Instead of having unlink() calls in the generic block layer, where we
aren't even guarateed to have a file name, move them to those block
drivers that are actually used and that always have a filename. Gets us
rid of some #ifdefs as well.

The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open
flag so that it is inherited in the protocol layer and the raw-posix and
raw-win32 drivers can unlink the file.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Copy on Read makes sense on the format level where backing files are
implemented, but it's not required on the protocol level. While it
shouldn't actively break anything to have COR enabled on both layers,
needless serialisation and allocation checks may impact performance.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of manipulation flags inline, move the derivation of the flags
of a backing file into a new function next to the existing functions
that derive flags for bs->file and for the block driver open function.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Instead of having bdrv_open_flags() as a function that creates flags for
several unrelated places and then adding open-coded flags on top, create
a new function that derives the flags for bs->file from the flags for bs.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Add a test which discards a compressed cluster on qcow2. This should
work without any problems.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

discard_single_l2() should not implement its own version of
qcow2_get_cluster_type(), but rather rely on this already existing
function. By doing so, it will work for compressed clusters as well
(which it did not so far).

Also, rename "old_offset" to "old_l2_entry", as both are quite different
(and the value is indeed of the latter kind).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Both tests 019 and 086 need proper quotations to work with pathnames
that contain spaces.
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The _rm_test_img() function in common.rc did not quote the image
file, which left droppings in the scratch directory (and performed
a potentially unsafe rm -f).

This adds the necessary quotes.
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_get_info could fail. Add check before using the returned value.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The direct return will skip releasing of all the resouces at
immediate_exit, don't miss that.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Some block drivers have multiple BlockDriver instances with identical
format_name fields (e.g. gluster, nbd).

Both qemu-img and qemu will use bdrv_iterate_format() to list the
supported formats when a help option is invoked.  As protocols and
formats may register multiple drivers, redundant listings of formats
occur (e.g., "Supported formats: ... gluster gluster gluster gluster ...
").

Since the list of driver formats will be small, this performs a simple
linear search on format_name, and ignores any duplicates.

The end result change is that the iterator will no longer receive
duplicate string names, nor will it receive NULL pointers.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This allows qemu-img to print out version information, without
needing to print the long help wall of text.

While there, perform some minor whitespace cleanup, and remove the
unused option_index variable in the call to getopt_long().
Reported-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Although bdrv_getlength() was just called above this, and checked for
error, it is better to just use the value we already get, and use
DIV_ROUND_UP.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This fixes a bug introduced in commit ac1307ab, that caused the
'--help' option to not be recognized as a valid command, and not
print any help.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

* remotes/otubo/seccomp:
  seccomp: add shmctl(), mlock(), and munlock() to the syscall whitelist
  seccomp: add timerfd_create and timerfd_settime to the whitelist
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

trivial patches for 2014-04-28

# gpg: Signature made Mon 28 Apr 2014 05:56:01 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-04-28:
  slirp/smb: Move ncalrpc directory to tmp
  po: add proper Language: tags to .po files
  po/Makefile: fix $SRC_PATH reference
  init_paths: fix minor memory leak
  virtfs-proxy-helper: fix call to accept
  net/net.c: remove unnecessary semicolon
  Add QEMU logo (SVG file)
  vl: avoid closing stdout with 'writeconfig'
  xilinx: Fix typo in comment (Marvel -> Marvell)
  vl: Eliminate a superfluous local variable
  vl: Remove useless 'continue'
  gitignore: cleanups #2
  tests/.gitignore: Ignore test-rfifolock
  move test-* from .gitignore to tests/.gitignore
  configure: Improve help behavior
  vl: convert -m to QemuOpts
  qemu-option: introduce qemu_find_opts_singleton
  misc: Use cpu_physical_memory_read and cpu_physical_memory_write
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/qmp-unstable/queue/qmp:
  monitor: fix qmp_getfd() fd leak in error case
  HMP: support specifying dump format for dump-guest-memory
  HMP: fix doc of dump-guest-memory
  qmp: object-add: Validate class before creating object
  monitor: Add device_add and device_del completion.
  monitor: Add command_completion callback to mon_cmd_t.
  monitor: Fix drive_del id argument type completion.
  error: Remove some unused headers
  qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
  qerror.h: Remove QERR defines that are only used once
  qerror.h: Remove unused error classes
  error: Print error_report() to stderr if using qmp
  monitor: Remove unused monitor_print_filename
  error: Privatize error_print_loc
  vnc: Remove default_mon usage
  slirp: Remove default_mon usage
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block pull request

# gpg: Signature made Fri 25 Apr 2014 17:05:13 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  iscsi: Don't use error_is_set() to suppress additional errors
  blockdev: Clean up fragile use of error_is_set()
  nbd: Use return values instead of error_is_set(errp)
  qemu-img: Consistently name Error * objects err, and not errp
  Use error_is_set() only when necessary (again)
  block: Expose host_* drivers in blockdev-add
  MAINTAINERS: Add qemu-img/io to block subsystem
  qemu-iotests: Improve and make use of QMPTestCase.wait_until_completed()
  doc: add -drive rerror=,werror= to qemu --help output
  block: Prevent coroutine stack overflow when recursing in bdrv_open_backing_file.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Net patches

