MEMCTL SR controls zero overhead loop buffer and number of ways enabled
in L1 caches.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

RUNSTALL signal stalls core execution while it's applied. It is widely
used in multicore configurations to control activity of additional
cores.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Xtensa cores may have two distinct addresses for the static vectors
group. Provide a function to select one of them.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: NThomas Huth <thuth@redhat.com>

Modify all CPUs to call it from XXX_cpu_realizefn() function.

Remove all the cannot_destroy_with_object_finalize_yet as
unsafe references have been moved to cpu_exec_realizefn().
(tested with QOM command provided by commit 4c315c27)

for arm:

Setting of cpu->mp_affinity is moved from arm_cpu_initfn()
to arm_cpu_realizefn() as setting of cpu_index is now done
in cpu_exec_realizefn(). To avoid to overwrite an user defined
value, we set it to an invalid value by default, and update
it in realize function only if the value is still invalid.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

exec-all.h contains TCG-specific definitions.  It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.

One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 57cb38b3 included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-29-git-send-email-peter.maydell@linaro.org

Several devices don't survive object_unref(object_new(T)): they crash
or hang during cleanup, or they leave dangling pointers behind.

This breaks at least device-list-properties, because
qmp_device_list_properties() needs to create a device to find its
properties.  Broken in commit f4eb32b5 "qmp: show QOM properties in
device-list-properties", v2.1.  Example reproducer:

    $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}}
    { "execute": "qmp_capabilities" }
    {"return": {}}
    { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } }
    qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.
    Aborted (core dumped)
    [Exit 134 (SIGABRT)]

Unfortunately, I can't fix the problems in these devices right now.
Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet
to mark them:

* Hang during cleanup (didn't debug, so I can't say why):
  "realview_pci", "versatile_pci".

* Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic",
  "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such
  CPUs

* Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu",
  "host-powerpc64-cpu", "host-embedded-powerpc-cpu",
  "host-powerpc-cpu" (the powerpc ones can't currently reach the
  assertion, because the CPUs are only registered when KVM is enabled,
  but the assertion is arguably in the wrong place all the same)

Make qmp_device_list_properties() fail cleanly when the device is so
marked.  This improves device-list-properties from "crashes, hangs or
leaves dangling pointers behind" to "fails".  Not a complete fix, just
a better-than-nothing work-around.  In the above reproducer,
device-list-properties now fails with "Can't list properties of device
'pxa2xx-pcmcia'".

This also protects -device FOO,help, which uses the same machinery
since commit ef523587 "qdev-monitor: include QOM properties in -device
FOO, help output", v2.2.  Example reproducer:

    $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help

Before:

    qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed.

After:

    Can't list properties of device 'pxa2xx-pcmcia'

Cc: "Andreas Färber" <afaerber@suse.de>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Green <green@moxielogic.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Jia Liu <proljc@gmail.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>

The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.

Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Depending on access type raise either InstrPIFDataError or
LoadStorePIFDataError exception.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

GDB assumes that watchpoint set via the gdbstub remote protocol will
behave in the same way as hardware watchpoints for the target. In
particular, whether the CPU stops with the PC before or after the insn
which triggers the watchpoint is target dependent. Allow guest CPU
code to specify which behaviour to use. This fixes a bug where with
guest CPUs which stop before the accessing insn GDB would manually
step forward over what it thought was the insn and end up one insn
further forward than it should be.

We set this flag for the CPU architectures which set
gdbarch_have_nonsteppable_watchpoint in gdb 7.7:
ARM, CRIS, LM32, MIPS and Xtensa.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: NMax Filippov <jcmvbkbc@gmail.com>
Tested-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Michael Walle <michael@walle.cc> (for lm32)
Message-id: 1410545057-14014-1-git-send-email-peter.maydell@linaro.org

Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NMax Filippov <jcmvbkbc@gmail.com>
Message-id: 1410626734-3804-8-git-send-email-rth@twiddle.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the debug_excp_handler target specific hook into a QOM
CPU method.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We will reference it from more files in the next patch.  To avoid
ruining the small steps we're making towards multi-target, make
it a method of CPU rather than just a global.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Default to false.

Tidy variable naming and inline cast uses while at it.

Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Commit c643bed9 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".

The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
 ->x86_cpu_apic_realize
  ->qdev_init
   ->device_set_realized
    ->device_reset (hotplugged == 1)
     ->apic_reset_common
      ->vapic_base_update
       ->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.

By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.

As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Completes migration of target-specific code to new target-*/gdbstub.c.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.

Allows building gdb_register_coprocessor() for xtensa, too.

As a side effect this should fix coprocessor register numbering for SMP.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Register a CPU type per core registered. Save the XtensaConfig in
XtensaCPUClass and copy it from there to CPUXtensaState, to avoid
touching every env->config access for now.

Prepares for storing per-class GDB register count.
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change breakpoint_invalidate() argument to CPUState alongside.

Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().

Prepares for changing cpu_memory_rw_debug() argument to CPUState.

Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpustats monitor command available unconditionally.

Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.

It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.

The field may not be called "env" due to it being poisoned.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Combine this with breakpoint handler registration, guarding both with
tcg_enabled() to suppress also TCG init for qtest. Rename the handler to
xtensa_breakpoint_handler() since it needs to become global.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Introduce realizefn and set realized = true in cpu_xtensa_init().
Signed-off-by: NAndreas Färber <afaerber@suse.de>

There was no CPU_SAVE_VERSION defined, so neither "cpu_common" VMState
nor cpu_{save,load}() were registered. Their implementation was no-op.
Therefore there is no backwards compatibility to keep, so mark XtensaCPU
as unmigratable at device level.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

In XEA1, the Options for Memory Protection and Translation and the
corresponding TLB management instructions are not available. Instead,
functionality similar to the Region Protection Option is available
through the cache attribute register. See ISA, A.2.14 for details.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory
type. See ISA, 4.3.12.4 for details.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make the include paths for cpu-qom.h consistent to allow using XtensaCPU
in cpu.h.

Turn cpu_init macro into a static inline function returning
CPUXtensaState for backwards compatibility.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>

Move XtensaConfig-independent code from cpu_xtensa_init() into a
QOM initfn, as a start.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Move code from cpu_state_reset() into QOM xtensa_cpu_reset().
To avoid moving reset_mmu() and dependencies, make it non-static.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Embed CPUXtensaState as first member of XtensaCPU.
Let CPUClass::reset() call cpu_state_reset() for now.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>