prepares for changing all_cpu_threads_idle() CPU loop to CPUState and
needed for changing qemu_kvm_wait_io_event() argument to CPUState.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It no longer depends on CPUArchState, so move it to qom/cpu.c.

Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change Monitor::mon_cpu to CPUState as well.
Reviewed-by: Nliguang <lig.fnst@cn.fujitsu.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>