- 22 10月, 2010 12 次提交
-
-
由 Kevin Wolf 提交于
The werror option now affects not only write requests, but also flush requests. Previously, it was not possible to stop a VM on a failed flush. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Instead of always assuming success for bdrv_aio_flush, actually do something with the error. This respects the werror option and accordingly ignores the error, reports it to the guest or stops the VM and retries after cont. Ignoring the error is trivial, obviously. For stopping the VM and retrying later old code can be reused, but we need to introduce a new status for "retry a flush". For reporting to the guest, fortunately the same action is required as for a failed read/write (status = DRDY | ERR, error = ABRT), so this code can be reused as well. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The next patch reuses this code, so put it in its own function. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The old -B option caused a backing file to be used for the converted image and to avoid copying clusters from the old backing file. When replaced with -obacking_file, qemu-img convert does assign the backing file to the new image, but it doesn't realize that it should avoid copying clusters from the backing file. This patch checks the -o options for a backing_file and applies the same logic as for -B in this case. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Weil 提交于
Adding the gcc format attribute detects a format bug which is fixed here. v2: Don't use type cast. BDRV_SECTOR_SIZE is unsigned long long, so %lld should be the correct format specifier. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The new map command in qemu-io lists all allocated/unallocated areas in an image file. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 edison 提交于
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage. The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img. Right now, it only supports to copy the full snapshot, delta snapshot is on the way. Changes from V1: all the comments from Kevin are addressed: Add read-only checking Fix coding style Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp Signed-off-by: NDisheng Su <edison@cloud.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Christoph Hellwig 提交于
ATA does not only have the WCACHE enabled bit in identify word 85, but also a WCACHE supported bit in word 82. While the Linux kernel is fine with the latter at least hdparm also needs the former before correctly displaying the cache settings. There's also a non-zero chance other operating systems are more picky in their volatile write cache detection. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
They have been #ifdef'd out by the previous patch. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Instead of doing lots of magic for setting up initial refcount blocks and stuff create a minimal (inconsistent) image, open it and initialize the rest with regular qcow2 functions. This is a complete rewrite of the image creation function. The old implementating is #ifdef'd out and will be removed by the next patch (removing it here would have made the diff unreadable because diff tries to find similarities when it's really a rewrite) Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
The L1 table grow operation includes a size calculation that bumps up the new L1 table size in order to anticipate the size needs of vmstate data. This helps reduce the number of times that the L1 table has to be grown when vmstate data is appended. This size overhead is not necessary during image creation, bdrv_truncate(), or snapshot goto operations. In fact, existing qemu-iotests that exercise table growth are no longer able to trigger it because image creation preallocates an L1 table that is too large after changes to qcow_create2(). This patch keeps the size calculation but also adds exact growth for callers that do not want to inflate the L1 table size unnecessarily. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Samuel Thibault 提交于
control-{@[\]^_} shouldn't get the 'a' - 'A' offset for correct translation. ESC is better simulated as escape key. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NAndrew Zaborowski <balrogg@gmail.com>
-
- 21 10月, 2010 28 次提交
-
-
由 Gleb Natapov 提交于
SCI is level triggered. pci hotplug should behave appropriately. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gleb Natapov 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Marcelo Tosatti 提交于
From: Avi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's commit 1bab5d11545d8de5facf46c28630085a2f9651ae Author: Huang Ying <ying.huang@intel.com> Date: Wed Mar 3 16:52:46 2010 +0800 Add savevm/loadvm support for MCE MCE registers are saved/load into/from CPUState in kvm_arch_save/load_regs. To simulate the MCG_STATUS clearing upon reset, MSR_MCG_STATUS is set to 0 for KVM_PUT_RESET_STATE. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef Author: Huang Ying <ying.huang@intel.com> Date: Mon Sep 21 10:43:25 2009 +0800 MCE: Relay UCR MCE to guest UCR (uncorrected recovery) MCE is supported in recent Intel CPUs, where some hardware error such as some memory error can be reported without PCC (processor context corrupted). To recover from such MCE, the corresponding memory will be unmapped, and all processes accessing the memory will be killed via SIGBUS. For KVM, if QEMU/KVM is killed, all guest processes will be killed too. So we relay SIGBUS from host OS to guest system via a UCR MCE injection. Then guest OS can isolate corresponding memory and kill necessary guest processes only. SIGBUS sent to main thread (not VCPU threads) will be broadcast to all VCPU threads as UCR MCE. aliguori: fix build Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Huang Ying 提交于
In QEMU-KVM, physical address != RAM address. While MCE simulation needs physical address instead of RAM address. So kvm_physical_memory_addr_from_ram() is implemented to do the conversion, and it is invoked before being filled in the IA32_MCi_ADDR MSR. Reported-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