# gpg: Signature made Fri 25 Apr 2014 15:07:31 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  net: Don't use error_is_set() to suppress additional errors
  net: Make qmp_query_rx_filter() with name argument more obvious
  net: xilinx_axienet.c: Add phy soft reset bit clearing
  net/net.c: Remove unnecessary semicolon
  pcnet: remove duplicate assignment
  tap: Avoid extra iterations while closing file fd
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some s390x patches:

- gdb stubs to make it compile if gdb support is pulled in
- linux-headers update for new oneregs
- two onereg enhancements

# gpg: Signature made Fri 25 Apr 2014 12:42:46 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20140425:
  s390x/kvm: sync gbea and pp register
  s390x/kvm: rework KVM synchronize to tracing for some ONEREGS
  linux-headers update
  s390x: empty function stubs in preparation for __KVM_HAVE_GUEST_DEBUG
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The smbd forked by qemu still uses the default ncalrpc directory
in /var/run/samba. This may lead to problems, if /var/run/samba
does not exist (for example if /var/run is a tmpfs and the host
smbd was not started).

This leads to the following error message from samba
and an unworkable smbd:
	Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory

Fix this by pointing smbd to /tmp/qemu-smb.%d.%d/ncalrpc as ncalrpc directory.
Smbd will create the actual ncalrpc subdirectory on its own.
Signed-off-by: NMichael Buesch <m@bues.ch>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
(Applying this to -trivial because it _is_ rather trivial
 and because Jan does not reply for months)

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The rule for messages.po appears to be slightly wrong.
Move the `cd' command within parens.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Tested-by: NStefan Weil <sw@weilnetz.de>

Fields "name" (created with strdup in new_entry) and "pathname"
(created with g_strdup_printf in new_entry) of pathelem struct should
be freed before the whole struct is.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The current code calls accept() without initializing the size parameter
which means the accept call might write too much to the stack.

URL: https://bugs.gentoo.org/486714Signed-off-by: NTim Comer <comer0@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NIgor Ryzhov <iryzhov@arccn.ru>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The "Q" of the logo is already included in pc-bios/qemu_logo_no_text.svg.

This file now adds the complete logo as it was designed by Benoît Canet.
Benoît licensed it under CC-BY 3.0, see
http://lists.gnu.org/archive/html/qemu-devel/2012-02/msg02865.html.

Unneeded borders from Benoît's original logo were removed,
and metadata (license, author, date) was added in this version.

Cc: Benoît Canet <benoit@irqsave.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

'writeconfig' supports output to stdout (with '-'); when that happens,
we must not close stdout, or further command line options that also use
stdout will be impacted. (Although 'writeconfig' was copied from
'readconfig', the latter does not have the problem because it does not
support reading from '-')
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

CODING_STYLE frowns upon mixing declarations and statements.  main()
has such a declaration.  Clean up by eliminating the variable.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

"This if else has no code between it and the end of the enclosing
while loop. This makes this continue redundant."
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

A few more cleanups for .gitignore file.
The final goal is to have only files in there which
are generated during build.  Things like .orig or
.gdbinit are definitely not generated during build.
Also, anchor a few more build-time directories.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Also sort the test-* entries in the latter.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Old:
There are two paths to show help and exit 1, one is with "-h" or
"--help", one is with invalid options.

New:
Show help and exit 0 for --help.
On invalid option, don't show the long help and bury the early "ERROR:"
line, just give a message pointing to --help.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Adds option to -m
 "size" - startup memory amount

For compatibility with legacy CLI if suffix-less number is passed,
it assumes amount in Mb.

Otherwise user is free to use suffixed number using suffixes b,k/K,M,G
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

These functions don't need type casts (as does cpu_physical_memory_rw)
and also make the code better readable.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Additional testing reveals that PulseAudio requires shmctl() and the
mlock()/munlock() syscalls on some systems/configurations.  As before,
on systems that do require these syscalls, the problem can be seen with
the following command line:

  # qemu -monitor stdio  -sandbox on \
         -device intel-hda -device hda-duplex
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com>

libusb calls timerfd_create() and timerfd_settime() when it's built with
timerfd support.

Command to reproduce:

       -device usb-host,hostbus=1,hostaddr=3,id=hostdev0

Log messages:

audit(1390730418.924:135): auid=4294967295 uid=121 gid=103 ses=4294967295
                           pid=5232 comm="qemu-system-x86" sig=31 syscall=283
                           compat=0 ip=0x7f2b0f4e96a7 code=0x0
audit(1390733100.580:142): auid=4294967295 uid=121 gid=103 ses=4294967295
                           pid=16909 comm="qemu-system-x86" sig=31 syscall=286
                           compat=0 ip=0x7f03513a06da code=0x0

Reading a few hundred MB from a USB drive on x86_64 shows this syscall distribution.
Therefore the timerfd_settime priority is set to 242.

    calls  syscall
 --------- ----------------
   5303600 write
   2240554 read
   2167030 ppoll
   2134828 ioctl
    704023 timerfd_settime
    689105 poll
     83122 futex
       803 writev
       476 rt_sigprocmask
       287 recvmsg
       178 brk
Signed-off-by: NFelix Geyer <debfx@fobos.de>
Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com>