To be used by next patches. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's MCE support commit c68b2374c9048812f488e00ffb95db66c0bc07a7 Author: Huang Ying <ying.huang@intel.com> Date: Mon Jul 20 10:00:53 2009 +0800 Add MCE simulation support to qemu/kvm KVM ioctls are used to initialize MCE simulation and inject MCE. The real MCE simulation is implemented in Linux kernel. The Kernel part has been merged. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Block SIGALRM, SIGIO and consume them via signalfd. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Port qemu-kvm's signalfd compat code. commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5 Author: Anthony Liguori <aliguori@us.ibm.com> Date: Wed May 7 11:55:47 2008 -0500 Use signalfd() in io-thread This patch reworks the IO thread to use signalfd() instead of sigtimedwait() This will eliminate the need to use SIGIO everywhere. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the svm cpuid feature flags to the qemu intialization path. It also adds the svm features available on phenom to its cpu-definition and extends the host cpu type to support all svm features KVM can provide. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch cleans the (stack-allocated) cpuid definition to 0 before actually initializing it. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Markus Armbruster 提交于
-Wall enables a bunch of warnings at once. configure puts it after $gcc_flags. This makes it impossible to disable warnings enabled by -Wall there. Fix by putting configured flags last. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
When qemu is configured with --enable-debug-tcg, gcc throws this warning (or error with -Werror): tcg/tcg.c:1030: error: comparison of unsigned expression >= 0 is always true Fix it by removing the >= 0 part. The type cast to 'unsigned' catches negative values of op (which should never happen). This is a modification of Hollis Blanchard's patch. Cc: Hollis Blanchard <hollis@penguinppc.org> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Gerd Hoffmann 提交于
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so it actually receives events. Also make sure we only remove the handler if we registered it before. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
This patch updates the vmmouse handler registration and activation. Old behavior: vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute unregister the handler and re-register it. New behavior: vmmouse_request_relative and vmmouse_request_absolute will unregister the handler in case the mode did change. Then register and active the handler with current mode if needed. Note that the old code never ever *activates* the handler, so the vmmouse doesn't receive events. This trips up Fedora 14 for example: Boot a default install without usb tablet, watch the X-Server activating the vmmouse then, enjoy a non-functional mouse. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Sanchit Garg 提交于
readv & writev, read & write respectively from the current offset of the file & hence their use has to be preceeded by a call to lseek. preadv/writev can be used instead, as they take the offset as an argument. This saves one system call( lseek ). In case preadv is not supported, it is implemented by an lseek followed by a readv. Depending upon the configuration of QEMU, the appropriate read & write methods are selected. This patch also fixes the zero byte read/write bug & obviates the need to apply a fix for that bug separately. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NSanchit Garg <sancgarg@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Harsh Prateek Bora 提交于
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
We would need this to make sure we handle the mapped security model correctly for different xattr names. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
The O_DIRECT flag imposes alignment restrictions on the length and address of userspace buffers and the file offset of I/Os. While VirtFS/9P has plans to implement O_DIRECT behavior on the server, for now we will stick to a behavior like NFS by bypassing the page cache only on the client. Server may still cache the I/O. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TReadlink tag[2] fid[4] size[4] RReadlink tag[2] target[s] Description Readlink is used to return the contents of the symoblic link referred by fid. Contents of symboic link is returned as a response. target[s] - Contents of the symbolic link referred by fid. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
SYNOPSIS size[4] Tfsync tag[2] fid[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TGetlock tag[2] fid[4] getlock[n] size[4] RGetlock tag[2] getlock[n] Description TGetlock is used to test for the existence of byte range posix locks on a file identified by given fid. The reply contains getlock structure. If the lock could be placed it returns F_UNLCK in type field of getlock structure. Otherwise it returns the details of the conflicting locks in the getlock structure getlock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file proc_id[4] - process id that wants to take lock/owns the task in case of reply client[4] - Client id of the system that owns the process Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
Synopsis size[4] TLock tag[2] fid[4] flock[n] size[4] RLock tag[2] status[1] Description Tlock is used to acquire/release byte range posix locks on a file identified by given fid. The reply contains status of the lock request flock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK flags[4] - Flags could be either of P9_LOCK_FLAGS_BLOCK(1) - Blocked lock request, if there is a conflicting lock exists, wait for that lock to be released. P9_LOCK_FLAGS_RECLAIM(2) - Reclaim lock request, used when client is trying to reclaim a lock after a server restrart (due to crash) start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock client_id[4] - Unique client id status[1] - Status of the lock request, can be P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or P9_LOCK_GRACE(3) P9_LOCK_SUCCESS - Request was successful P9_LOCK_BLOCKED - A conflicting lock is held by another process P9_LOCK_ERROR - Error while processing the lock request P9_LOCK_GRACE - Server is in grace period, it can't accept new lock requests in this period (except locks with P9_LOCK_FLAGS_RECLAIM flag set) Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Sripathi Kodi 提交于
When 9P server fails to create a file due to permission problems it should return EPERM. However the current 9P2000.L code returns EBADF. EBADF is NOT a valid return value from open() call. The problem is because we do not preserve the errno variable properly. If the file open had failed, the call to close() on the fd in v9fs_post_lcreate() fails and sets errno to EBADF. We should preserve the errno that we got from open() and we should call close() only if we had a valid fd. Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com> Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
-
由 Blue Swirl 提交于
Use PRI*64 to print full 64 bit data even on ILP32 hosts. Print also sixth tracepoint parameter. Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-